Columbite Ore Suppliers and Manufacturers

Lithium ore IN NATURA for lithium carbonate > Lithium hydroxide > Lithium spodumene The price for lithium carbonate and lithium hydroxide is index SMM minus 5%. Depending on the quantity per month in (MT) tons, the commission can be negotiated can be negotiated with the supplier, origin from Brazil The producer processes the extracted rock into sand for further processing. The quality then corresponds to 99.92 technical or 99.95 battery quality after further processing 99.95 battery quality. Lithium carbonate is supplied in these grades. Lithium hydroxide will reach 56%. Delivery as containerized goods Prices are CIF, require port of destination where the goods are to be delivered to - Buyer specifies quantities - Price renegotiation possible depending on quantity - need concrete information from the buyer about quantity - term of the supply contract, etc. - All questions will be answered by the manufacturer - Please submit your request or questions in writing - Link to the video of one of the manufacturer's stockpiles Offer on lithium (oxide + carbonate) IN NATURA: (the material is considered one of the best in the world!). It is not processed lithium carbonate... it is IN NATURA. 1) CONTENT: Li2CO3: 50-53% / Li2O: 2.0-2.5% / lithium silicate 46-48% (in this lithium silicate there are microparticles of spodumene and other microparticles). 2) GRANULOMETRY: 1.0-100mm (exactly as shown in the video). - QUANTITY: 50.000 - 55.000 MT PER MONTH (X12 MONTHS) - PRICE AND INCOTERM: ca. USD/TON CIF - Destination / Port? - TERMS OF PAYMENT: > Payment with LC: 30% upon order placement before loading, 70% in port before export > Payment with SBLC: also possible with TOP Bank positive credit report NATURA / raw product (ore) = the buyer processes it directly into the desired end product(s), e.g. lithium carbonate, lithium hydroxide, lithium spodumene For larger quantities of lithium ore, the buyer additionally filters out the microparticles of spodumene and other microparticles via his equipment and thus generates a greater profit through additional end products. Minimum purchase per month = 50 MT Info: the formula states that 1 ton yields 500 kg of end product plus rare earths Annual contract possible, price agreement possible directly with the owner / geologist for corresponding purchase quantities. Basic condition is NCNDA, LOI with quantity specification, desired term/delivery contract

Commodity: Zinc Ore Concentrated, Zn >40% To >52%. Rej. Zn 40.00% To >52.00% - Rej. Zn

Commodity: Manganese Ore Concentrated, Mn >46% to

We have direct products from mine like Copper Ore Concentrate, we Seller of Minerals commodities, we can supply regular 3,000 MT to 10,000 MT every 30 days contract for up to 36 months. We can sell in a situation: CIF, FOB Or EXW, according to our future buyer client's requirements, our price result of applying the LME minus, A very interesting percentage for the buyer. Our payment method is through DL / C, irrevocable, non-transferable, non-divisible, payable on demand against documents 95% at origin and 5% at the Port of final destination, If CIF Situation. If It Is FOB Or EXW, the payment will be 100% at Source. PARAMETER (S) Cu >40%, REJ. Cu

Commodity: Copper Ore Concentrated, From: Cu >20% To Cu >35%, Rej. Cu 20.00% - TO Cu >35.00% Rej. 2 Pb

IRON ORE IN BIG VOLUMES, NIGERIA: 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838 Metric Tonnes - Iron Content: 60.8%�  -� S.G:� 5.0

"Place of Origin Orissa, India Brand Name Iron Ore Model Number Ore Type MAGNETITE Chemical Composition Fe-57.45 Moisture Lever 8.45 % Size Below 10 MM Shape Mine Concentrate Or Not Is Concentrate Moisture (%) 8.45% Fe (Min) 57.25"

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.

Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.

Ilmenite is the primary ore of titanium, a metal needed to make a variety of high-performance alloys. Most of the ilmenite mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Ilmenite Sand. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Ilmenite sand per month to any destination.

Hematite is an iron ore that contains iron in the form of Fe 2 O 3. It is a significant source of iron extraction. Hematite is a mineral that is paramagnetic. As a result, it can be drawn to an external magnetic field. It is an iron oxide with a chemical composition of Fe 2 O 3. It is a common rock-forming mineral found in sedimentary, metamorphic, and igneous rocks at locations throughout the world. Hematite is the most important ore of iron. Hematite is a heavy and usually hard oxide mineral that constitutes the most important iron ore123. It has a chemical formula Fe2O3, indicating that it consists of two iron (Fe) atoms bonded to three oxygen (O) atoms4. Hematite has a high iron content and is one of the most abundant iron ores found on Earth43. It is often found in sedimentary, metamorphic, and igneous rocks4. Hematite is mined in some of the largest mines in the world3. Hematite ore has naturally high iron content suitable for steelmaking5. Features Of Iron Ore: Iron ore is the main raw material that is used in the manufacturing of steel. 97% of the mined iron ore goes in the steel production. Nigeria has rich deposits of Iron Ore and is among the top 8 exporter of iron ore in the world. Please find below our IRON ORE SPECIFICATIONS 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534.835 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844.835 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838.14 Metric Tonnes - Iron Content: 60.8% - S.G: 5.0 Metal analysis of 6.885 Iron Ore QUALITY TEST: Analysis was done using AAS & XRF-ANALYZER and the ELEMENTAL Compositions of the sample(s) are reported below: CERTIFICATE OF ANALYSIS SAMPLE ID IRON ORE SPECIFIC GRAVITY (SG) PARAMETERS Weight % 5.00 TiO2 0.746 Fe2O3 60.885 As2O4

Bauxite is a naturally occurring, heterogeneous material composed primarily of one or more aluminum hydroxide minerals, plus various mixtures of silica, iron oxide, titania, aluminosilicate, and other impurities in minor or trace amounts. Bauxites are typically classified according to their intended commercial application:� � abrasive, cement, chemical, metallurgical, refractory, etc. The bulk of world bauxite production (approximately 85%) is used as feed for the manufacture of alumina via a wet chemical caustic leach method commonly known as the Bayer process. MOQ 5,000MT Supplied from Africa or India

There are limits to where and how much metals and ores can be mined. We deliver metals and ores that meet SGS standards not only from South Africa and Vietnam

We have Mines Source from Laos with total reserve about 10.000.000 MT of Iron Ore. Purify reach to 62 - 65% and over. Capacity: 50.000 MT per Month Shipping Terms: Exw or FOB Da Nang port, Vietnam. Payment: LC at sight or TT against Documents

We have Mines Source from Laos with total reserve about 2.000.000 MT of Lead Ore. Purify reach to 79% and over. Capacity: 10.000 MT per Month Shipping Terms: Exw or FOB Nghi Son port, Vietnam. Payment: LC at sight or TT against Documents

Lithium Ores is directly collected from mines ( Afghanistan, Africa and Ethiopia)