Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130-160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh:Â 120 - 190/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: Â 120 190/inch Tension:Â 25 - 35 N/cm Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 -190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:  60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege 60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Water based adhesives, hot melt adhesives, aqueous coatings, uv varnishes, paper & boards and printing press chemicals, wet lamination, dry lamination, side/flap pasting, window patching, hot melt book binding adhesives, wood glue, mattress adhesives, construction adhesives, cold binding adhesive, window patching adhesive, cold glue for honeycomb sheet, side/flap pasting adhesive, dry lamination adhesive, solvent less pu adhesive general to medium performance grade, solvent less pu adhesive for high performance grade, solvent base general grade, solvent base gmedium grade , wet lamination adhesive(top grade), aqueous or water base coating for offset press, water base pressure sensitive adhesive, water base for label stock, hvac insulation adhesive, jelly or animal glue, book bidning adhesives,pet botlle labelling adhesive, carton sealing & closing adhesive, hot melt adhesive for paper bag handle, solvent base medium grade, solvent less pu adhesive.
Product Name: Bopp Tape Place of origin: Viet Nam Usage: Packing Cartons Color: Transparent/ red/ blue/ green/ yellow/ printed Backing material: BOPP film Adhesive Type: acrylic Color: clear, beige, cream white, tan, red, yellow, blue, green, black or customized printing etc. Thickness: 36-63 �¼m Width: 24mm, 36mm, 41mm, 42.5mm, 48mm, 50mm, 51mm, 52.5mm, 55mm, 57mm, 60mm etc. Thickness of paper core: 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 9.3mm or customized thickness Management Certification: ISO9001:2008/SGSS BOPP carton sealing tape is packed with stretch film and corrugated carton, 6 rolls/shrink, 72 rolls /carton or as customers' need.
GSM Ranging from 12 to 150 Colors Available : According to customers choice standard width : 3.2 meter. 1.6 meter 80 cms 3 meter, 1.5 meter specially treated Fabric: Hydrophilic Fire Retardent UV Treated use only premium grade polypropylne (sabic imported) for manufacture minimum quantity for any export order is one 40 FT container around 11.5 tons. 1) white fabric 50 to 150 gsm . 2300 US ton FOB 2) any other color fabric for 50 to 150 gsm ; 2340 US per ton FOB 3) For GSM 12 to 20 any color 2450 USD / tonn fob Extra chargesfor specially treated fabric Minimum Order Quantity; 1x40' container preference for High GSM Fabric 40 to 120 GSM consider width of Machine. 3200 mm Application: Medical : Face Mask ,Shoe covers, Bed lines and Curtains in hospitals, Surgical Drapes, Wraps, and Medical Gowns, Hygine: Dipers Industry. Baby and Adult Face wipes, Sanitary Napkins and other feminine products due to their inert Nature Furniture Upholstery. It is used in Furniture industry, underlining sofa, pillows, and Mattress ticking , curtains and many more items Mattress Construction: It is Extensively in Construction of Mattresses Agriculture , Horticulture & Landscaping : Used in crop Protection, has specialized UV absorbers / Stabilizers incorporated in it ensures protection from Sunrays Packaging; It is used in Making Products like shopping bags, Tea Bags, rice Bags, Flower Wrapping and Protective Packaging Luggage & Shoe Lining : used in Products like bags, Shoes, Bandbags, Wallets, Purses, and More Speciality Fabrics. : used in Resistence Fabric, Antistatic Fabric used in fire Retardent fabrics, antistatic fabric, antibacterial and hydrophilic Treatments Other Application like CD cover, & Disposal, underwear, laundry sheets, and value added products like Fabric Flexo Printing Fabric , slitting and Lamination
