Dimethyl carbonate is abbreviated as DMC. At room temperature, it is a colorless, transparent, pungent odorous liquid. The relative density (d204) is 1.0694, the melting point is 4C, the boiling point is 90.3C, the flash point is 21.7C (opening), 16.7C (closed) ), refractive index (nd20Chemicalbook) 1.3687, flammable, non-toxic. It can be mixed with almost all organic solvents such as alcohol, and ester in any ratio, and is slightly soluble in water. Can be used as a methylating agent. Compared with other methylation reagents, such as methyl iodide and dimethyl sulfate, dimethyl carbonate is less toxic and biodegradable. The physical and chemical properties: Model NO. 99% Molecular weight� 60.1g/mol Hydroxyl No. Monohydroxy Appearance Colorless Liquid Available chlorine content 2-13.4%(V) Properties Miscible Storage condition Flammables area Freezing point -89.5C Applications: 1. A new type of low-toxicity solvent can replace solvents such as toluene, xylene, ethyl acetate, butyl acetate, acetone or methyl ethyl ketone in the paint and adhesive industries. It is an environmentally friendly green chemical product. 2. Good methylating agent, carbonylating agent, hydroxymethylating agent and methoxylating agent are a kind of chemical raw materials with a wide range of uses. 3. Chemicalbook wants to replace phosgene, dimethyl sulfate, methyl chloroformate and other highly toxic drugs. 4. Synthetic polycarbonate, diphenyl carbonate, isocyanate, etc. 5. In medicine, it is used to synthesize anti-infective drugs, antipyretic and analgesic drugs, vitamin drugs, and central nervous system drugs. 6. Pesticides are mainly used to produce methyl isocyanate, and then to produce certain carbamate drugs and insecticides (anisole). 7. Gasoline additives, lithium battery electrolyte, etc.
DMC
Good Price 30% LDAO Lauryl Dimethyl Amine Oxide CAS 1643-20-5 Product details Chemical Name: Lauryl dimethyl amine oxide Code: LDAO 30% Other Name: N,N-dimethyldodecylamine-N-oxid CAS NO.: 1643-20-5 Formula: C14H31NO Purity : 30% LDAO at room temperature is a colorless or yellowish transparent liquid, is a special type of surfactant, it becomes cationic in acidic medium, and in neutral or alkaline medium is non-ionic. In addition to own the general surface active agent properties, but also has excellent solubilization, thickening, emulsification, foaming, stable foam, soft, moisturizing, antistatic, good compatibility with human skin, the slightly physiological toxicity, easy to biodegradation.And it has certain bactericidal properties and mildew - proof effect Product properties 1. Excellent antistatic, softening, foam-stabilizing performance. 2. Mild to skin. Make cloth soft and smooth, make hair soft, easy to comb, glossy and shiny. 3. Bleach stable. Good ability of thickening and solubilizing to keep product stable. 4. Good ability of sterilizing and dispersing calcium soap, good biodegradability. 5. Be compatible with anioncic, cationic, amphoteric and nonionic surfactants. 6. Especially suitable for shampoos, bath washes, dish washing detergents Application Lauryl Dimethyl Amine Oxide used as detergent, emulsifier, wetting agent, foaming agent, softener, milling agent and dyeing auxiliary. Also can be used as sterilizing agent and antistatic agent, as a coagulant during metal plating, as an initiating agent or inhibiting agent in polymerization, as an emulsifying agent or moisturizing agent in cosmetics; otherwise, it can be used as an antirust agent for metal. Packing & Storage Packing: Package: 200kg/drum, 80 drums * 20FCL 1000kg/IBC, 20 IBCs * 20FCL Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture. Ambient temperature is10-50, the container to be sealed. It is not advisable to use containers of copper material. Recommended storage in plastic containers; a shelf life of two years. Specification Product Lauryl Dimethyl Amine Oxide(LDAO 30%) CAS# 1643-20-5 Batch No 220310-10 Quantity: 28000KG Date of manufacturing Mar. 10th, 2022 Date of expire Mar. 9th, 2023 Iteam Specification Results Appearance Light yellow clean liquid Confirms Active matter % 29 ~ 32 30.1 Free amine (%) 0.70 0.26 Free peroxide (%) 0.50 0.08 Color (APHA) 100 42 PH value ( 10% solu,25 6.0 ~ 8.0 7.5 Conclusion Qualified
Iodophor Ingredients: Iodine, dimethyl dodecyl amine oxide, quaternary ammonium salt, non-ionic surfactant, etc. Raw Material Assay: Iodine 5% The common name of the preparations: Iodine trioxide Administration & Dosage of the Preparations: Iodine 3%. Characterization Appearance and usage Reddish brown sticky liquid; its aqueous solution is acidic, foams produce when shaken. It is easily soluble in water or ethanol. It can be dissociated into cationic active species with reactive oxygen and active iodine in the aqueous solution, which has cleaning function. Pharmacological effects It is the complex compound of four alkyl amine reactive oxygen species and iodine, added the special synergist. It is stable and has no impurity. Precautions The preparations wrappers: should be fitted with brand new dark PET/HDPE with plastic inner lid. The Process of making preparations: when you fill the dilution into the container, the foam will be produced. Therefore, the self-priming filling machine is not appropriate. Please be attention the requirement of the preparation's pH value. The requirement of water quality: deionized water would be best. Don't make it with the high hardness tap-water and alkaline water.
