Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Quartz silica sand offered by our company is considered the most abundant element available on earthâ??s surface. This is consumed in large number of industries in different forms. Our company has various types of Quartz silica sand at pocket friendly prices. Customers can avail it from us in bulk quantity. Quality is Quartz: Snow white,Super and White Sizes:0.1 to 2.5 mm & 100 mesh to 400 mesh Available. Sizes and quality can be arranged as per customers requirement.
We are offering a competitive range of Industrial Salt to our valued clients. This industrial salt is used for various industries purposes. These products are developed using safe and hygienic raw material, under the supervision of our industry experts.
We are a dedicated manufacturer and suppliers of the Coarse Salt. Obtained from reliable vendors, the raw material goes thorough an extensive refinement, centrifuging and during process. Also our quality team is diligent in the verification of the chemical characteristics of the salt for easy solubility and effective usage. We provide cost effective bulk delivery to clients wit flexible.
It is a cost effective product for melting of snow and ice on roadways, highways, parking lots and bridges; rock salt is a reliable recommendation for winter road deicing.
Industrial salt is used in the oil industry for drilling rig, pharmaceutical industry in making capsules, in textile, metal, FMCG, paper and leather industries.
Shanghai Shineline Abrasives Co.,ltd offer high quality brown fused alumina, white fused alumina powder and grit for abrasives, blasting media, refractories. FEPA grade, JIS grade , special size orders are all accepted. All orders will be delivered in time.
Bond Abrasive White Aluminium Oxide Fused Alumina 99% WFA F24 F30 F36 Description: white fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency. White fused aluminum oxide becomes the first choice for the sandblasting technics, meanwhile, it is also the ideal material for sandblasting and workpiece cleaning, and polishing. Specification: property of aluminum oxide/white aluminum oxide: Purpose Specification Chemical composition(%) Magnetic material content(%) Al2O3 Na2O SiO2 CaO For abrasive F 12#80# 99.2Min 0.4Max 0.4 Max 0.003 Max 90#150# 99.0Min 0.4 Max 0.003 Max 180#240# 99.0Min 0.4 Max 0.4 Max 0.002 Max Particle size : F8, F10, F12, F14, F16, F20, F22, F24, F30, F36, F40, F46, F54,F60, F70, F80, F90, F100, F120, F150, F180, F220
This kind of white fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina.It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency, acid and alkali resistance, good thermal stability. As the abrasive materials, it is suitable for grinding high-speed, high carbon steel, as loose grains, it widely used for bonded and coated abrasives,polishing, precision casting and so on. Package: 1 MT big bag or 25kg paper bag *40 bags on one pallet ;As per customers requirement Particle size : F8, F10, F12, F14, F16, F20, F22, F24, F30, F36, F40, F46, F54,F60, F70, F80, F90, F100, F120, F150, F180, F220 And 0-1mm1-3m,3-5mm5-8mm200mesh-0320mesh-0 We will provided FREE SAMPLE about 1kg. Welcome to ask for free samples.
As a general rule, The purer the sand, the clearer the products Silicon and oxygen are the earth's two most abundant elements and together they make silica, one of the earths three most common rock forming minerals. Akshar Minerals Silica sand is high purity natural crystalline silica. It is inherently bright, white, low in moisture and chemically inert in nature. Basically, It is made up of two main element Silica & Oxygen. Silica sand is made up of Silicon Dioxide. There are number of different uses of silica sand in the industrial and commercial sector, from golf courses to glass making . The chemical formula of Silica Sand is SiO2 Characteristics : High Purity Weather Resistant White Appearance Naturally Hard Controlled Particle size Chemically Inert Applications Akshar Minerals Silica sand is used depends on physical, chemical and mechanical characteristics such as grain size, shape color, structure and distribution as well as refractoriness strength and stability. There characteristics can differ depending on how mineral is processed after it is mined. This product gets easily mixed and can be used for high temperature applications like flat glass, furnace tubes and many more due to its excellent thermal expansion, hardness. It yields improved durability and burnish resistance. We make for all type of application in the industries like Glass industries, Sodium Silicate Industry, Golf course & Sport Ground, Adhesive and sealant, Rubber industry, Texture Wall Paint, Sand Blasting, Agro pesticide, Cosmetic industry, Soap & Detergent, Filtration Media, Power Plant & Petroleum, Construction Chemical Industry, Plastic, Fertilizer, Paint, Ceramic, Insulation, Foundry, Ramming Mass, Steel Industry, Landscaping, GRC & GRP Industry, Oil & Petroleum Industry, Oil Exploration & Oil Drilling.
