XC701 DC36V Motor Controller for Fountain Pumping System Let water dance to music. XC Motor Control Technology is one of the earlier companies involved in motor controller for fountain pump controller. XC701 motor controller is engineered for (music) fountain pumping system and has been widely used in China for landscape. Excellence in performance and reliability had been recognized and approved by clients and market. After several iterations, XC701 motor controller can adapt to various application circumstance. itâ??s one of the best sellers in portfolio of XC motor controllers. Technical requirements on fountain pump controller could be diverse and particular, backed by sophisticated RD team, we are able to provide bespoke service for customers. If you have any specific requirement, we help you achieve it. This BLDC motor controller for fountain pumping system comes with characteristics: Specification: Model: XC701 Working Voltage: DC13.5-30.5V Rated Current: 31.5A Working Temp: -45-85â?? Humidity: 95% Max Dimension: 71*68*26mm Protection: Undervoltage protection, over voltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection Protocol: DMX512 protocol XC Motor Control Technology pioneers advanced solutions in BLDC motor control system. With considerable expertise, we have been serving top clients such as FAW group, Dongfeng NISSAN, XPeng Aero car, Cummins and more. The potent combination of hardware and advanced software can keep your device working at optimal. Have a try, you are worth a better solution.
Automotive Fuel Pump Controller XCA105 Improves Performance of Fuel Pump Xiongcai automotive fuel pump controller XCA105 is engineered to improve running efficiency of automotive oil pump. This automotive fuel pump controller is designed for a large automotive fuel pump manufacturer. Engineered from ground, we provided a full service from design, analysis, testing to production. This product has been applying in top brands FAW group, Dongfeng NISSAN, Cummins, etc. XCA105 motor controller can adjust the working parameters of fuel pump according to Vehicleâ??s running conditions and engine status to ensure stable fuel supply. The automotive oil pump controller will monitor oil pump all the time, if there is an abnormality, the controller will send signals for detection, ensuring vehicle safety. XCA105 automotive fuel pump controller features: 1. Working voltage: DC8~18V 2. Rated current: 8A 3. Operating temperature: -40 ~ 125 4. Working humidity: 95% Max 5. Overall size: 37*34*8MM 6. Protection type: under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit protection 7. CSIPER 25 radiation and conduction level 3 certified 8. ISO11452-2 EMS level 4 BCI 100MAcertified 9. ISO10605 contact discharge 8KV and air discharge 16KV certified 10. ISO16750 environment certified This product is highly reliable and durable. To adapt extreme working environment. automotive oil pump controller adopts high temperature resistance, waterproof, dustproof and vibration-resistant designs to achieve high reliability and durability. We are an IATF16949 certified company. We proud ourselves on providing reliable, durable products for top clients like FAW Group NISSAN, XPeng Aero car, Cummins and more Have a try, with expertise in this specialized field, Xiongcai Motor Control Technology Co., Ltd is able to take your technological aspirations to a new level.
