RIT001 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC0.01, Overload Capacity: 200% for 1 minute, Power Supply: DC14.2V to 15.8V, Output Voltage: ±1V, Accuracy: 1%, Linearity: 0.2%, Zero Offset Voltage: ±10mV, Dynamic Response Time: 2ms, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC600A, AC424A, Overload Capacity: DC720A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 3000:1, Secondary Burden Resistance: 2 ~ 5�©, Accuracy: 0.05%, Linearity: 50ppm, Current Change Rate: 100A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC200A, AC141A, Overload Capacity: DC240A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 2000:1, Secondary Burden Resistance: 10 ~ 25, Accuracy: 0.02%, Linearity: 20ppm, Current Change Rate: 200A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-precision digital current sensor provided by Hangzhi for the above equipment plays a key role in the measurement of current in its process control. The digitalized data output reduces the difficulty for customers to collect current signals and greatly reduced the cost of the customers.
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range: ±1500A Output signal: standard 0-10V voltage signal Accuracy: 50ppm (Parts Per Million) Linearity: max 20ppm; Time stability: 0.5ppm/month; Temperature stability: 0.5ppm/K; Frequency Bandwidth (-3dB): 500kHz; Dynamic response time: di/dt=1.5V/us.
AIT600-SG has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Measuring range: ±600A Output signal: analogical current output Accuracy: max 10ppm Linearity: max 2ppm; Time stability: 0.2ppm/month; Temperature stability: 0.1ppm/K; Frequency Bandwidth (-3dB): 500kHz; Dynamic response time: 1uS & 100A/us.
Coir pith is used as combustible fuel in boilers in some countries as the colorific of coir pith is high. Also it is used as an organic fertilizer in horiculture and floriculture as a soil conditioner and substitute for soil.Its water retaining capacity and compressibility besides light weight are the main characteristics which make it wide applicable. Coir pith block is specially designed for commercial nurseries and greenhouses. This soil conditioner is suitable for all types of garden plants, lawns, flowers, orchids, bonsais and vegetables in pots or on the ground. As per buyer requirement
Welding machine, welding equipment, gmaw welding, arc welding, tig welding, mig welding, laser welding, industrial welding, mag welding, mma welding, automatic welding, welding automation.
Coltan(tantalum)cassiterite..Exporter, quality assurance, logistics and shipping including air, sea, and land transport
Rugs, home textile, wooden furniture & textile.
1500VDC PV4.0 Cable Connector Product Specifications: Insulation material: PPE/PA; Safety degree: II; Rated current: 30A; Flame class: UL94-V0; Rated voltage: 1000VDC; Insertion force/Withdrawal force: =50N; Test voltage: 6kV(50Hz,1min); Ambient temperature range: -40~+85; Contact resistance:
Current Sensors, Voltage Sensors, Measurement Instruments..
PV 2 to1 YH Type Cable Harness with inline fuse 1500VDC Product Specifications Insulation material:PPE/TPE/PA Rated voltage:1500VDC Rated Impulse voltage:12KV Test voltage:8kV(50Hz,Imin) Contact resistance: 0.25m Contact material: Copper,Tin plated Degree of protection:IP68(1m,1H) Overvoltage category/Pollution degree:CATIII/2 Regulatory approval:TUV/CE(IEC62852:2014) Safety degree:II Flame class:UL94-V0 Installation type:Outdoor,UV resistant(F1) Ambient temperature range Suitable cable cross sections:1.5~10mm2/16~8AWG Connecting system:Crimp connection
Hr Coils, Cr & Crca Coils, Gi , Gl, Crngo, Ss, Hr Wire Rod, Ppgi/ Ppgl..
Helical screwpiles, brackets, anchors, tie backs, gratings.
SS 304 Welded Pipe..
AC3P Connector II Product Specifications: Insulation material:PPE/PA; Safety degree:II; Rated current:Max.50A(10sqmm); Flame class:UL94-V0; Rated voltage:500V AC; Suitable cable OD Max.:21mm ; Test voltage:4kV; Ambient temperature range:-40~+85(IEC); Typical contact resistance:=1000; Contaction diameter/number of contact:4.0x3; Standard:EN 61984. AC5P Connector II Product Specifications: Insulation material:PPE/PA; Safety degree:II; Rated current:Max.50A(10sqmm); Flame class:UL94-V0; Rated voltage:500V AC; Suitable cable OD Max.:21mm ; Test voltage:4kV; Ambient temperature range:-40~+85(IEC); Typical contact resistance:=1000; Contaction diameter/number of contact:4.0x5; Standard:EN 61984.
4 Rails Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:14A(Diode 25A); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP67;Safety degree:II; Flame Class:UL94-V0;Diode Number:Each 1PC; Ambient temperature range:40 85 (IEC); Upper limiting temperature:110 (IEC); Suitable cable cross sections:2.5-6mm2 (14-10AWG); Range of cable gland(mm):O.D.:4.8-6.2; Ribbons size(mm):6(W) 0.2-0.4(T);Connection of bus ribbons:Clamp.
PV-NEHP01 Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:30A(With diode); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP68(in potting);Safety degree:II; Flame Class:UL94-V0;Ambient temperature range:-40 85 (IEC); Suitable cable cross sections:6mm2 (10AWG);Diode Number:Each 1PC; Upper limiting temperature:110 (IEC);Range of cable gland(mm):O.D.:6.0; Ribbons size(mm):Max.8(W) 0.2-0.5(T);Connection of bus ribbons:Soldering.
Low voltage electrical switchboard, electrical panels up to 8500a, 690v..Production