Fumaric Acid powder, E297,CAS No.110-17-8, food acidulent, a common food additive included in many processed foods to keep them stable and to add tartness. Fumaric acid is used as a flavoring, because it is the sourest tasting of the organic acids. used as a food acidulent, in Bakery:Tortillas,Breads; Beverages: Fruit Juice Drinks, Wine; Confectioneries:Jellies and Jams;Desserts:Alginate Based Desserts,Gelatin Desserts,Pie Fillings,Egg White Foams; Animal Feed and Industrial Uses. As an experienced Fumaric Acid manufacturer and supplier, we has been supplying and exporting Fumaric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Fumaric Acid Food Grade Specification DESCRIPTION White, odorless granules or crystalline powder. It is soluble in alcohol, slightly soluble in water and in ether, and very slightly soluble in chloroform Chemical Name Trans-butenedioic acid Chemical Formula C4H4O4 Structural Formula Molecular Weight 116.07 Solubility (g/100g) in water at 25 0.7 in water at 100 9.8 in alcohol at 30 5.76 in dimethyl benzene at 20 0.03 SPECIFICATION (Executive Standard: GB 25546-2010,also meets the international standards of FCC,USP ect.) Assay(as C4H4O4) 99.5%~100.5%(anhydrous basis) Melting Point 294~300 Arsenic(as As) 2mg/kg Max Lead 2mg/kg Max Maleic Acid 0.1% Max Residue on Ignition 0.1% Max Water 0.5% Max
Sugar Esters E473, CAS No.37318-31-3 , commonly known as Sucrose esters of fatty acids, manufacturing process by esterifying sucrose with fatty acids. By varying the degree of esterification of the sucrose molecule it is possible to obtain emulsifiers with HLB values ranging from 1 up to 16. It is a light yellow powder, a non-ionic surfactant and is used as an emulsifier in dairy products, baked goods, soft drinks, jelly, cake and candy. Sucrose Fatty Acid Esters are a mixture of mono-, di-, and tri-esters of sucrose with fatty acids derived from edible vegetable or hydrogenated vegetable oils and fats. As an experienced Sugar Esters manufacturer and supplier, we has been supplying and exporting Sugar Esters for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sugar Esters powder Specification ITEM STANDARD RESULTS APPERANCE White crystal powder Conforms ACID VALUE (AS KOHMG/G) Not more than 6 3.0 ARSENIC (AS)MG/KG Not more than Less than 1.0 LEAD (PB) MG/KG Not more than Less than 2.0 CADMIUM MG/KG Not more than Less than1 MERCURY MG/KG Not more than Less than1 OTHER SOLVENT Isopropy 350ppm(incombination) Pass Ethyl acetate 126.7-128C Propylene glycol Pass Isobutyl alcohol 10ppm Pass Methy alcohol 10ppm Pass Methyl Ethyl Ketone 10ppm Pass DIMETHYL SULFOXIDE sulfoxide Not more than 2ppm Pass FREE SUGER(AS SUGER) % Not more that 5% 1.35 DIMETHYLFORMAMIDE Not more than 1ppm Pass WATERCONTENT% Not more than 4% 0.51 LOSS ON IGNITION % Not more that 4% 0.47 HLB VALUE 13
Dimethyl oxalate, Payment Terms : TT ( Telegraphic Transfer ) Net Banking Upfront Upon Proforma Invoice Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well. Dimethyl oxalate
dimethyl sulfoxide, Payment Terms : T/T, Bank or Wire Transfer Upfront Upon Proforma Invoice Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well. dimethyl sulfoxide ...