In winter, the temperature is low, and the freezing and low-temperature climate caused by rain and snow can easily cause equipment to freeze and crack. In order to ensure the safe and normal operation of the equipment, what do we need to pay attention to. Letâ??s find out. First, insulation materials need to be added to the water pump to prevent the water pump from freezing; Second, empty the slurry in the pump chamber of the water pump that is not in use temporarily, and then refill the pump when in use. This can also effectively prevent the water pump from freezing and cracking; Third, if our slurry pump is in the basement, the doors and windows need to be closed, and the unfinished underground pump room and wind tunnels must be blocked with something. Fourth, because our slurry pumps undergo water closure tests when they leave the factory, there will be water in the pump chamber and pipelines of the factory slurry pumps. If the equipment is not ready to be installed and used, the pump chamber needs to be removed. Drain the water inside. Fifth, when we find that the water pump has become slurry, do not start the slurry pump. You can use hot water or boiling water to pour into the pump cavity to melt the ice, or heat the casing of the water pump. Sixth, if conditions permit, move the slurry pump to a warm place to melt ice naturally. If you want to know more about slurry pumps, please feel free to call us! Shijiazhuang Pansto Pump Industry is a manufacturer of slurry pumps in Shijiazhuang. It mainly designs, manufactures and sells slurry pumps and accessories. Mainly engaged in mud pumps, submersible pumps, foam pumps, desulfurization pumps and many other series. Single-stage slurry pump, slurry pump diagram, slurry pump curve, slurry pump specifications Slurry pump brand Warman slurry pump ZJ slurry pump ZGB slurry pump AH slurry pump SP slurry pump vertical liquid slurry pump
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Product Introduction: The new standard applies to GB7588.1  Adopting LDC1000B integrated controller Super anti-interference serial communication method ,without the need for shielded wires for hall calls and car communication lines The terminal board is highly integrated and fully prefabricated cables to prevent incorrect plug insertion. â? Equipped with safety and door circuit node indicator lights,as well as independent short circuit sockets for easy debugging and maintenance. Equipped with UCMP to prevent accidental movement of the lift car and door lock bypass device  The cabinet body adopts environmentally friendly zinc free galvanized sheet,which is aesthetically pleasing and has a small volume.  Floor mounted and wall mounted Technical parameter: Suitable for business elevators,residential elevators,freight elevators,etc  Maximum speed:3.5 m/S  Input voltage:AC 220V/380V/510V  Power range:5.5KW-30KW Adapted motor:PM/IM â? Adaptive holding brake:currentâ?¤5A,DC48V-220V continuously adjust- able (1V unit) â? Adapted door operator:AC220V door operator system â? Maximum floors:64  Control mode:single elevator/group control  Deceleration method:Distance control directly stops  Size(mm):1300*350*250(height,width,thickness)  Control cabinet weight (kg):35.5
CPU Ceramic Processor Scrap Wholesale. We have very good quality high yield Cpu Ceramic Scrap for rare metals recovery. We offer a wide rage of high yield for computer scrap products and below is a list of the cpu scrap types we have. -Intel 486 & 386 Cpu -Intel I960 & Motorola Cpu -Intel Pentium Pro Cpu -AMD 486 & 586 Cpu -Gold Top Cpu -Gold Top & Bottom Cpu -Intel Pentium 1 -DLP Cpu -Computer CPU Scrap -Scrap Ceramic CPU -Scrap Ceramic CPU with Aluminum Cap -Scrap Black Plastic CPU -Scrap Plastic CPUâ??s -Ceramic Pentium pro -CPU 486 ceramic Huge Gold Quantity: Intel 186 / 286 / 386 / 486 / Pentium / Pentium Pro / i86 / i960 Cyrix 486 / 586 / MIIIBM 486 / 586 / 686 Motorola 68000 / 88000 series NEC & Toshiba MIPS series: R4000 / R8000 / R10000 / R12000 GOLD RECOVERY FROM CERAMIC PROCESSORS(Scrap CPU) Cpu Ceramic Scrap is very easy and profitable business. Different processors have different quantity of rare metals. Some types of ceramic processors are below. Cpu Scrap recycling method is so easy. You can easily recover rare metals and silver and make money. For these processors, you don't need to prepare anything like ic chips you will need to remove from electronics boards first.
