1x32 MEMS switch is a very fast opto-mechanical switch working over both telecom wavelength windows from 1240 nm to 1640 nm. The highly reliable switching mechanism is based on micromechanical mirrors and features below 1 ms switching time and only 1.5 dB insertion loss. The miniature package withstands rugged environments and is well suited for direct mounting on printed circuit boards. 1x32 MEMS optical switch FEATURES ï?·ï? reliable ï?·ï? 1.5 dB insertion loss ï?·ï? 1 ms response time ï?·ï? 60 dB crosstalk ï?·ï? non-latching 1x32 MEMS optical switch APPLICATIONS ï?·ï? Source Selection ï?·ï? Protection Switching ï?·ï? Monitoring ï?·ï? Wavelength provisioning 1x32 MEMS optical switch DESCRIPTION The non-latching 1x32 switch modules are fast and reliable switches designed for single mode fiber instrumentation and communication equipment. The device is based on the latest silicon MEMS technology and uses micro-mechanical mirrors to redirect the light. The absence of fatigue and wear-out allows to achieve a constant switching quality even after billions of actuation cycles. The switch features fast switching below 1 ms and high crosstalk attenuation above 60 dB. Repeatability is better than 0.01 dB. The switch is powered by a 5 V supply voltage. A 5 V TTL or CMOS drive signal is used to control the switching state. 1x32 MEMS optical switch TECHNICAL SPECIFICATIONS UnitMinTypMax Wavelength Rangenm12401640 Insertion LossdB1.52.5 CrosstalkdB6050 Back reflectiondB5545 Polarization Dependent LossdB0.25 Switching Timems0.51 Switching VoltageV5 Fiber Pigtailmm9/125 or 50/125 or 62.5/125 Durabilitycyclesno wear out Power ConsumptionmW1050 Operation Temperature°C070 Storage Temperature°C-4085
The MEMS Latch Series 2x2 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost. 2x2 MEMS optical switch Features â?¢High Reliability â?¢Latching â?¢Intrinsic tolerance to ESD 2x2 MEMS optical switch Applications â?¢ Channel Blocking â?¢ System Monitoring â?¢ Instrumentation â??2x2 MEMS optical switch Performance ParametersMSW-2Ã?2 Wavelength Rangenm1260ï½?1620 Testing Wavelengthnm1310/1490/1550/1625/1650 Insertion LossdBTyp:0.8 ,Max:1.2 Return LossdBâ?¥50 CrosstalkdBâ?¥50 PDLdBâ?¤0.10 WDLdBâ?¤0.25 TDLdBâ?¤0.20 RepeatabilitydBâ?¤Â±0.05 Repeatability RateHz20 LifetimeCycleâ?¥109 Switch Timemsâ?¤5 Transmission PowermWâ?¤500 Operation Temperatureâ??-5ï½?+70 Storage Temperatureâ??-40ï½?+85 Switching typeLatching
The MEMS Latch Series 4x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost. 4X4 MEMS optical switch Features â?¢High Reliability â?¢Latching â?¢Intrinsic tolerance to ESD 4X4 MEMS optical switch Applications â?¢Channel Blocking â?¢Configurable Add/Drop â?¢System Monitoring â?¢Instrumentation â?? 4X4 MEMS optical switch Performance ParametersMSW-4Ã?4 Wavelength Rangenm1260ï½?1620 Testing Wavelengthnm1310/1490/1550/1625/1650 Insertion LossdBTyp:1.2,Max:2.0 Return LossdBâ?¥50 CrosstalkdBâ?¥50 PDLdBâ?¤0.10 WDLdBâ?¤0.25 TDLdBâ?¤0.20 RepeatabilitydBâ?¤Â±0.05 Repeatability RateHz20 LifetimeCycleâ?¥109 Switch Timemsâ?¤5 Transmission PowermWâ?¤300 Operation Temperatureâ??-5ï½?+70 Storage Temperatureâ??-40ï½?+85 Switching typeLatching Dimensionmm(L)38Ã?(W)38Ã?(H)7.5
1x2 Optical Switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching 1x2 Optical Switch Application Optical Signal Switching and Routing Optical Network Protection and Restoration Optical Network Monitoring Video Distribution Instrumentation Resource Sharing Military Communications Parameters OSW-1Ã?2 Wavelength Range nm 650ï½?1310 1260ï½?1670 Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion Loss dB Typ:0.6,Max:1.0 Typ:0.5 ,Max:0.8 Return Loss dB â?¥30 â?¥50 Crosstalk dB â?¥35 â?¥55 PDL dB â?¤0.05 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB â?¤Â±0.02 Power supply v 3.0 or 5.0 Lifetime Cycle â?¥Â 107 Switch Time ms â?¤8 Transmission Power mW â?¤500 Operation Temperature â?? -40ï½?+85 Storage Temperature â?? -40ï½?+85 Weight g 16 Dimension mm (L)27Ã?(W)12.6Ã?(H)8.5(±0.2)
