Brief Description of the Equipment: LTX - Wheelset Withdrawing Machine is mainly used for the railway wheels unloading (standard gauge, meter gauge, broad gauge, narrow gauge). Adjusting the position of the wheel movable supporting can adapt to different wheelsets and different process requirements. The equipment adopts the side pull board on the supine side, which has high strength and small occupy space, which facilitates the lifting and operation of the work-piece. The press head of the withdrawal cylinder adopts a spherical adjustment mechanism to prevent axle end damage and journal thickening. The auxiliary oil cylinder and the main oil cylinder are arranged on the same axis, ensuring that the axle keeps a parallel and stable movement during the withdrawal process. Linear guide rail type axle support device has rough positioning and longitudinal movement function (without power). It eliminates the need for crane cooperation during the wheel set withdrawal and saves a lot of manpower and material resources. Adopting the control form of interconnection between IPC and PLC, it has input functions such as axle number, wheel number and their respective manufacturer, production date, wheel withdrawal reason, withdrawal date, etc., and has the storage function of the above parameters and the maximum withdrawal force. Main Technical Parameters: 1.Main hydraulic cylinder stroke: 500mm 2.Max. withdraw force of main hydraulic cylinder: 4900kN 3.Support force of deputy hydraulic cylinder: 49-98kN 4.Hydraulic pressure of the hydraulic system: 25MPa�high pressure� 2.5MPa�low pressure� 5.Main cylinder speed: 60-180mm/min (working) 480-900mm/min (fast forward) 6.Withdraw beat: 10min / piece
Center enamel supply various sizes of Dry Bulk Storage tanks which are meet all your grain storage needs, no matter indoor or outdoor storage, whether with or without hopper substructure. Our grain storage silos are food grade. The capacity of dry bulk storage silo range from 50m3 to 20,000m3, so no matter it is small or large we also can supply you, your demand is our most motivation. Center Enamel's dry bulk storage silos engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our storage tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Our dry bulk storage silos have been field-proven in FDA and other food applications. Our bolted steel dry bulk storage silos allow for fast and easy installation on your site regardless of weather conditions and without heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel supplies a wide range of dry bulk storage tanks to meet your grain storage needs, whether indoors or outdoors, with or without a hopper base. Our granaries are food grade. The capacity of dry bulk warehouses ranges from 50m3 to 20,000 m3. No matter the size, we can meet your needs. Your demand is our greatest motivation. Our dry bulk storage silo is designed to meet or exceed the American Waterworks Association (AWWA D103-09 and EN / ISO28765:2011, and our tank engineers make tank engineering calculations for each specific tank structure according to the project local Environmental conditions, such as snow loads, wind speeds, seismic belts, etc., to ensure a sufficiently safe long-term service life of the tank structure. Our dry bulk storage silos are field proven in FDA and other food applications. Our bolt steel dry bulk bins allow quick and easy installation on your site, regardless of weather conditions and no heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center enamel supply various sizes of bolted steel grain storage silos which are meet all your grain storage needs, no matter indoor or outdoor storage, whether with or without hopper substructure. Our bolted steel grain storage silos are food grade. The capacity of glass fused to steel silo range from 50m3 to 20,000m3, so no matter it is small or large we also can supply you, your demand is our most motivation. Center Enamel's bolted steel grain storage silos engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our storage tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Our bolted steel grain storage silos have been field-proven in FDA and other food applications. Our bolted steel grain storage silos allow for fast and easy installation on your site regardless of weather conditions and without heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Brief Description of the Equipment: LTX - Wheelset Withdrawing Machine is mainly used for the railway wheels unloading (standard gauge, meter gauge, broad gauge, narrow gauge). Adjusting the position of the wheel movable supporting can adapt to different wheelsets and different process requirements. The equipment adopts the side pull board on the supine side, which has high strength and small occupy space, which facilitates the lifting and operation of the work-piece. The press head of the withdrawal cylinder adopts a spherical adjustment mechanism to prevent axle end damage and journal thickening. The auxiliary oil cylinder and the main oil cylinder are arranged on the same axis, ensuring that the axle keeps a parallel and stable movement during the withdrawal process. Linear guide rail type axle support device has rough positioning and longitudinal movement function (without power). It eliminates the need for crane cooperation during the wheel set withdrawal and saves a lot of manpower and material resources. Adopting the control form of interconnection between IPC and PLC, it has input functions such as axle number, wheel number and their respective manufacturer, production date, wheel withdrawal reason, withdrawal date, etc., and has the storage function of the above parameters and the maximum withdrawal force. Main Technical Parameters: 1.Main hydraulic cylinder stroke: 500mm 2.Max. withdraw force of main hydraulic cylinder: 4900kN 3.Support force of deputy hydraulic cylinder: 49-98kN 4.Hydraulic pressure of the hydraulic system: 25MPaïhigh pressureï 2.5MPaïlow pressureï 5.Main cylinder speed: 60-180mm/min (working) 480-900mm/min (fast forward) 6.Withdraw beat: 10min / piece