Product Description Sizes S, M, L, XL Colors Carbon/Chameleon Mars Frame Advanced-Grade Composite front and rear triangles, 135mm Maestro suspension, flip chip Fork RockShox Pike Select, 150mm, Boost 15x110 Maxle Stealth, 42mm offset, custom tuned for Giant Shock RockShox Deluxe Select+, 185/55, custom tuned for Giant Handlebar Giant Contact Trail, 35 Stem Giant Contact SL 35 Seatpost Giant Contact Switch dropper with remote, 30.9 Saddle Giant Romero SL, SST rails Pedals N/A Shifters SRAM NX Eagle Front Derailleur N/A Rear Derailleur SRAM NX Eagle Brakes Shimano MT520 hydraulic 4-piston (F:203mm, R:180mm) Brake Levers Shimano MT501 Cassette SRAM NX Eagle, 12-speed, 11x50 Chain SRAM NX Eagle Crankset Truvativ Descendent 6k Eagle, DUB Boost, 30t Bottom Bracket SRAM DUB, press fit Rims Giant TRX-2 29 Carbon WheelSystem, 30mm inner Hubs Giant TRX-2 29 WheelSystem, Boost Spokes Giant TRX-2 29 WheelSystem, DBL technology Tires [F] Maxxis Minion DHF, tubeless, 29x2.5, WT, 3C, MaxxTerra, EXO, TR [R] Maxxis Dissector, tubeless, 29x2.4, WT, 3C, MaxxTerra, EXO, TR
100% cotton Our women's hand-embroidered t-shirts, where art and fashion intertwine to create a truly unique and captivating piece. Each t-shirt is meticulously crafted by skilled artisans, bringing to life elaborate designs that are sure to draw attention and start We understand that not only is style important, but comfort is equally essential. That's why we use high-quality, soft, and breathable fabrics for our t-shirts â?¢ Care Instructions: Hand Wash. Do Not Bleach â?¢ Our hand-embroidery women's t-shirts are versatile, making them suitable for various occasions. Whether you're dressing up for a celebrations, holidays, festivals, birthdays, and travel, our t-shirts effortlessly elevate any ensemble. Pair them with jeans, skirts, or shorts to create a unique and stylish look that reflects your individuality. The hand embroidery designs are endless, and you can always customize them to suit your preferences and the occasion you have in mind Our hand-embroidery women's t-shirts are more than just clothing; they are wearable art that allows you to express your unique personality and style. With their exceptional quality, comfort, and striking designs, these t-shirts are bound to become your favorite go-to pieces With these one-of-a-kind creations, you can express your personal style and showcase your love for art â?¢ Disclaimer: This product is hand embroidered and may have slight dissimilarities that are a natural outcome of the human involvement in the process. These minor variations of Stitches/Motifs add to its charm and ensure you have a unique product Bust Size: (S) 34 inch; (M) 36 inch; (L) 38 inch; (XL) 40 inch
Organic, Pure, Undiluted, Potent, Healing-grade, Connoisseurs-Intended Quality, Clean, Made From a Locally Grown Herb-Only, Adriatic Sea Melissa Essential Oil Distilled from a locally bred-only Melissa officinalis, carefully nourished on a rocky soil of the Eastern Adriatic Sea region, within the Mediterranean climate conditions, indigenous, and the most suitable for breeding of the Melissa herb. It is being distinguished for possessing the chemotype structure of the exquisite medicinal value. What makes Eastern Adriatic Sea Melissa herb/essential oil profoundly special? During the domestic research work on realization of the Immortelle seedlings introduction into the organic production, it was shown that the area of the town Ljubinje, i.e. Herzegovina region, has better climatic and pedological (soil) conditions for growing not just Immortelle herb, but numerous other herbal, and plant species, as well, which results in their prominent therapeutic/healing characteristics, in comparison to Europeâ??s/French well-known regions of Provence, and Corsica. Herzegovina region, a worldwide heritage of more than 700 medicinal herbs and plants, many of which are endemic, specific/unique climatic, and soil characteristics, represents the mix of a warm Mediterranean, and cold Alpine mountains atmospheric conditions, followed by the rocky soil, rich in limestone. It is exactly these, upper stated, Nature itself-given aspects, that are resulting in the inimitable chemotype structure of Melissa, and other essential oils, distilled from the herbs and plants, collected within the Herzegovina region borders. Botanical Name: Melissa officinalis Extraction Method: Steam distilled Part of Plant Distilled: Leaves, flowers Country of Origin: Bosnia and Herzegovina Composition: 100% Melissa officinalis Consistency: Thin to medium viscosity Cultivation Method: Organic Scent Description: Sweet and lemony fresh, floral, slightly herbaceous, with subtle notes of mint and honey