Garnet sand is made of garnet as raw material. It is a kind of iron-aluminum silicate with moderate hardness, high melting point and stable chemical properties. According to different products and structures, it presents different colors, such as dark red, brown red, pink and black. Widely used in optical industry, electronic industry, machinery industry, oil and gas and other industries.
Garnet Sand , derived from mined Almandite and Andradite mineral deposits, is a semi-precious stone.Once extracted, it is processed and then screened to the desired grade. The combination of the high density and physical properties make Garnet nature's most highly efficient, effective and safe abrasive for both wet and dry blasting applications Pink Color 30-60 Mesh Alluvial Garnet Sand for Sandblasting Main Applications 1 Water filtration media 2 Sand blasting media 3 Water jet-cutting abrasive suggested materials: tile, Marble, granite, stone, stainless steel, steel plate. 4 Precise water jet-cutting, hole drilling, lapping 5 making coated or bonded abrasive tools
20 years abrasives white alumina for Surfact treatment Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3
White fused alumina for coated abrasives White fused alumina for coated abrasives,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The White fused alumina for coated abrasives produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3
Details: 1.Place of original: HENAN 2.Material:AI2O3 3.Real Density: 3.95g/m3 4.Bulk density: 1.75-1.95 g/m3 5.Melting point: 2250 6.Refractoriness:1900 7.Mohs hardness: 9.0 8.Usage: abrasive/blasting/polishing/refractory 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sampla: free 12.MOQ: 25ton 13.Color: white. Supply Ability 3500 Ton/Tons per Month. Application: 1. Used for free grinding, such as glass industry. 2. Used for friction products and wear-resistant floors. 3. Suitable for resin or ceramic bond abrasive, such as grinding wheel, cutting off grinding wheel, etc. 4. Suitable for refractory, wear-resisting and refractory products. 5. Used for polishing, such as grindstone, grinding block, plate turning, etc. 6. Used for coating abrasive tools, such as sandpaper, emery cloth, sand belt, etc. 7. Used for precision casting, grinding, grinding, polishing mold production.
White fused alumian/corundum is an artificial corundum abrasive, the main component of aluminum oxide (Al2O3), and contains a small amount of iron oxide, silicon oxide, etc., the color was white. White corundum high quality alumina powder as raw material, refined crystalline and fused into, there are dense texture, high hardness, high temperature, acid corrosion, thermal stability properties. particles cusp form for use in the manufacture of ceramics, resin bonded abrasives and grinding, polishing, blasting, precision casting, can also be used to manufacture advanced refractory. Application 1.Spraying and grinding. 2.High-end products, crafts or hardware products surface beautification processing. 3.Precision casting, silicon crystal cutting, advanced refractories and ceramic additives. 4.Bonded abrasives and coated abrasives. 5.Processing harder and stronger tensile strength materials such as quenching steel, alloy steel, high speed steel and high carbon steel. 6.Ultra-precision Grinding and Polishing in Crystal and Electronics Industry, Precise Surface Treatment of Metal and Optical Products 7.Contact media, insulators and precision casting sand Size Sectional sand 0-1mm 1-3mm 3-5mm 5-8mm Fines 100#-0 200#-0 320#-0 Grains 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# Micro powder W--- W63 W50 W40 W28 W20 W14 W10 W7 W5 W3.5 W2.5 W1.5 W0.5 GB---240# 280# 320# 400# 500# 600# 800# 1000# 1200# 1500# 2000# 2500# 3000# JIS---#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 FEPA---F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000
Polishing abrasive white carborundum powder White carborundum powder was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Physical Index color white Mohs Hardness 9.0 Melting point 2250 Maximum service temperature 1900 Bulk density 1.75-1.95g/cm3 Real density 1.75-1.95g/cm3 Chemical analysis Al2O3(min) 99.6% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4%
Model: White fused alumina F46 Chemical compositions Al2O3: 99.53%min SiO2: 0.04%max Na2O: 0.26%max Fe2O3: 0.04%max Physical properties Color: White Bulk density: 1.75-1.95g/cm3 Grain density: 3.90g/cm3min Morse hardness: 9 Content of magnetic substance: 0.0023%max. 25kg PVC bags + 1MT big bag.
White fused alumina is made of high quality alumina oxide powder as raw material, refined and crystallized by electric melting. It has high purity, good self-sharpening, high temperature resistance and stable thermal performance. PRODUCE PROCESSING 1ã??electric melting 2ã??Cooling 3ã??Broken 4ã??Screening size AL2O3 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# â?¥99.5% 0-1mm 1-3mm 3-5mm 5-8mm â?¥99.5% 100#-0 200#-0 320#-0 â?¥99% FEPA:F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 JIS:#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 â?¥99.2%