dimethyl formamide, Payment Terms : T/T, Bank or Wire Transfer Upfront Upon Proforma Invoice Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as wel
Brand Name : MERCK, Qualigens, RANKEM Product Grade : AR/ACS, EMPARTA, EMPLURA, ER, GC, HPLC, LR, SQ Pack Size : 1Lit, 2.5Lit, 500ml
Brand Name : MERCK, Qualigens, RANKEM ' Product Grade : AR/ACS, EMPARTA, EMPLURA, ER, GC, HPLC, LR, SQ Pack Size : 1Lit, 2.5Lit, 500ml
Appearance - clear liquid Water content - 0.05 Max SP.GR - 1.060-1.080 Purity - 99.5 Min Methanol - 0.50Max Ethylene Carbonate - ND
White colour powder,CAS Number 95-45-4 , Linear Formula CH3C(=NOH)C(=NOH)CH3 , Molecular Weight 116.12,assay �99%,mp :240-241 °C(lit.)
Molecular form: c8h16ncl Molecular weight: 104.04 Cas no.: 7398-69-8 Appearance: colorless, clear liquid Assay: 60.0% min Hazen: 50 max Packing: 200kg/drum Usage: widely used in oil chemical agents, waste water treatment, printing, paper making, pharmaceuticals, textile, leather and chemicals for daily use. 200kg/drum.
Product Name: Dimethyl Carbonate Origin: China Molecular Formula: C3H6O3 CAS No.: 616-38-6 EINECS No.: 210-478-4 Specification: 99.5%, 99.9% Packing: Iron drums of 200kg net each, or ISO tank Application: In organic synthesis ---as a substance or sol ven t in organic sy n thes is, instead of phosgene, dimethyle sulfate, ect ---called as "green chem ical" a nd "new cornerstone for or organic synthesis" In gasoline industry ---as a fuel additive Dimethyl Carbonate (DMC) is a strong contender to help the refining industry to meet the Clean Air Act specification for oxygen in gasoline. DMC (53.3% O) has about 3 times the oxygen content as methyl tert-butyl ether (MTBE, 18.2%) and its synthesis is not dependent upon oil.
Product Name: Dimethyl Carbonate Origin: China Molecular Formula: C3H6O3 CAS No.: 616-38-6 EINECS No.: 210-478-4 Specification: 99.5%, 99.9% Packing: Iron drums of 200kg net each, or ISO tank Application: In organic synthesis ---as a substance or sol ven t in organic sy n thes is, instead of phosgene, dimethyle sulfate, ect ---called as "green chem ical" a nd "new cornerstone for or organic synthesis" In gasoline industry ---as a fuel additive Dimethyl Carbonate (DMC) is a strong contender to help the refining industry to meet the Clean Air Act specification for oxygen in gasoline. DMC (53.3% O) has about 3 times the oxygen content as methyl tert-butyl ether (MTBE, 18.2%) and its synthesis is not dependent upon oil.
Purity-99% min Isotank,IBC & Drum packing
We are manufacturer of 1,3-Dimethyl-2-imidazolidinone DMI DMEU CAS No. 80-73-9 high performance solvent
Appearance Pale yellow liqud Colority(calculate as gardner) 10max Odor A little amine odor Content m/m 40%min Reducing power 6.5%min Free alkli m/m 0.05-0.5% Density g/m3 1.17-1.19 PH value 9.5-12.5 Nitrogen 5ppm max Cu+Mn 5ppm max 240kgs drums or 1200kgs IBCs
Crystallizing point(¡æ): 18.20 min Content(%): 99.9 min Water content(%):0.05 max Acid Value(mgKOH/g): 0.02 max Transmissity(400nm %): 97.0 min Refractive Index(20¡æ):1.4775-1.4790 Specific Gravity(20¡æ):1.1014 P H Value: 7.
