Rubber Flooring Suppliers and Manufacturers

Products Description Glycerol is a colorless, viscous, hygroscopic, sweet-tasting trihydric alcohol. It is also called glycerin or glycerine, with the term glycerol being preferred as the pure chemical form and the term glycerin(e) being primarily used when the compound is used commercially in various grades. Application 1) In medicine, it is used to making various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, preparation for external use ointment or suppository, with glycerol nitroglycerin used for explosive materials. 2) In the coatings industry, it is used for making all kinds of alkyd resin and polyester resin, epoxy resin and glycidyl ether. 3) In textile and printing industry, it is used for preparing wetting agent hygroscopic agent, fabric anti-creasing shrink proof treatment agent, dispersant and penetrating agent. 4) In the food industry , it is used as sweetener, tobacco hygroscopic agent and solvent. 5) In addition, in the paper, cosmetics, leather, photography, printing, metal processing rubber and other industries widely application.

Acetic Acid Acetic acid, also known as acetic acid and glacial acetic acid, with chemical formula of CH3COOH, is an organic monobasic acid, which is the main component of vinegar. Pure anhydrous acetic acid (glacial acetic acid) is a colorless hygroscopic solid with a freezing point of 16.6(62) and colorless crystals after solidification. Its aqueous solution is weakly acidic and highly corrosive, and steam can irritate eyes and nose. 1) Glacial acetic acid is one of the most important organic raw materials, mainly used in vinyl acetate, acetic anhydride, cellulose acetate etc; 2) Glacial acetic acid is an important raw material for synthetic fibers, adhesives and dyes, etc; 3) Glacial acetic acid is also an excellent organic solvent, widely used in plastics, rubber, printing and other industries.

Product Name Pine Oil Purity 85% CAS 8002-09-3 EINECS 232-688-5 FEMA NA Appearance light yellow to deep lemon liquid Application 1 Pine oil is a liquid mixture of macromolecular hydrocarbons distilled from pine roots at 240 ~ 400 C. 2 Pine oil is easy to dissolve in organic solvents such as ether, ethanol, soluble in glacial acetic acid, sodium hydroxide and other solutions, but difficult to dissolve in water. 3 Used as a foaming agent for metal flotation, a solvent for paint and ink, and a penetrating agent for textile industry. 4 Used as mineral processing agent, textile industry degreaser, printing and dyeing auxiliaries,etc. 5 Used as rubber softener, wood preservative, mineral flotation, felt, paint, plastics, etc. 6 Used in industry clean and wash, car wash etc

Adipic acid is a synthetic fiber, nylon 66, nylon engineering plastics, polyurethane foam, synthetic leather (PU), the main raw material of synthetic rubber and film, also can be used in medicine, pesticides, spices, such as the production of adhesives and soldering flux. Packaging & Shipping Logistics transportation methods can be divided into various ways according to the different transportation means. Different transportation ways had different features.We will consider wholelly and decide according to cargo situation,cargo type,delivery period,transportation cost. Iron drum & plastic drum packaging 1200kg/drum 850kg/drum 200kg/drum&plastic drum 180kg/drum&plastic drum 25kg/plastic drum&Cardboard bucket Plastic bag & kraft paper bag 1200kg/bag 50kg/plastic bag 25kg/plastic bag&kraft paper bag

Specifications Potassium Hydroxide is a white flake or colorless clear liquid. It is one of the strongest alkalis. Properties: Product Name:Caustic Potash or Potassium Hydroxide CAS No.:1310-58-3 EINECS No.:215-181-3 HS.Code:2815200000 Molecular Weight:56.11 Appearance: White Flake or colorless clear liquid Main Applications: Potassium Hydroxide is mainly used in alkaline batteries industry, soaps, high-class detergents and cosmetics. Industrial ,medicine intermediate, potassium chemicals, synthetic rubber, ABS resin, food additive dyestuffs and so on Packages: Plastic woven bags. According to customer's requirement. -Phosphoric acid -Polyethylene glycol/PEG 400, 600, 1000, 1500, 3000, 6000 Refined Glycerine 99.7% Descripitons

Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.

(1). Potassium hydroxide is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation, cresol, de-sulfuration in petroleum refining, bio-fuel and alkaline battery. (2). Potassium hydroxide can be used as a desiccant, sorbent, used for preparing potassium soap, oxalic acid and various salt, also used in electroplating, carving and so on. (3). Potassium hydroxide can be used for the production of potassium soap,alkaline battery, cosmetics in light industry (such as cream, cream and shampoo). (4). In the dye industry, Potassium hydroxide can be used for the production of vat dyes, such as vat blue RSN, etc.. (5). In the electrochemical industry, Potassium hydroxide can be used for electroplating, engraving, etc.. (6). In the textile industry, Potassium hydroxide can be used for printing and dyeing, bleaching and mercerizing, and used as the main raw material for synthetic fiber, polyester fiber manufacturing. (7). In addition, it is also used in metallurgical heating agent and leather fat, etc.. (8). Potassium hydroxide can be used as analytical reagent, reagent, carbon dioxide and water absorbent, and also used in pharmaceutical industry; (9). Potassium hydroxide can be used as the PH value of acid and alkali neutralization solution. (10). Potassium hydroxide can be used as the basic chemical reagent, carbon dioxide absorbent. saponification agents.