2x2 optical switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching 2x2 optical switch Application ï?·Optical Signal Switching and Routing ï?·Optical Network Protection and Restoration ï?·Optical Network Monitoring ï?·Video Distribution ï?·Instrumentation Resource Sharing ï?·Military Communications Parameters OSW-2x2 Fiber type nm MM SM Testing Wavelength nm 630/650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion Loss dB Typ:1.0,Max:1.3 Typ:1.0 ,Max:1.2 Return Loss dB â?¥30 â?¥50 Crosstalk dB â?¥35 â?¥50 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB â?¤Â±0.02 Power supply v 3.0 or 5.0 Lifetime Cycle â?¥107 Switch Time ms â?¤8 Transmission Power mW â?¤500 Operation Temperature â?? -40ï½?+85 Storage Temperature â?? -40ï½?+85 Weight g 16 Dimension mm (L)28Ã?(W)12.6Ã?(H)8.5(±0.2)
2x2B Optical Switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching 2x2B Optical Switch Application ·Optical Signal Switching and Routing ·Optical Network Protection and Restoration ·Optical Network Monitoring ·Video Distribution ·Instrumentation Resource Sharing ·Military Communications Parameters OSW-2x2B Wavelength Range nm 650ï½?1310 1260ï½?1670 Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion Loss dB Typ:0.6,Max:1.0 Typ:0.5 ,Max:0.8 Return Loss dB â?¥30 â?¥50 Crosstalk dB â?¥35 â?¥50 PDL dB â?¤0.05 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB â?¤Â±0.02 Power supply v 3.3 or 5.0 Lifetime Cycle â?¥107 Switch Time ms â?¤8 Transmission Power mW â?¤500 Operation Temperature â?? -40ï½?+85 Storage Temperature â?? -40ï½?+85 Weight g 16 Dimension mm (L)27Ã?(W)12.6Ã?(H)8.5(±0.2)
D1x2 Optical Switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching D1x2 Optical Switch Application Optical Signal Switching and Routing Optical Network Protection and Restoration Optical Network Monitoring Video Distribution Instrumentation Resource Sharing Military Communications Parameters OSW-D1x2 Wavelength Range nm 650ï½?1310 1260ï½?1670 Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion Loss dB Typ:0.6,Max:1.0 Typ:0.5 ,Max:0.8 Return Loss dB â?¥35 â?¥50 Crosstalk dB â?¥40 â?¥50 PDL dB â?¤0.05 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB â?¤Â±0.02 Power supply v 3.0 or 5.0 Lifetime Cycle â?¥107 Switch Time ms â?¤8 Transmission Power mW â?¤500 Operation Temperature â?? -40ï½?+85 Storage Temperature â?? -40ï½?+85 Weight g 16 Dimension mm (L)27Ã?(W)12.6Ã?(H)8.5(±0.2)
D2X2B optical switch Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching D2X2B optical switch Application ï?·Optical Signal Switching and Routing ï?·Optical Network Protection and Restoration ï?·Optical Network Monitoring ï?·Video Distribution ï?·Instrumentation Resource Sharing ï?·Military Communications Parameters OSW-D2x2B Wavelength Range nm 650ï½?1310 1260ï½?1670 Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion Loss dB Typ:0.6,Max:1.0 Typ:0.5 ,Max:0.8 Return Loss dB â?¥30 â?¥50 Crosstalk dB â?¥35 â?¥50 PDL dB â?¤0.05 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB â?¤Â±0.02 Power supply v 3.0 or 5.0 Lifetime Cycle â?¥107 Switch Time ms â?¤8 Transmission Power mW â?¤500 Operation Temperature â?? -40ï½?+85 Storage Temperature â?? -40ï½?+85 Weight g 16 Dimension mm (L)27Ã?(W)12.5Ã?(H)8.2(±0.2)
A water-cooled acousto-optic Q-Switch for use in high-power Nd:YAG laser systems. Combining top grade fused silica with high quality optical finishing and in-house anti-reflection coatings, this Q-Switch exhibits very low insertion loss and high damage threshold. Through an innovative design and manufacturing process, RF powers up to 100W may be applied. Standard options include a choice of frequencies (24 to 68MHz), active apertures (1 to 8mm), acoustic modes (compressional for linear polarisation, shear for unpolarised) and water connectors. Customised housings are available for OEMÆs.
Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass.
XH-FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path manually, proximity and remote via keypad, serial communication and Ethernet communication. The FSW-1X200 rackmount optical switch is a kind of optical path control equipment, which can control optical path switching manually, near-range and remotely through keypad, serial communication and Ethernet communication. It plays an important role in optical communication applications. Optical switches are mainly Optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multiple light sources / detectors automatic switching and optical sensing multi-point dynamic monitoring The optical switch is used in optical fiber, optical device, network and field engineering optical cable testing; optical device installation and adjustment. Features (1) With small insertion loss and fast switching speed, etc. (2) The internal circuit of the optical switch is self-detecting, and the fault alarm informs. (3) The serial port adopts FT-232 industrial-grade USB to RS-232 chip. (4) LCD display is adopted to display the status of the optical circuit very intuitively, which is convenient for the userâ??s operation. (5) Can send commands through the key and serial port, network port to control the light path switching settings. And the key operation can be locked through the serial command. Performance Parameter Parameter Values Model XH-FSW-1XN-U Wavelength Range 1260~1650nm Insertion Loss 1.2 dB Repeatability 0.02 dB Return Loss 50 dB Crosstalk 70 dB WDL 0.25 dB PDL 0.05 dB Fiber Type SM(9/125um) connector FC\PC Monitoring port RJ45,RS-232 Operating power AC:100~240V Operating Temperature -10 ~ +60C Operating Temperature -40 C ~ +85 C Dimension 19 1U(483 X 230 X180)
XH-28-D1X2 OPTICAL SWITCH EQUIPMENT Features It has the characteristics of low insertion loss and fast switching speed. It can be controlled by RJ45 Ethernet or RS-232 serial port command. 28 independent control optical switch buttons, easy to operate. Two different colors of LED display lights, showing the status of the light path. Equipment power supply supports AC: 85~265V AC power supply. Performance Name Parameter Model XH-28-D1X2-U Working wavelength 850/1310nm Test wavelength 850nm Insertion loss 1.5 dB Repeatability ±0.02 dB Return loss 35 dB Crosstalk 50 dB Wavelength dependent loss 0.25 dB Polarization dependent loss 0.05 dB Switching time 10 ms Adjacent channel Fiber type MM 50/125um) Connector form LC\PC customizable Monitoring port RJ45 RS-232 Working power AC 85~265V Operating temperature -5 ~ +55 Storage temperature -40 ~ +85 Chassis size 270mm X 190mm X 135mm
XH-OSW-2X2F optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize the two-way direct and cross function of the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test systems for optical fibers, optical devices, networks and field engineering optical cables Test; optical device installation and adjustment. Features Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Simple control, small size, easy to embed in the circuit board Locking and non-locking control types can be selected Performance Parameter Parameter Value Model XH-OSW-2X2F Insertion loss dB Typh 0.5 Max 1.0 Wavelength Range nm 800~1310 & 1260~1650 Working Wavelength nm 850/980/1310 & 1310/1550/1625 Return Loss dB MM 30 & SM 50 Channel Crosstalk dB MM 35 & SM 55 PDL dB â?¤0.05 WDL dB â?¤0.25 TDL dB â?¤0.25 Repeatability dB ±0.02 Lifetime Times 107 Switching Time ms 8 Transmission Power mW 500 Operating Voltage V 3 or 5 Operating Temperature -20~+70 Storage Temperature -40~+85 Dimension mm (L)27.0 (W)12.5 (H)8.4 ±0.2
XH-OSW-1 128 mechanical optical switch is a kind of light path control equipment. It can realize multi-channel fiber optic light path switching. In the optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and related component test, outdoor cable test and multi-spot optical sensors monitoring system. Feratures Low Loss and High Reliability Parallel Interface (TTL) Modularized Design Epoxy-free on Optical Path Drive Circuit Breakdown Self-checking Function Applications Ring Network Remote Monitoring in Optical Network Testing of Fiber Optical Component
XH-OSW-1xN optical switch is an optical path control device, which has the role of controlling the optical path and converting the optical path. It has an important role in optical communication applications. The optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multi-source/detector automatic switching and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment. Features Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Proprietary technology, no glue in the optical path Locking and non-locking control types are available
XH-OSW-1X4 optical switch is an optical path control device, which has the role of controlling the optical path and converting the optical path. It has an important role in optical communication applications. The optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multi-source/detector automatic switching and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment. Features â?? Low insertion loss, wide wavelength range â?? Low channel crosstalk, high stability, high reliability â??Proprietary technology, no glue in the optical path â??Locking and non-locking control types are available Performance Parameter Parameter Values Model XH-OSW-1X4 Insertion Loss 1
XH-OSW-1X32 optical switch is an optical path control device, which has the function of controlling the optical path and converting the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems in optical testing systems for optical fibers, optical devices, networks and field engineering. Optical cable testing ; Optical device adjustment. Features: Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Unique technology, no glue in the optical path Selectable locking and non-locking control types Parameter Parameter parameter values model XH-OSW-1X32 Insertion Loss 16
Description XH-OSW-1X4 optical switch is an optical path control device, which has the role of controlling the optical path and converting the optical path. It has an important role in optical communication applica-tions. The optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN multi-source/detector automatic switching and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment Featuresâ?? Low insertion loss, wide wavelength range â?? Low channel crosstalk, high stability, high reliability â??Proprietary technology, no glue in the optical path â??Locking and non-locking control types are available
Description XH-DSW-1X2 optical switch module is an optical path control device, has the role of controlling the optical path and converting the optical path; it can realize 2-channel optical signal input, select the signal output of one of the channels (support bi-directional use), the module supports key manual switching and RS-232 serial port command control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment.
12 optical switch Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching
