Basic Specification: Accessories: According to different production batches, matching accessories may vary, and the actual product shall prevail! Any questions 1. Up to 95% power efficiency and more than 93% Full Load efficiency 2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation. 3. Intelligent temperature compensation function in the charging process, preventing the damage to battery caused by charge-off or charge due, greatly extending the lifespan of battery. 4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth). 5.Operation temperatureï¼?- 40â??ï½?85â??ï¼?Storage temperatureï¼?- 55â??ï½?85â??ï¼?Mechanical impact and vibration gradeï¼?QC/T 895ï¼?2011ï¼?Automotive-grade seismic rating. 6. Temperature control with built-in heat-sensing device and automatic recover through the thermal protection. 7. Multi-safety protection functions. 8. LED charge status indication with diagnose support function. 9. Available for various kinds batteries like LiFePO4, Lithium battery etc., Flexible and programmable of the charging mode. Equipped with Enable Control(Automatic Control) or CAN communication interface to realize real-time communication with BMS for options. 10.Input current:16A 11.Power factorï¼?â?¥0.99 12.Charging control: CAN or Enable 13.Sizeï¼?198(length) x 244(width) x 95(height)(fan-cooled) 14.Weight only 7.6 kg! 15.Cooling way: Enforce Air Cooling Safety protections: 1) Input over/under voltage and reverse polarity protection; 2) Output over current / short circuit and over temp protection.
MAIKE is specialized in the design and manufacture of high-quality customized planar transformers and inductors. The factory is based in Mianyang which is the only National Science & Technology city in China and is strategically placed to service the global electronics market. We design and manufacture for a variety of end-user applications ranging from Welding to Aerospace & Automotive & Battery Charging etc. The planar transformer is a transformer with high frequency, low profile, small height, and high operating frequency. Compared with conventional transformers, the size of the magnetic core of planar transformers is greatly reduced, especially when the height is reduced the most. This feature is very attractive in power supply equipment where space is strictly limited, making it the preferred magnetic component in many power supply equipment. The structural advantages of planar transformers also bring many advantages to its electrical characteristics: high power density, high efficiency, low leakage inductance, good heat dissipation, and low cost. Key Features-- (1) High current density. The wires of a planar transformer are actually planar conductors, so the current density is high. (2) High efficiency. The efficiency can reach 98%~99%. (3) Low leakage inductance. Approximately 0.2% of the primary inductance. (4) Good heat conduction. The hot aisle distance is short and the temperature rise is low. (5) Low EMI radiation. Good core shielding can keep radiation to a very low level. (6) Small size. The use of a small magnetic core can reduce the size accordingly. (7) The parameters have good repeatability. Because the winding structure is fixed and easy to pre-process, the parameters are stable. (8) Wide operating frequency range. The frequency can be from 50kHz to 2MHz. (9) Wide operating temperature range. The working temperature is -40 130. (10) Good insulation. The planar transformer is composed of overlapping conductive circuits and insulating sheets, thereby ensuring up to 4 kV insulation isolation between windings, primary-secondary and secondary-secondary.
Complete Automatic Aluminum Foil Container Making Machine Line Model: SEAC-55AS Units: Automatic Feeder+Automatic55Ton Press+Cavities Mould+Auto Stacker+Scrap Sucker & Auto Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: Aluminum foil; Thickness: 0.030mm ~0.250mm; Alloy: 8011, 8006, 3003, 3005; Temper O to H24; 2. Good Japan's Inverter, PLC and 10inch Touch Screen control system; 3. Max. Width of Aluminum foil: 600mm; 4. Max. Diameter of Aluminum foil: 700mm; 5. Core diameter of Aluminum foil: 76mm(152mm as Optional ); 6. Working speed: 40-75 times/min; 7. Total Power: 13kw; 8. Compressed air needed: 0.5- 0.8 Mpa, 0.2m3/min; 9. Install dimension: 6100*2600*3200mm; Technical Data: Max. Mould Size:L700*800*420mm; Slide block stroke: 120-200mm (Standard: 180mm); Automatic mould adjust unit: 0.5kw; Work plate dimension: 700*950mm; Mould handle hole dimension: 50*60mm(Diameter*Depth); Power: 3P, 380/220V, 50/60Hz; Net weight: 6000kg. SEAC-55AS is two cavities capacity for Aluminum foil container production now, it have instead of the old 40Ton model, as it is more big capacity to cover container size! Complete automatic level upgrade your factory capacity, lead your company be higher level competition and situation.
