Polyethylene is the world's most widely used thermoplastic and is made by the polymerization of ethylene. Polyethylene is often classified by its density, because greater density corresponds with greater material rigidity. The world�¢??s largest volume polyethylene is high density polyethylene (HDPE), which has a relatively high degree of tensile strength. Plastic containers represent the most common household use of high-density polyethylene. At the opposite end of the spectrum is low density polyethylene (LDPE), which was the first type of polyethylene to be developed. Flexible packaging represents the most common household use of low-density polyethylene. Both high- density polyethylene and low-density polyethylene are also commonly used for moulding applications. Linear low-density polyethylene (LLDPE) can usually be manufactured at a slightly lower cost than low density polyethylene and has similar basic properties. While low-density polyethylene and linear low-density polyethylene are to a certain extent substitutable for each other, one may be more suitable than the other for a specific application.
Black LDPE granules is produced from European origin post industrial 60/40 and 80/20 grade raw materials. Standard process includes crushing, washing in three separate pools, agglomerating and extruding in two stages. MFI Range (190 -C 2,16 kg ) 0,80-1,00 g/10 min at 190 C 2,16 kg Density 0,91-0,93 g/cm3.
High density polyethylene HDPE for non-toxic, tasteless, no smelly white particles, melting point is about 130 C, relative density of 0.941 - 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, and environmental stress cracking resistance.
Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles
This product is one of the core offerings from CopperChem Industries, serving as a vital component for various industries. We have the privilege of supplying this product to renowned clients such as Global Oil Corporation, Petrochem Solutions, EnergyTech Services, ChemCo Enterprises, Advanced Catalysts Inc., AquaPure Technologies, EnviroChem Solutions, TechBuild Chemicals, and Innovate AgroScience. Our copper sulfate pentahydrate is in high demand across industries including Oil & Gas, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, and Food. We provide flexible packaging options, ranging from IBCs, Drums, and ISO Tanks to Bags and Bulk Vessels." Price of product (USD or FOB price): USD Product Origin: Multiple Key Specifications/Special Features: This product holds a significant position in CopperChem's product portfolio, and it is supplied to our esteemed clients worldwide. To obtain detailed technical information such as the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and Certificate of Analysis (COA), please reach out to our experienced sales team or visit our website.
Product Description: Our Sodium Ash Light is a high-quality chemical compound consisting of sodium carbonate (Na2CO3), sodium hydroxide (NaOH), and sodium bicarbonate (NaHCO3). Stored under controlled temperatures, it is a reliable and stable product. Use Case Scenarios Industrially: Glass Manufacturing: Sodium Ash Light acts as a flux, aiding in impurity removal and lowering the melting point of silica. Detergent Production: It serves as a pH regulator and water softener, enhancing detergent efficiency. Chemical Synthesis: Sodium Ash Light is a vital reagent in various chemical synthesis processes. Metallurgical Applications: It helps remove impurities and control pH levels in metal refining and smelting. pH Control and Water Treatment: Sodium Ash Light adjusts pH levels and softens hard water. Contact us for competitive pricing and prompt delivery of our Sodium Ash Light. Trust us as your reliable supplier for all your chemical needs.
Description: Sodium Hydrosulfide 70% for Industrial Use Our Sodium Hydrosulfide 70% solution is a high-quality industrial chemical essential for various applications. It contains 70% Sodium Hydrosulfide (NaHS) by weight, ensuring superior performance. Stored at temperatures below 25�°C (77�°F), our clear, colorless solution is ideal for industrial use. Applications: Mining and Mineral Processing: Ore flotation and metal recovery. Textile Industry: Desulfurizing agent for viscose rayon fibers. Paper and Pulp Manufacturing: Enhances paper quality. Water Treatment: Removes heavy metals from wastewater. Chemical Synthesis: Reducing agent in chemical reactions. Leather Industry: Used for dehairing and deliming processes. We provide top-quality Sodium Hydrosulfide 70% solution, manufactured with care. Contact us for more information and to meet your industrial needs.