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel can be assembled arbitrarily, and they are connected tightly. They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. Material for this machine is galvanized steel plate, snowflake plate and colored steel plate Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Optional equipment Hydraulic automatic uncoiler Process flow: Decoiling-loading-molding-cutting-off-discharging Working space and workman for the equipment 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of stud and runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers.
This machine is perfectly combined two different-model machines together, this can save the space and also is easy to operate. The two models are chose according to customers'need. It consists of feeding platform, main molding core, shearing mechanism, hydraulic station, computer control cabinet, high precision counter and so on. A.Function and feature This producing line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products of it are used as the roof tile and wall panel outside of building, to increase the beauty and durability of the roof tile and wall panel. This line has no limit on processing length; you can set several different data on the computer control cabinet according to your own need. After pressing the button "Confirm", the machine can produce the panel automatically according to the set data. The molding plate surface smooth and not easy to be marked when it is being stamped. So it is easy to install. The product conforms to National Steel Construction Building Standard. B.Features of this producing line: Lower cost High efficiency Reliable working Low energy consumption D.Equipment parts Feeding platform Automatic shearing system Hydraulic system Computer control system (imported computer) High-precision automatic counter Productivity: 10-18m/min, 3500 m2/8hs Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel sheet E.Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler F.Working space and workman for the equipment Ground-level land 5T overhead travelling crane Space for storing the material Space for laying the machine Road for vehicle moving Workman: 2, operator and porter
Storage Shelf Rack Cold Metal Forming Machine The equipment is consisted with auto-de- coiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioning and cutting section, collection table and electrical control system etc. Shelf forming machine is . According to market demand by the collection year production cold rolling equipment experience independently designs a series or products. Product: Shelf column, Shelf crossbeam, Shelf stay rod, Shelf plywood etc. Features of this Shelf Rack Making Machine lower cost high efficiency reliable working low energy consumption Components of the Shelf Rack Rolling Forming Line 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment ·Manual uncoiler frame in different tons ·Hydraulic automatic uncoiler Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment 1. Ground-level land 2. 5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
This machine is perfectly combined two Different-model machines together, this can Save the space and also is easy to operate. The two models are chose according to Customers'need. It consists of feeding platform, main Molding core, shearing mechanism, hydraulic Station, computer control cabinet, high Precision counter and so on. A.Function and feature This producing line uses galvanized Steel sheet, colored armor plate or aluminum Plate as the material plate. The products of It are used as the roof tile and wall panel Outside of building, to increase the beauty And durability of the roof tile and wall Panel. This line has no limit on processing Length; you can set several different data on The computer control cabinet according to your Own need. After pressing the button "confirm", The machine can produce the panel Automatically according to the set data. The Molding plate surface smooth and not easy to Be marked when it is being stamped. So it is Easy to install. The product conforms to National steel construction building standard. B.Features of this producing line: Lower cost High efficiency Reliable working Low energy consumption D.Equipment parts Feeding platform Automatic shearing system Hydraulic system Computer control system (imported computer) High-precision automatic counter Productivity: 10-18m/min, 3500 m2/8hs Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel sheet E.Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler F.Working space and workman for the equipment Ground-level land 5t overhead travelling crane Space for storing the material Space for laying the machine Road for vehicle moving Workman: 2, operator and porter