Very Profitable Aluminum Foil Container Production Line Complete Automatic Aluminium Foil Container Making Machine Model: SEAC-80/130AS (Four Cavities or Five Cavities Capacity !) Units: Automatic Feeder+Automatic 80Ton H Type Press+Cavities Mould+Auto Stacker+Scrap Sucker & Auto Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1.Raw material: Aluminum foil; Thickness: 0.030mm ~0.280mm; Alloy: 8011,8006,3003,3005; Temper O to H24; 2.Good Japan's Inverter, PLC and 10inch Touch Screen control system; 3.Max. width of Aluminum foil: 1220mm; 4.Max. diameter of Aluminum foil: 1000mm; 5.Core diameter of Aluminum foil: 76mm(152mm as Optional ); 6.Working speed: 40-75 times/min; 7.Total Power: 14kw+2kw+2.5kw+3kw; 8.Compressed air needed: 0.5- 0.8 Mpa, 0.4m3/min; 9.Install dimension: 7100*2600*3600mm; Technical Data: Max.mould size: 1480*1000*500mm; Slide block stroke:150-260mm ; (Offer Stroke adjustable system as option!) Automatic mould adjust unit: 0.5kw; Work plate dimension: 1500*1000mm; Mould handle hole dimension: 80*80mm(Diameter*Depth); Power: 4P, 380/220V, 50/60Hz; Net weight: 13,000kg. SEAC-80AS is the four cavities or five cavities capacity model production line for AFC. Complete automatic level upgrade your factory capacity, lead your company be higher level competition and situation.
Product Features * We have dedicated server to view online through Mobile / Laptop absolutely Free. * No Need and Static IP or DDNS Port Forwarding. It works with help of Unique ID. * It has 16 Video input, Four Audio Input and with HDMI Output Port with VGA and BNC. Features: 1. H.264 compression format 2. Mobile monitoring through their own software 3. One RJ45 / Lan / Ethernet Connector to connect DVR with your Modem. 4. Audio and video recording and play back simultaneously, 5. support NTSC/PAL video system 6. 16 CH video inputs, 1CH monitor output, 1CH spot monitor output, 1CH VGA output(1280*1024) 7. 4CH audio inputs, 1CH audio output 8. High quality image, brightness, contrast, sharpness and color adjustable for each channel 9. Support video sequence display 10. Display modes: PIP, FULL, QUAD, 8 SPLIT, 9/16 SPLIT 11. Recording modes: always recording, manual recording, schedule recording, sensor recording and motion recording 12. Detailed event log support 13. Searching modes: time/date searching, event searching, urgent searching 14. Support fast forward and rewind: x2, x4, x8, support jog-shuttle operation 15. Back up modes: network backup, USB back up 16. Support USB mouse and infrared remote controller operation 17. Support 2 SATA port upto 2 TB of HDD 19. Multiplex operation: live/recording/playback/network can be operated at the same time 20. Telemetry network control: live view, playback, recording and so on 21. Dimension: 25 x 23 x 4.5cm/9.84 x 9.05 x 1.77"(L x W x H) In The Box 1 x ZVision 16 Channel H.264 DVR Network Digital Video Recorder with HDMI Port 1 x Mouse 1 x Charger 1 x Power cord 1 x Remote control 1 x CD Disk
Product Features * We have dedicated server to view online through Mobile / Laptop absolutely Free. * No Need and Static IP or DDNS Port Forwarding. It works with help of Unique ID. * It has 16 Video input, Four Audio Input and with HDMI Output Port with VGA and BNC. Features: 1. H.264 compression format 2. Mobile monitoring through their own software 3. One RJ45 / Lan / Ethernet Connector to connect DVR with your Modem. 4. Audio and video recording and play back simultaneously, 5. support NTSC/PAL video system 6. 16 CH video inputs, 1CH monitor output, 1CH spot monitor output, 1CH VGA output(1280*1024) 7. 4CH audio inputs, 1CH audio output 8. High quality image, brightness, contrast, sharpness and color adjustable for each channel 9. Support video sequence display 10. Display modes: PIP, FULL, QUAD, 8 SPLIT, 9/16 SPLIT 11. Recording modes: always recording, manual recording, schedule recording, sensor recording and motion recording 12. Detailed event log support 13. Searching modes: time/date searching, event searching, urgent searching 14. Support fast forward and rewind: x2, x4, x8, support jog-shuttle operation 15. Back up modes: network backup, USB back up 16. Support USB mouse and infrared remote controller operation 17. Support 2 SATA port upto 2 TB of HDD 19. Multiplex operation: live/recording/playback/network can be operated at the same time 20. Telemetry network control: live view, playback, recording and so on 21. Dimension: 25 x 23 x 4.5cm/9.84 x 9.05 x 1.77"(L x W x H) In The Box 1 x ZVision 16 Channel H.264 DVR Network Digital Video Recorder with HDMI Port 1 x Mouse 1 x Charger 1 x Power cord 1 x Remote control 1 x CD Disk