Maks Antibacterial flat 3-Layers disposable nowoven protective face masks with Earloop 3-LAYER STRUCTURE PROTECTIVE MASK: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch. Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen. Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being. 3-LAYER STRUCTURE PROTECTIVE MASK: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch. Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen. Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being.
-SCHICK Exacta 2 sen 2+1 [3 pcs x 12 pack x 12 =432pcs] -SCHICK Exacta 2 women 2+1 Pink [3 pcs x 12 pack x 12 = 432pcs] -SCHICK Exacta 2 sen 5+2 [7 pcs x 12 x 1 = 84pcs] -SCHICK Xtreme 3 Men Disposable 2+1 [3 pcs x 6 bags x 10 = 180pcs] -SCHICK Xtreme 3 comf + Wom 4''s HT [4 pcs x 6 pack x 12 = 288pcs]
Food: basmati rice, black eye beans, chickens feet, copper cathode, chicken, pork, beef , sunflower oil, noodles , sugar wheat, soybeans wheat, sugar, nitrile gloves, vinyl gloves, latex gloves, ffp2 mask 3 ply mask, face masks.
The high quality bulgarian rose oil gained its producers scores of medals and diplomas from many exhibitions and fairs. The rose valley in bulgaria, near the town of kazanlak, is among the major producers of attar of roses in the world. Thanks to the specific geographic and climate conditions favorable temperatures during february, when blossoming buds formed, the maroon forest soils and frequency of the rainfalls during the rose picking in may and june, more than 3 centuries had been cultivated the famous all over the world bulgarian oil rose. This rose is used for producing the incomparable bulgarian rose attar.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. If your Buyers is still looking for Sugar, my company works directly with 2 different Sugar Supplier located in the USA & the UK that has sugar available OTG in Miami & New Jersey. The Seller will do a Zoom call with Buyer or Buyer Mandate & will also exchange KYC. Please be aware sugar prices continue to increase. The Seller Mandate can arrange a Zoom call with the Seller and Buyer to discuss the details of your requirements, logistics & payment method. The Seller will not waste time with going back and forth with long chains that haggle over commission, he will walk away from a deal. 50,000 ($910) in New Jersey + 100,000 ($770) in Miami (TBC) Procedure 1. ICPO + KYC 2. CI 3. INSPECTION 4. PAY The Seller also has 300K in Miami but 2 potential buyers who have been vetted, provided their ICPO & POF will be visiting the warehouse tomorrow for inspection so it could be all gone the Price is $710. If for some reason the deal falls through you must provide the ICPO AND POF, your buyer could also visit the warehouse. It will not last long.
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. I am currently working with a Fuel Supplier located in the USA, if your Buyer is looking for EN590 or A1Jet Fuel see SOP & pricing below. After reviewing the SOP and you are agreeable with the price please email or post to WhatsApp your LOI and I will open a group with my Seller Mandate. My SM will arrange a Zoom call with the Seller to discuss your requirements. TRANSACTION PROCEDURES FOB TANK TO TANK 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice alongside buyer tank storage agreement (TSA) for verification. 3. Seller provide buyer with the below listed PPOP. Product Passport (product analysis report) Irrevocable Commitment Letter to Supplier Tank Storage Receipt (TSR) Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm. 4. Seller provides buyer with SGS report, Injection Report, unconditional DTA. 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank-to-Tank injection and provide the buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. 8. TARGET PRICE: EN590 / $650MT
So Klin Floor Cleaner 900ml: Product Description : So Klin Floor Cleaner 900ml. Variant : 1. Floral Lavender 2. Ice Pine 3. Marine Mine 4. Citrus Lemon 5. Rose Bouquet. Packaging Details : 900ml x 6 Product Origin : Indonesia Key Specifications/Special Features : Household chemical, floor cleaner, freshener Minimum Order : 1x20'F
So Klin Floor Cleaner 450m: Product Description: So Klin Floor Cleaner 450ml. Variant : 1. Floral Lavender 2. Ice Pine 3. Marine Mine 4. Citrus Lemon 5. Rose Bouquet Packaging Details : 450ml x 12 Product Origin : Indonesia Key Specifications/Special Features : Household chemical, floor cleaner, freshener Minimum Order : 1x20'F