This machine is perfectly combined two Different-model machines together, this can Save the space and also is easy to operate. The two models are chose according to Customers'need. It consists of feeding platform, main Molding core, shearing mechanism, hydraulic Station, computer control cabinet, high Precision counter and so on. A.Function and feature This producing line uses galvanized Steel sheet, colored armor plate or aluminum Plate as the material plate. The products of It are used as the roof tile and wall panel Outside of building, to increase the beauty And durability of the roof tile and wall Panel. This line has no limit on processing Length; you can set several different data on The computer control cabinet according to your Own need. After pressing the button "confirm", The machine can produce the panel Automatically according to the set data. The Molding plate surface smooth and not easy to Be marked when it is being stamped. So it is Easy to install. The product conforms to National steel construction building standard. B.Features of this producing line: Lower cost High efficiency Reliable working Low energy consumption D.Equipment parts Feeding platform Automatic shearing system Hydraulic system Computer control system (imported computer) High-precision automatic counter Productivity: 10-18m/min, 3500 m2/8hs Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel sheet E.Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler F.Working space and workman for the equipment Ground-level land 5t overhead travelling crane Space for storing the material Space for laying the machine Road for vehicle moving Workman: 2, operator and porter
Storage Shelf Rack Cold Metal Forming Machine The equipment is consisted with auto-de- coiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioning and cutting section, collection table and electrical control system etc. Shelf forming machine is According to market demand by the collection year production cold rolling equipment experience independently designs a series or products. Product: Shelf column, Shelf crossbeam, Shelf stay rod, Shelf plywood etc. Features of this Shelf Rack Making Machine lower cost high efficiency reliable working low energy consumption Components of the Shelf Rack Rolling Forming Line 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment ·Manual uncoiler frame in different tons ·Hydraulic automatic uncoiler Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment 1. Ground-level land 2. 5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 C-shaped keel can be assembled arbitrarily, and they are connected tightly. They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. Material for this machine is galvanized steel plate, snowflake plate and colored steel plate Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Optional equipment Hydraulic automatic uncoiler Process flow: Decoiling-loading-molding-cutting-off-discharging Working space and workman for the equipment 1. Ground-level land 2. 5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of Stud and Runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers
Storage Shelf Rack Cold Metal Forming Machine The equipment is consisted with auto-de- coiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioning and cutting section, collection table and electrical control system etc. Shelf forming machine is . According to market demand by the collection year production cold rolling equipment experience independently designs a series or products. Product: Shelf column, Shelf crossbeam, Shelf stay rod, Shelf plywood etc. Features of this Shelf Rack Making Machine lower cost high efficiency reliable working low energy consumption Components of the Shelf Rack Rolling Forming Line 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment ,·Manual uncoiler frame in different tons ,·Hydraulic automatic uncoiler Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment 1. Ground-level land 2. 5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel can be assembled arbitrarily, and they are connected tightly. They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. Material for this machine is galvanized steel plate, snowflake plate and colored steel plate Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Optional equipment Hydraulic automatic uncoiler Process flow: Decoiling-loading-molding-cutting-off-discharging Working space and workman for the equipment 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of stud and runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same roller
Storage shelf rack cold metal forming machine The equipment is consisted with auto-de- Coiler, guide frame, lever/feeding section, Continuous bottom hole punching section, Forming section, positioning and cutting Section, collection table and electrical Control system etc. Shelf forming machine is According to Market demand by the collection year Production cold rolling equipment experience Independently designs a series or products. Product: shelf column, shelf crossbeam, shelf Stay rod, shelf plywood etc. Features of this shelf rack making machine Lower cost High efficiency Reliable working Low energy consumption Components of the shelf rack rolling forming Line 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Cangzhou automatic metal storage rack shelf Rollforming equipment ·manual uncoiler frame in different tons ·hydraulic automatic uncoiler Cangzhou automatic metal storage rack shelf Rollforming equipment 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
Storage shelf rack cold metal forming machine The equipment is consisted with auto-de- Coiler, guide frame, lever/feeding section, Continuous bottom hole punching section, Forming section, positioning and cutting Section, collection table and electrical Control system etc. Shelf forming machine is according to Market demand by the collection year Production cold rolling equipment experience Independently designs a series or products. Product: shelf column, shelf crossbeam, shelf Stay rod, shelf plywood etc. Features of this shelf rack making machine Lower cost High efficiency Reliable working Low energy consumption Components of the shelf rack rolling forming Line 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Cangzhou automatic metal storage rack shelf Rollforming equipment ·manual uncoiler frame in different tons ·hydraulic automatic uncoiler Cangzhou automatic metal storage rack shelf Rollforming equipment 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 C-shaped keel can be assembled arbitrarily, and they are connected tightly. They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. Material for this machine is galvanized steel plate, snowflake plate and colored steel plate Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Optional equipment Hydraulic automatic uncoiler Process flow: Decoiling-loading-molding-cutting-off-discharging Working space and workman for the equipment 1. Ground-level land 2. 5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of Stud and Runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers.
This machine is perfectly combined two Different-model machines together, this can Save the space and also is easy to operate. The two models are chose according to Customers'need. It consists of feeding platform, main Molding core, shearing mechanism, hydraulic Station, computer control cabinet, high Precision counter and so on. A.Function and feature This producing line uses galvanized Steel sheet, colored armor plate or aluminum Plate as the material plate. The products of It are used as the roof tile and wall panel Outside of building, to increase the beauty And durability of the roof tile and wall Panel. This line has no limit on processing Length; you can set several different data on The computer control cabinet according to your Own need. After pressing the button "confirm", The machine can produce the panel Automatically according to the set data. The Molding plate surface smooth and not easy to Be marked when it is being stamped. So it is Easy to install. The product conforms to National steel construction building standard. B.Features of this producing line: Lower cost High efficiency Reliable working Low energy consumption D.Equipment parts Feeding platform Automatic shearing system Hydraulic system Computer control system (imported computer) High-precision automatic counter Productivity: 10-18m/min, 3500 m2/8hs Suitable process material: colored steel Sheet, aluminium steel sheet, and galvanized Steel sheet E.Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler F.Working space and workman for the equipment Ground-level land 5t overhead travelling crane Space for storing the material Space for laying the machine Road for vehicle moving Workman: 2, operator and porter
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel can be assembled arbitrarily, and they are connected tightly. They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. Material for this machine is galvanized steel plate, snowflake plate and colored steel plate Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Optional equipment Hydraulic automatic uncoiler Process flow: Decoiling-loading-molding-cutting-off-discharging Working space and workman for the equipment 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of stud and runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers.
Products made by this machine is easy to install, used together with different colors can make it appear dye-in-the-wood individual character. Width of 75, 100, 150, 200, and 300 c-shaped keel can be assembled arbitrarily, and they are connected tightly. They can be fixed on the device which is specially used for keels, they can tear down individually. Products made by this machine are suitable to use as building decorations, especially suitable to use in bedroom, kitchen, washroom, corridor and so on. Material for this machine is galvanized steel plate, snowflake plate and colored steel plate Technical parameter of product line: 1. Applied plank stuff: color armor plate 2. Applied slab thickness: 0.3-1.0mm 3. Charge in width: 1000mm 4. Line speed: 0-14m/min 5. Rolling rows: 16rows 6. Rolling diameter: 70mm 7. Dimensions: 8.5m*1.5m*1.6m 8. Weight: 5t 9. Power: 4kw+3kw Equipment parts 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Optional equipment Hydraulic automatic uncoiler Process flow: Decoiling-loading-molding-cutting-off-discharging Working space and workman for the equipment 1. Ground-level land 2. 5t overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of stud and runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers.