Adriatic Sea Immortelle (Helichrysum Italicum; the most valued chemotype in the world) Essential Oil Steam distilled from wild/indigenous, native to the Eastern Adriatic Sea coastal area-only, Italicum variety, grown on a rocky soil, within the Mediterranean climate conditions, the most suitable for breeding of this variety, distinguished for possessing the chemotype of the highest medicinal value, among all of the other Helichrysum, and furthermore, Italicum varieties. What makes Eastern Adriatic Sea Italicum variety of Helichrysum profoundly special? There are a hundreds of Helichrysum varieties, throughout the world, but few-only produce essential oil. Furthermore, out of these few ones, Italicum varieties hold the most prominent therapeutic/healing characteristics. Moreover, it has been acknowledged that the indigenous Italicum species, originating from the Eastern Adriatic Sea coastal area, more specifically, Dalmatia, and Herzegovina regions, are being distinguished by possessing the most healing chemotype, comparing to rest of the, before-mentioned, Italicum existing varieties. What this means in practice, and why it is important? Let us take the region of Herzegovina, as an example: Herzegovina is a worldwide heritage of more than 700 medicinal herbs and plants, many of which are endemic. That being said, it is exactly the synergy of the specific (rocky) soil and climatic qualities (mix of warm Mediterranean, and cold Alpine mountains climate) of this region, that is resulting in the inimitable chemotype characteristics of Helichrysum Italicum, and other essential oils, distilled from the herbs and plants, collected within itâ??s borders. Botanical Name: Helichrysum italicum Extraction Method: Steam distilled Part of Plant Distilled: Flowers Country of Origin: Bosnia and Herzegovina Composition: 100% Helichrysum italicum Consistency: Thin viscosity Cultivation Method: Organic/Wild-crafted Scent Description: Sweet and bitter, warm, rich and curry-like, fresh, earthy, herbaceous with subtle tea-like attributes
Aluminum ingots A7, A8. Aluminum ingots P0202A, P0303A, P0404A, P0506A, P0610A, P1020A. Aluminum ingots 46000, 46100, 47100. Aluminum ingots 6063. Etc. Product Description : Aluminum is also theoretically 100% recyclable with no loss of its natural properties. It also takes 5% of the energy to recycle scrap aluminum then what is used to produce new aluminum. The most common uses of aluminum include: Aluminum is the third most abundant metal in the Earthâ??s crust, and the third most abundant element overall. No other metal can compare to Aluminum when it comes to its variety of uses. Some uses of aluminum may not be immediately obvious; for example, did you know aluminum is used in the manufacturing of glass? Aluminum popular features: Lightweight �· Strong �· Resistant to corrosion �· Durable �· Ductile �· Malleable �· Conductive �· Odorless Price of product ( USD price or FOB price) : Monthly quantity at least 3.000 MT. Best price over 5.000 MT monthly. Selling price LME Less 20% . Product origin : Russia and Non Russia Key Specifications/Special Features : Aluminum A7/A8 GOST 11069-74 Quality Value demanded by norm GOST 11069-74 A7 A8 Al Min. 99,7% Min. 99,8% Fe Max. 0,16% Max. 0,11% Si Max. 0,15% Max. 0,08% Cu Max. O,01% Max. 0,01% Zn max. 0,05% Max. 0,05% Ti max. 0,02% Max. 0,02% Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
bestscooterstore.com Product Description Sizes S, M, L, XL Colors Chrysocolla/Astral Aura/Chrome Frame Advanced-Grade Composite front and rear triangles, 135mm Maestro suspension, flip chip Fork Fox 36 Factory Live Valve, 150mm, FIT4 damper, Boost 15x110 Kabolt, 44mm offset, custom tuned for Giant Shock Fox Float DPX2 Factory Live Valve, 185/55, custom tuned for Giant Handlebar Giant Contact SLR Trail, composite, 35 Stem Giant Contact SL 35 Seatpost Fox Transfer Factory dropper with Shimano remote, 30.9 Saddle Giant Romero SL, SST rails Pedals N/A Shifters Shimano Deore XT Front Derailleur N/A Rear Derailleur Shimano Deore XTR, Shadow+ Brakes Shimano Deore XT hydraulic 4-piston (F:203mm, R:180mm) Brake Levers Shimano Deore XT Cassette Shimano Deore XT, 12-speed, 10x51 Chain Shimano Deore XT Crankset Shimano Deore XT, 30t with MRP AMG V2 Carbon guide Bottom Bracket Shimano, press fit Rims Giant TRX-1 29 Carbon WheelSystem, 30mm inner Hubs Giant TRX-1 29 WheelSystem, Boost Spokes Giant TRX-1 29 WheelSystem, DBL technology Tires [F] Maxxis Minion DHF, tubeless, 29x2.5, WT, 3C, MaxxTerra, EXO, TR [R] Maxxis Dissector, tubeless, 29x2.4, WT, 3C, MaxxTerra, EXO, TR