Welding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube/single module to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,30khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11.Coloered LCD display,easy to use Model TIG200 TIG250 TIG250PFC ACDC TIG300 ACDC TIG400DC TIG500DC TIG500 ACDC Rated Input Voltage(V) 1~230 3~400 95-275 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 33 30 25 22 31.5 43 43 No-load Voltage(V) 68 68 68 70 70 70 70 Power Factor 0.65 0.7 0.99 0.7 0.7 0.7 0.7 Output Current Range (A) 5-200 5-250 10-250 5-300 5-400 5-500 10-500 Duty Cycle(%)40C�° 25% 60% 25% 60% 60% 60% 60% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 8.5 12 13 22 22 28 40 Dimension(mm) 410x180x330 410X180X330 410X180X330 410X220X405 650X285X510 650X285X510 680X285X510 WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products. Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock. For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement . Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc.
Product Description 200A/250A/300A/400A/500A/630A DC TIG Welder/MMA Welder/DC Welder/TIG Welding Machine Lift TIG/Hf TIGWelding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,35khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,over voltage,under voltage protection to prevent machine damage 10.Colored LCD display,easy to use WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products.Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock.For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement. Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc. Model CUT-30 CUT-45PFC CUT-60CNC CUT-65CNC CUT-80CNC CUT-100CNC CUT-120CNC Rated Input Voltage(V) 1~230 95~275 3~400 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 40 29 15.7 18 30 33 43 No-load Voltage(V) 320 265 400 400 415 415 415 Power Factor 0.65 0.99 0.7 0.7 0.7 0.7 0.7 Output Current Range (A) 10-30 10-45 15-60 15-65 15-80 15-100 15-120 Duty Cycle(%)40C�° 25% 25% 60% 60% 60% 60% 80% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 7 8.5 18 20 25 30 32 Dimension(mm) 360x180x330 410X180X330 410X220X405 410X220X405 450X220X405 450X220X405 550X260X490
Product Description 200A/250A/300A/400A/500A/630A DC TIG Welder/MMA Welder/DC Welder/TIG Welding Machine Lift TIG/Hf TIGWelding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,35khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,over voltage,under voltage protection to prevent machine damage 10.Colored LCD display,easy to use WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products.Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock.For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement. Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc. Model CUT-30 CUT-45PFC CUT-60CNC CUT-65CNC CUT-80CNC CUT-100CNC CUT-120CNC Rated Input Voltage(V) 1~230 95~275 3~400 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 40 29 15.7 18 30 33 43 No-load Voltage(V) 320 265 400 400 415 415 415 Power Factor 0.65 0.99 0.7 0.7 0.7 0.7 0.7 Output Current Range (A) 10-30 10-45 15-60 15-65 15-80 15-100 15-120 Duty Cycle(%)40C�° 25% 25% 60% 60% 60% 60% 80% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 7 8.5 18 20 25 30 32 Dimension(mm) 360x180x330 410X180X330 410X220X405 410X220X405 450X220X405 450X220X405 550X260X490
Ultima trading is engaged in the production, export and distribution of wood products and agricultural goods to European countries. Thanks to the quality of our products, well-established logistics and customer support from start to finish, we have taken a leading position as an exporter of heating products from Ukraine for 5 years, so more than 50 companies cooperate with us. In 2022, we have significantly increased our production capacity, so we are looking for new partners around the world. All products comply with Ukrainian and European standards, DIN, DIN+. Unlock the power of Wood Pellets! With high energy efficiency, easy storage, and eco-friendly burning, our pellets are the ultimate choice for heating. Embrace clean, sustainable energy while enjoying consistent warmth. Upgrade to Wood Pellets and experience the perfect balance of convenience and environmental responsibility. Make the switch today and elevate your heating game! Production capacity: 1000 tons per month Price: 210 â?¬/ton Quality standards - A1, A2 Types of wood: - pine - oak Quality indicators: - Length 4-8 mm - Diameter 6 mm - Ash content up to 0.7% - Moisture content up to 6% - Thermal conductivity 5000-5500 kcal - Sulfur content 0.02%. Advantages: - High heat output - Clean combustion - Convenient and easy to use - Low moisture content - Suitable for various heating applications Packaging: - Plastic bags 15kg - Big bags Branding: - Own brand - Private label plastic bags Lead time: -7 days -private label bags: 20 days Delivery info: - inland, by sea - door-to-door delivery - delivery terms: FCA, DAP, DDP, FOB, CFR, CIF Logistics info: - 21-23 pallets - 66 pcs/pallet - Truck capacity: 21-23 tons Our other products: 1. Lump wood charcoal 2. Apple wood charcoal 3. A1 En Plus wood pellets 4. Pini Kay 5. Ruf 6. Nestro 7. Firewood | nets 8. Firewood | crates 9. Fence posts We are looking for international customers for long-term cooperation! Write to us on OLX, telegram or whatsapp and get professional advice from our managers. telegram: yk_yk7 facebook: Ultima Trading whatsapp: phone number - pellet a1, pellets a1, buy pellets a1, fuel pellets, fuel pellets in granules, buy pellets, pellet production, pellets price, wood pellets, pellets from sunflower husk, pellets for heating, fuel pellets to buy, pellets for the boiler, pellets price per ton, wood pellets, pellet to buy, buy pellets from sunflower husks, pellet production, wood pellets, buy pellets for heating, buy pellets for the boiler, pellet a2
1. Equipment usage: This testing ± 1/500000, Relative error of indication: better than ± 1% of the indication, 2 displacement (moving crossbeam, excluding stretching fixture), Measurement range: 0-700mm, Resolution: 0.0025mm, 3 Test speed: Speed adjustment range: 0.01-500mm/min (stepless speed regulation), Accuracy: better than ± 0.5% of the indicated value, Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 0.1mm/min; When the speed is 0.1mm/min, within ± 0.2% of the set value, 4 Control: Force control speed regulation range: 0.005-5% F.S/S, Force control rate control accuracy: within �± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, within the set value of ± 0.5%/ ± 1.0%, Deformation speed regulation range: 0.005% FS/S, Deformation rate control accuracy: within ± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, it is within ± 0.5% of the set value, Constant force, constant deformation, and constant displacement control range: 0.5% -100% FS/S, Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is â 10% FS; When the set value is less than 10% FS, within ± 1% of the set value. 5 Effective test space (with fixture): Effective stretching space: 700mm, Effective compressed space: 700mm, 6. Working environment: Room temperature 10~35 , humidity 20%~80%, 7. Power supply for the entire machine: single-phase, 220V ± 10%, 50Hz, 8 Host size: 530 370 1400mm, 9 Weight: 140 kg,
Save time and labor. Direct seeding of rice is direct sowing, just like wheat, eliminating the process of raising seedlings, and transplanting, and there is no need to occupy rice fields for raising seedlings. Direct seeding of rice does not have the process of regreening and seedling injury, so the growth period is shorter than that of transplanted rice in the same period. Direct seeding of rice is simple and convenient, which is conducive to large-scale development. The Yongxiang SeedHub with Intelligent tablet APP, central control system and radar sensor ensures precise distribution even in windy conditions. Using the electrically controlled metering shaft, the seed enters the air channel where it is conveyed by the blower fan to the ends through plastic hoses. Using radar speed measurement and centrol control system to accurately control the sowing amount, the sowing accuracy is as high as 98%. Description: 1. Direct rice seeding machine with 8/12 Rows optional 2. Smart Tablet APP control precise seeding volume 3. Easy to attach on most brand riding transplanter (Yanmar, Kubota, Iseki .etc) 4. Rice seed roller with seeding rate from 7.5-600kg/ha 5. 12V transplanter battery power supply 6. Stepless motor, tablet control box, radar sensor combined working for high precise seeding rate control 7. Only set the seeds rate in control tablet APP and seeder works 8. Seed Level, Seed rate and catlibration, working width on control APP tab 9. Anti-blocking, leakage, empty box alarm device 10. Remain seeds discharge operation on control tab 11. Water ditcher and seeds line maker, conducive to the field water in/drainage
1. Screen size: 21.5 inches (IPS display), resolution: 1920*1080 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut.Whats more,it adopts IPS technology as a hard screen, and it has a wide viewing angle of 178�°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience :The nib uses a special technology to truly restore the delicate friction between the nib and the screen,and with 16384 pressure level,it can accurately judge the strength of each stroke.In addition, An anti-glare screen effectively the disturbance and discomfort caused by strong light reflection,and simulate the feeling of painting on paper. 4.Multi finger touch: Move your fingertips slightly, rotate the canvas, zoomed in and zoomed out, present your creativity authentically. 5.Battery: With built-in large capacity battery, there is no need to connect power and no worry when going out. 6.Convenience: It owns 8 user-defined shortcut keys(each side has 4 shortcut keys),so that users can say goodbye to the mouse and keyboard and then easily control the overall of the canvas;The body comes with a metal handle and supports pen magnetic storage,which make it more portable and easy to travel. 7.Comfort: With foldable and adjustable metal bracket, its easy to adjust to a comfortable angle, ergonomic design, it can tilt by 19�°after opening,and when not in use, it can be retrieved. 8.With 21.5 full fit digital screen, Bosto X7 gives you something priceless: space. So that you won't waste time searching for that reference image or opening and closing different programs on a secondary screen. And there'll be less zooming in and out too. Now you can save time and take control of your creativity, for a more efficient, controlled workspace.
1. Pen tablet and drawing tablet, screen size: 21.5 inches (IPS display), resolution: 1920*1080 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut.Whats more,it adopts IPS technology as a hard screen, and it has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience :The nib uses a special technology to truly restore the delicate friction between the nib and the screen,and with 16384 pressure level,it can accurately judge the strength of each stroke.In addition, An anti-glare screen effectively the disturbance and discomfort caused by strong light reflection,and simulate the feeling of painting on paper. 4.Multi finger touch: Move your fingertips slightly, rotate the canvas, zoomed in and zoomed out, present your creativity authentically. 5.Battery: With built-in large capacity battery, there is no need to connect power and no worry when going out. 6.Convenience: It owns 8 user-defined shortcut keys(each side has 4 shortcut keys),so that users can say goodbye to the mouse and keyboard and then easily control the overall of the canvas;The body comes with a metal handle and supports pen magnetic storage,which make it more portable and easy to travel. 7.Comfort: With foldable and adjustable metal bracket, its easy to adjust to a comfortable angle, ergonomic design, it can tilt by 19°after opening,and when not in use, it can be retrieved. 8.With 21.5 full fit digital screen, Bosto X7 gives you something priceless: space. So that you won't waste time searching for that reference image or opening and closing different programs on a secondary screen. And there'll be less zooming in and out too. Now you can save time and take control of your creativity, for a more efficient, controlled workspace.
ZP420 series rotary tablet press is a new type of tablet press machine recently developed by our company. It has novel appearance, reasonable structure, convenient operation, stable running, safe & reliable electrical protection functions, and it meets the latest GMP requirement. It is an ideal model choice for upgrading instead of old ones. Product INTRODUCTION Application This machine is a double-press type continuous automatic tablet press machine for pressing granular raw materials into tablets. It is mainly used in pharmaceutical, chemistry, foodstuff, electronic industries and suitable for pressing a variety of tablets, such as: medicine tablets, candy tablets, calcium tablets, camphor pills, slat tablets and powder metallurgy products.. Features 1.Double press type with high productivity, suitable for mass production of tablets. 2.HMI operation interface is rich and friendly which can display real-time working pressure, rotating speed, output counter, real-time position of main pressure wheel & filling track, etc. 3.Made of stainless steel, the housing is fully closed. The surface of the rotary turret is covered with a hardened layer so that the turret surface is wear resistant. 4.Adopt transparent windows, tableting state can be observed clearly. The windows can be opened, cleaning and maintenance is easy. 5.The machine is equipped with pressure sensor, which can display the working pressure in real time and the machine can stop automatically in case of overpressure. 6.Speed adjustable, operation simple and running reliable. 7.Adopt automatic lubrication system which can fully lubricate the pressure wheels, tracks and punches, so as to extend the machine service life. 8.Adopt powerful motor and high-precision reducer, achieve high torque stable & strong power output. 9.Various safety protection functions (emergency stop, over-pressure stop, door and window lock-protection) 10.Adopt oil-proof, dust-proof and noise proof design.
This light gantry CNC plasma cutting machine doesn't have working table, so it can withstand heavy cutting of iron sheet. When we ship this machine, we can dismantle the whole machine, the packing size is only 4 cbm. So this can save a lot of transportation costs. It can be equipped with any plasma power supply, such as China Huayuan, American Hypertherm and so on. Applicable Materials: Sheet and tube of carbon steel, stainless steel, aluminum, copper and other non-ferrous metal . Features of light gantry CNC plasma cutting machine: 1. Two cutting modes optional: plasma plate cutting and tube cutting. 2. Gantry structure, perfect bearing capability. The machinesâ?? body is strong, rigid, high precision, reliable and durable. 3. Adopt well known plasma power USA Hypertherm supply and cutting torch. 4. Cutting edge is small and smooth ,without any drop outs, thickness for metal cutting is up to 30mm. 5. With Arc voltage Auto Height-adjusting Device, arcing success rate over 99% and can protect cutting torch from damage, increase cutting quality. 6. Adopts Imported high-precision Hiwin Linear guide rails, smooth movement, to ensure that the machine tools high-precision. 7. Drive gear and rack ,customized from professional manufacturer, is surface processed by cemented quenching, which can prolong machineâ??s using life. 8. Step and Servo drive system is available, which with features of function detecting ,high running precision, wide speed range and short speed up time. Parameters of light gantry CNC plasma cutting machine: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Working Size 1500mm*3000mm Max Cutting Speed 20000mm/min Cutting Thickness(Plasma)(mm) 1-30mm Power 45A/65A/85A/105A/125A/200A Precision �±0.01mm File output mode USB interface Command Code G code/*.MMG/*.PLT/*.eng Packing type Standard plywood case Table Saw tooth table(Optional Blade table) Weight 1500KG
Application (1)Aluminium clad steel wire/strand is used for various voltage level power transmission lines , overhead transmission lines and overhead ground wires. (2)It can also be applied in various special areas with long span length, coastal areas and island as well as other hot and humid regions, salt fog regions and heavily polluted regions where the high corrosion resistance strand is needed. (3)Aluminium clad steel wire/strand can also be used as messanger wire for electrified railways. Specification Nominal Diameter Area Min Tensile Strength Calculated Breaking Load Min Coating Thickness 20 �ºC Max D.C Resistance at 20 degree Weight mm AWG Mm2 Mpa KN mm Ohm/KM Kg/Km 2.052 12 3.307 1340 4.5 0.103 25.64 21.80 2.304 11 4.169 1340 5.6 0.115 20.34 27.49 2.589 10 5.260 1340 7.1 0.130 16.12 34.66 2.904 9 6.633 1340 8.9 0.145 12.78 43.65 3.264 8 8.367 1340 11.2 0.163 10.14 55.14 3.477 7 9.495 1310 12.4 0.174 8.93 62.57 3.665 7 10.55 1280 13.5 0.183 8.04 69.48 3.934 6 12.16 1240 15.1 0.197 6.93 80.13 4.115 6 13.30 1210 16.0 0.206 6.38 87.62 4.392 5 15.15 1170 17.7 0.220 5.60 99.84 4.620 5 16.76 1140 19.1 0.231 5.06 110.50 4.775 4 17.91 1100 19.7 0.239 4.73 118.0 5.189 4 21.15 1070 22.6 0.259 4.01 139.34
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
