We are the profesional manufacturer for PE,PET,PP,PS,PLA,EVA and other plastic sheet and plate located in China mainland. our customers come from all over the world. there are a great number types of my extrusion machine such as single layer, three-layer, multi-layer co-extrusion machine, single screw, twin screw extrusion machine . based on your requirements , we could offer you a satisfied solution about your future demands.
Single Screw for Extrusion Machine Hardness after hardening and tempering HB240 â?? 280 Nitride hardness HV850 â?? 1000 Screw Diameter Φ20mm-Ï?250mm Nitride Brittleness less than grade 2 Hardness of nitration HV900-1060 (HRc56°-65°) Screw straightness 0.015mm/m
PVC pipe extrusion machine is suitable for PVC pipe making. Bigger size pipe machinery also available. PVC pipe is a kind of general purpose pipes to points: drains pipe,Website:http://www.jeeplasmachine.com, conduit, cable sheathing, because raw recipe is different, indicators of every type pipes compression are not the same.Main raw material of producing PVC pipe is PVC resin powder. The whole production process include raw materials mixing, extrusion, mould and calibration, haul-off, pipe cutting, and stacker.And plastic crusher and miller are also required if you need recycle waste pipes and itâ??s a good way to reduce materials cost.No.ItemParameter1MIXER UNIT200/5002EXTRUDERSJZ51/1053MAIN MOTOR OF EXTRUDER18.5KW, SIEMENS4CAPACITY OF EXTRUDER180-200KG/H5PVC PIPE MOULD20-110MM6VACUUM CALIBRATION TANK4.5M
PVC duct extrusion machine is suitable for PVC duct making. Bigger size pipe machinery also available. PVC duct is a kind of general purpose pipes to points: drains,Website:http://www.jeeplasmachine.com, pipe, conduit, cable sheathing, because raw recipe is different, indicators of every type pipes compression are not the same.Main raw material of producing PVC duct is PVC resin powder. The whole production process include raw materials mixing, extrusion, mould and calibration, haul-off, pipe cutting, and stacker.And plastic crusher and miller are also required if you need recycle waste pipes and itâ??s a good way to reduce materials cost.No.ItemParameter1MIXER UNIT200/5002EXTRUDERSJZ51/1053MAIN MOTOR OF EXTRUDER18.5KW, SIEMENS4CAPACITY OF EXTRUDER180-200KG/H5PVC PIPE MOULD20-110MM6VACUUM CALIBRATION TANK4.5M
Pvc profile extrusion machine Pvc profile extrusion machine can produce all kinds of profile, for example, window, door and door frame, pallet, cladding of outdoor wall, faciliry of ourside park, floor etc. Output profile is wood plastic composite(wpc) or plastic upvc. Wpc introduction: As a new material to replace wood, wood plastic composite is widely used in fields of building decoration and outdoor building materials, such as edge and corner lines, fence of flowers nursery, skirting board, ceiling line, blind window, stair railing, decorative wall board, outdoor pavilion and so on. Most interior and exterior decorative building materials can be made by using wood plastic composite. Particularly, wood plastic composite can be used in kitchen and washing room for its waterproof and fireproof functions which the raw wood does not have. At present, wood plastic composite has already drawn extensive attention in the world and is praised as new material which will have boa rd developing prospect. Materials: Pvc/pp/pe + wood powder or pvc, pe, pp. Main technical par ameters: Typesy model 120 small profilesy model 240 small profilesy model 240 small profilesy model 240 small profile Valid mold length of setting table /mm30004000400/50006000/8000 Max drawing force20304040 Crawler width/mm200240240240 Valid length of crawler /mm1600180022502400 Water consumption/ m3h-12.5456 Gas consumption /m3h-18101215 Total power/kw24.3272734.7 Appearance dimension Mmmmmm15100860140013500104517601638514652127 17135146521271875014652130 1941014652130 -
1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar.
Specification: a. Material: stainless steel woven mesh, black wire mesh b. Wire Diameter: 0.025mm-3.4mm c. Aperture: 0.026mm-23.4mm d. Diameter: 5-3000mm e. Filtration Rating: 2-200µm f. Edge Processing Mode: raw edge,covered edge Filter disc is mainly used in the technological process with distillation,absorption,evaporation,filtration for rubber,plastics industry,grain and oils screening,petroleum,oil refining,chemical industry,metallurgy,ships,cars and tractors. Extrusion blow moulding machines is one of them.
The Mini Mobile Fertilizer batching & blending machine, it suit to install in the farm supermarket and agricultural material shops as well as small farm etc. Combine automatic batching& blending& filling system in integration. Combine special formula software with internal weighing system together. With function of networking remote monitoring and touch screening control system. Kinds of materials: 3~6 Capacity(tons/hour): 2~5 Accuray:? Range of metering: 20~50kg Power supply: 220V/380V Air supply: 0.55-0.65MPa Working temperature:-30?-+45? Working humidity:
wh 1. Application in the field of air purification: it is used for air purifier, as a sub-high-efficiency and high-efficiency air filter element, and as a coarse and medium-efficiency air filter with large flow rate. It has the advantages of small resistance, large strength, excellent acid and alkali resistance, corrosion resistance, stable efficiency, long service life and low price. There is no short fleece phenomenon in the purified gas. 2. Application in the field of medical and health care: made of melt-blown cloth dust mouth breathing resistance is small, not short, dust control efficiency is as high as 99%, widely used in hospitals, food processing, mining and other workplace to dust, prevent bacteria with anti-inflammatory analgesic membrane made of product after special treatment, permeability is good, non-toxic side effects, easy to use, and spun-bonded fabric of SMS composite products are widely used in the production of sanitary products such as surgical clothes. 3. Liquid filtration materials and battery diaphragm: polypropylene melt-blown filter cloth used in acidic and alkaline liquid, oil, oil has very excellent performance, such as the battery industry at home and abroad has been regarded as a good membrane material, and has been widely used, not only reduces the cost of battery, simplifies the process, and greatly reduce the weight and volume of the battery. 4. Oil absorbent materials and industrial wipes: polypropylene melt spraying cloth made of various oil absorbent materials, oil absorption up to the weight of 14-15 times, widely used in environmental engineering, oil-water separation engineering, in addition, in industrial production, can be used as oil and dust clean materials. These applications give full play to the characteristics of polypropylene and the adsorbability of the ultrafine fiber produced by melting and spraying. 5. Thermal materials: the average diameter of fusion-sprayed ultrafine fiber is between 0.5 ~ 5m, the specific surface area is large, and a large number of fine pores are formed in the cloth with high porosity. There is a large amount of air stored in this structure, which can effectively prevent heat loss and has excellent thermal insulation. It is widely used in the production of clothing and various thermal insulation materials. Such as leather jacket, ski shirt, cold clothing, cotton village cloth, with light, warm, moisture absorption, good permeability, no mildew and other advantages.
1. Expanded snack processing line Expanded snack processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. It has high stability and automatic performance, which offers the possibility to control the expansion of the extrudate through various means to control the texture of the final product. 2. Expanded snack processing line description: 2.1 Flow chart: raw materials---extrusion---drying---flavoring---cooling---packing 2.2 Expanded snack processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 Various finished products sizes and shapes. 2.2.5 Production factors can be quantified and controlled. 2.2.6 World-class food grade fittings. 2.2.7 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.8 Professional pre-sale, sale and after-sale service. 3. Expanded snack samples introduction Basing on modern extrusion technique, expanded snack is made from cereals powder, vitamins and minerals as raw materials, which is fit for different age grades people. After being inflated and heated, its volume is expanded. It leads to the change of its organization structure. This food is multihole, fluffy and crispy, which is one of the most popular foods in the world.
Max film width(mm):900 1200 1700 2500 Max output(kg/g):60 80 100 120 Screw diameter(mm):45*2 55*2 60*2 80*2 Screw & barrel material:38crmoala Main motor power(kw):11 15 22 45 Film thickness(mm):0.05-0.12 0.05-0.15 0.02-0.18 0.05-0.18
Pe stretch film extrusion machine Features: It is mainly to produce unilateral pe stretch film.Product width is between 450 mm to 500 mm. * v.F.Drive for speed regulation and power saving and to insure easy operation. * unique screw and cylinder with independent heating zones to insure accurate heating and curing. * cast aluminum heating bands to insure trouble free for very long time. * unique longer die is the newest update of the key technology to insure no.1 product quality. At present, it is the best stretch film extrusion equipment in china. Main parameters: screw dia. 55 mm total power 24 kw Screw l/dia 28:1 heating power 15 kw Screw rpm 20-150 driving power 13.2 kw Assist machn pull 0-100 m/mi n assist machn roller l. 650 mm Production 15-40 kg/h install d. (l/w/h) 4, 500x1, 650x3, 200 Standard seaworthy steel pallet packing
Farmer's field film extrusion machine Advantages: 1. Super thin to save cost and match needs of farmers and familiar buyers. 2. Easy operation and easy to adjust: V.F.drive for speed regulation and power saving.It is of digital display. 3. The machine is with slit open devices and 2 or even 4 independent winders (optional). 4. Besides the good cooling technology, the machine frame is big to insure good cooling and top transparency. 5. Rotational die.(Filler's magnet is optional). 6.The winding method is friction winding. If 4 winders, 4 mores are used for winding (optional). 6 . We sell the machine with enough spare parts and a CD ROM to make the buyer trouble free. Main Parameters: Model JDM-55D JDM-65D Screw Diameter 55 mm 65 mm Product Width 300-1000 300í1,500 mm Production 70 kg/h 80 kg/h Main Motor 18.5 kw 18.5 kw Total Power 26 kw 28 kw Install Sizes L/W/H 4,800x3,000 x6,000 4,800x3,000 x6,000 Total Weight 3 tons 3.5 tons Standard seaworthy steel pallet packing
Album PP film extrusion machine Features: This machine employed a configuration of down-blowing,air cooling and water cooling,hot air drying.Both the main motor and pulling motor employed V.F. drive for speed regulatioin. It is specialized for top quality photo album and other stationery top transparence use. Water Chiller, Corona Treater, 2 more extra winders, filler magnet and auto loader are optional. Advantages: 1. A big and high frame to insure very good cooling and better transparency. 2. Screw length to diameter is 1:32. 3. All guiding rollers are of anodized aluminum to insure best dynamic balance and stable and accurate operation. 4. The calander roller is of mirror surface. 5. Pneumatic open-flat pressing rollers have 2 sets: one is for emboss film and the other is for flat film. If you are looking for a normal PP film extrusion machine, please click here. Main Parameters: Model WCMGS-PP-65x900 Screw Dia. 65 mm Screw Length/Diameter 32:1 Screw RPM 20--150 Pull Speed 0--100 m/min Production 40 - 80 kg/h Total Power 28 kw Pull Roller 900 mm Original materials PP/CPP Dimensions (L/W/H) 8100x2300x4200 Standard seaworthy steel pallet packing
L550mm*W210mm*H320mm(extrusion clamp)
Plastic Sheet Extruder: the machine makes different sheets, including PP sheet, PS sheet, ABS sheet, PE sheet, PET sheet finished sheet are used for plastic products like disposable cups, ice-cream cups, plastic bowls, plastic lunch wraps, plastic trays and other plastic products PET sheet extrusion machine PET sheet making line Processing material: PET virgin pellets(APET or PETG) plus flakes; Or 100% flakes Thicknes range: 0.15-1.5mm Net sheet width: 650-1550mm(or as per cusotmer's requirement) Layer structure: Signle layer or multi-layer Capacity: 500-700kg/h Application: Thermoforming(cup, bowel, etc. ), food box, fruit/egg tray, cup, electric tray, stationery, printing sheet, packaging, etc. It used co-extrusion technology produce multi-layer co-extruded PET sheet, such as APET/PETG, PETG/APET/PETG, APET/RPET/APET. It widely used in attracts models packing, printing, elec. Packaging and etc. With precision dispenser, sheet layered evenly, each layer thickness adjustable. The screw to the modular structure, Adapt to the APET production of secondary materials, Also suitable for the PLA production of biodegradable materials. Solve the horizontal corrugated PET sheet production quality defects; (exclusive)!
Nitriding Commonly used for acid free plastics with GF less than 10%, such as PP PS AS ABS TPU TPE 38 CrMoAlA high quality alloy structural steel, quenching and tempering hardness HB260-280,nitriding hardness HV950±50 degrees, nitride layer depth 0.4-0.6mm, brittleness â?¤2
This is the whole line for the truck/car splash guard/fender production. Quick Details Condition: New Application: Plates Plastic Processed: PE Screw Design: Double-screw Automatic Grade: Automatic Place of Origin: Shandong, China (Mainland) Brand Name: zhenxiong Voltage: 380V 50HZ 3Phase(Customized) Power(W): 150-220kw Dimension(L*W*H): 25M*2.5M*3.5M Weight: 8-10t Certification: CE ISO9001 Raw material: PE LDPE HDPE Color: Customised Product: Truck/car splash fender guard Usage: anti-splash Warranty: 12 Months Other name: gold wash grass extrusion machine After-sales Service Provided: Engineers available to s
Plastic Ram Extruder  Machine For PTFE Rod(Φ80-150mm) This PTFE extruder is able to extrude rod which dia from 80mm to 150mm. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service.We can solve various problems to improve the equipment efficiency for you.Ram extrusion machine for Teflon rod The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 80 to 150 mm, Heating zones 5 zones The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 80mm-150mm Technical Data Description Model No. Machine model PFB-150 Plastic Extruder PTFE Rod Power 33 kw Min - Max Dia 80-150 mm Tolerance 1-2mm+ Length Unlimited Production Per Hour 8-16kg Electricity Consumption Per hour 2.5 kw Weight of the Machine 1220 kg High of the Machine 1680mm Floor area of the Machine 1.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days -
Machine width:1200/1400/1700/2200/2500mm Effective width:1100/1300/1600/2100/2400mm Machine speed:200-250m/min Screw diameter:LD-80mm to LD-115mm Extruder output:180kg/h,200kg/h,300kg/h,400kg/h Used resin:coated resins like LDPE/LLDPE/PP/EVA/EAA Coating thickness:5-45μm Sandwich diameter:MaxΦ600mm Max diameter:Unwinder&rewinder:Φ800mm Sandwich material:CPE/CPP/PET/Aluminium foils