We are suppliers of BEST QUALITY RAPESEED MEAL and looking for serious buyers in need of our products, contact with us for more details * Moisture : 10% Max. * Protein : 38% Min. * Oil Content : 1% Max * Sand & Silica : 2.5% Max. * Fiber : 12% Max. * Rapeseed meal is being exported by many countries, the leading exporter of rapeseed meal. * Rapeseed meal is a coarse powder material, produced from rapeseed cake after series of preparatory physical processes followed by multistage extraction of oil under hygienically controlled conditions. * Rapeseed meal is having a extremely good amino acid composition, often compared to the milk protein, contributes to it is high nutritive value. The amino acid profile showing adequate lysine and methionine is very much favorable to the non-recruitment poultry feed. * Rapeseed meal is being used in India as an ingredient for cattle and poultry feed. It is also exported to various far east and Mediterranean countries and is well accepted by millers. * Our Rapeseed Lecithin is used as a Release agent for Plastic, a dispersing agent in Paints and Inks, Anti-sludge additive in Motor Lubricants, an Anti-gumming agent in Gasoline, an emulsifier, a spreading agent, and an Antioxidant in the Textile and Rubber industries.

SPECIFICATIONS FOR PINE WOOD SHAVINGS Product Name: Wood Shavings for Animal Bedding Material: 100% Clean Grade Pine Wood Colour: White Dust: 3-5% max Texture: Soft Size: 3mm to 12mm(Also depends on buyers) Moisture: Max 10 % Foreign matters: 0.1% Constant quality All-natural soft wood Maximum absorption 100% biodegradable Minimal dust Easy to clean Water resistant plastic bag Different sizes of wood shavings Kiln dried to kill harmful bacteria Reduction of respiratory diseases and allergies No staples that can cause injuries Packing:Compress in Block of 20kg-25kg(35x 55x30cm/80x40x40cm) or in jumbo bag of 600kg-1000kg We supply big quantity of Wood shaving as detailed specifications following: Size: 0.5 - 3 cm Wood type: Pine & Rubber & Acacia Moisture: Max 12% Powder: Max 3% Foreign Matter: Max 0.5% Packing Style: Compress and stuff in Jumbo bag, 20-23 tons/ cont 40 hc, (Depend on customer's request)

Products Description Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction, esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer. Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids. Application 1. Adipic acid is mainly used in the production of nylon fibers and engineering plastics. 2. It is also widely used in the production of polyurethane and other esters, most of which are used in the production of PU, shoe sole slurry, polyurethane foam, etc., and a small part is used as advanced lubricating oil. 3. Higher esters of adipic acid can be used as plasticizers for polyvinyl chloride and its copolymers, and natural synthetic rubber. 4. A large amount of adipate is used in polyvinyl chloride for food packaging, film and insulation. 5. Adipic acid is also used as an acidulant for various foods and beverages.

Product Name: Stearic acid price/price of stearic acid Active ingredients: Stearic acid Specification: 98% Testing Method: HPLC Appearance: White soft small pieces English name: Stearic Acid Stearic Acid oil plant and animal products - 829 this product in solid fatty acids, main ingredients for Stearic Acid (C18H36O2) and palmitic Acid (C16H32O2). Other name: Octadecanoic Acid, N-Octadecan Acid , Octadecan ACID , Cetylacetic Acid ,FEMA 3035, Carboxylic Acid C18 , C18 ,C18:0 , Fatty Acid , Acidum Stearicum 50 ,N-Octadecylic Acid , N-Octadecanoic Acid Application: 1. Metallic salts, lubricant and plasticizer in plastic industry 2. the curing active ingredient, the softener, the dispersing agent in the rubber industry 3. raw materials for different wax, like candle wax, tea wax etc. 4. the softening cream, cold cream in the cosmetics greasy raw materials 5. the softening agent in the paper industry 6. the emulsifier, the dispersing agent, the quality modifier in food industry Packing: 20kg/ bag, 17MT/20FCL, no pallets;12MT/20FCL with pallet;24MT/40FCL

Activated 4a zeolite adsorbent powder Xintao Activated Molecular Sieve Powder, has the character of high dispersibility and rapid adsorbability. It is used in some special absorptive circumstances, such as being formless desiccant, being adsorbent mixed with other materials etc. It can remove water eliminate bubbles, increase uniformity and strength when being additive or base in paint, resin and some adhesives. It can also be used as desiccant in insulating glass rubber spacer. Typical Application: (a) 2K-Polyurethane coatings and mouldings. (b)1K-Polyurethane storage protection. (c) Storage protection for metallic pigment paint. (d) Polysulfide and silicone systems. (e) Carriers for chemicals for controlled release. (f) Processing aid for polymer production. (g) Desiccant for the production of polymer desiccant materials. (h) Cosmetics additive. (i) Storage protection additives for highly hygroscopic goods. (j) Additives for flame retardants. (k) Shift of chemical reaction by removal of water as by product. Warranty: By National Standard HG/T 2524-2010. The storage time is more than 3 years. Free consultation during the warranty period.

CEM I 52.5N: - Whiteness: 85% - Clarity: 93% Applications: - Asthnique concrote structures - Prefabricated concrete element: precast panels, moldings, window and door sols, stairs; columns, garden furniture and decoration - Flooring: paving stones, mosaic tiles, terrazzo flooring, cast in place pavement - Dry mix products: cement glues, mortars, screeds Norms: - Tunisian Norm NT 47.01 - European Norm EN 197-1 - American Standards ASTM C150 Packaging: - Bagged 50kg, 40kg or 25kg, Kraft or plastic (PP) - Bigbag : 1.25T or 2.0T - Shrink-wrapped packs 1.7T, 1.95T or 2.2T, with optional sling and/or palettization - Bulk: silo trucks, or cargo vessels of up to 4000T For further information or to obtain the technical specification please contact us.

Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder