High Abrasion Cover Hydraulic Hose SAE100 R8 SAE100 R7 thermoplastic hydraulic hose(lines) is suitable for delivering synthetic, petroleum or water-based hydraulic fluids in the working temperature of -40 C to +93 C. Specification: (1)Dash:R8-02 (2)I.D. Inch:1/8 mm:3.3 O.D. mm: 10.2 (3)PSI:5003 SAE100 R8 thermoplastic hydraulic hose is suitable for delivering synthetic, petroleum or water-based hydraulic fluids in the working temperature of -40 C to +93 C. It is non-conductive due to its appropriate materials. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality oil resistant thermoplastic, making the hose widely used in delivering synthetic, petroleum or water-based hydraulic fluids. The reinforcement is made from suitable synthetic fiber and the cover is made from high quality thermoplastic, which is resistant to weather and hydraulic fluids. Recommended for medium pressure hydraulic lines, lubrication, medium pressure gas, and solvent. Construction and agricultural equipment, agricultural brake systems, forklift trucks, articulating and telescopic booms, aerial platforms, scissor lifts, cranes and general hydraulic use. Internal hose: Polyester elastomer Reinforcement: Two braids of synthetic fiber External covering: Polyurethane, black, pinpricked, white ink-jet branding Applicable specs: Exceeds SAE 100 R7 Recommended fluid: Hydraulic fluid ptroleum based, glicol-water based lubricant Operating temperature range: From -40 C to +100C continuous +70C for water based fluids. Thermoplastic hose is often used as a substitute for a rubber hydraulic hose when you a cleaner working environment is required. Thermoplastic hoses also have non conductive covers that are manufactured with rubber. Sinopulse carries a large selection of high quality thermoplastic hoses that work for a wide range of applications including mobile hydraulic machinery, factory equipment, and more.
Carbon Steel Butt Welding Pipe Reducer Carbon steel butt welding reducers are pipe accessories that are typically used to connect two pipes of different diameters. They are usually conical, with one end having a smaller diameter than the other, in order to connect two pipes of different diameters and to change the size of the pipe. Introduction Carbon steel butt welding reducer is made of carbon steel and is connected to the pipeline by welding, which has high strength and excellent corrosion resistance and is widely used in pipeline systems in chemical, petroleum, natural gas, electric power, paper making and other industries. Learn more What is the Carbon Steel Reducer? The pipe reducer is a kind of pipe fitting that joins two pipes of different diameters. The pipe reducers are available in a range of materials depending on the end-use of the products and these fittings are manufactured in inch and metric size. A carbon steel reducer is a kind of carbon steel pipe fitting. The material used is carbon steel, which is used for the connection between two pipes with different diameters. According to the different shapes, it is divided into two types: concentric reducer and eccentric reducer. Concentricity is well understood that the center points of the circles at both ends of the pipe are called concentric reducers on the same straight line, and vice versa is the eccentric reducer. What is the Butt Welding Reducer? The butt welding reducer is a steel hot-pressed or forged reducer, and its connection form is to directly butt weld the steel pipe. Butt welding reducers generally have concentric reducers and eccentric reducers, and the materials are carbon steel, alloy steel and stainless steel. The main manufacturing standards for butt welding reducers are generally GB/T12459, GB/T13401, ASME B16.9, SH3408, SH3409, HG/T21635, HG/T21631, SY/T05010, etc. Applications Oil and gas industry: In the oil and gas industry, reducers are used to connect pipes of different sizes in pipelines that transport crude oil, natural gas, and other petroleum products. Chemical industry: In the chemical industry, reducers are used in piping systems that transport corrosive fluids and gases, such as acids, alkalis, and solvents. Water treatment plants: In water treatment plants, reducers are used in the piping systems that transport water and other liquids. HVAC systems: In heating, ventilation, and air conditioning (HVAC) systems, reducers are used to connect pipes of different sizes in the ductwork that distributes hot or cold air. Food and beverage industry: In the food and beverage industry, reducers are used in piping systems that transport liquids, such as beer, wine, and soft drinks.
GB/T 9711.1-2011 Spiral Steel Pipe for Oil and Natural Gas Transportation Mark & model: Diameter: 219mm~3620mm; WT: 5mm~26mm; Material: L245-L555; (National Standard, also called Petroleum and natural gas industries-Steel pipe for pipelines-Technical delivery conditions-Part 1. Pipes of requirements class A); Used for the transportation of gas, water and oil in petroleum and natural gas industries. Origin: Asia and Pacific Area ; China Quality standard: International Submit date: 2013-06-20 H.S.Classification: Metal Articles ; Articles of Iron or Steel ; 7305 Tubes & pipes nesoi, external diameter > 406.4mm, of iron or steel Xinrisheng wholesale spiral steel pipe, SSAW pipe, spiral submerged arc welding pipe, steel pipe for fluid transportation, hot rolled plate and medium steel plate. The products is strictly tested in all process from contact signing, raw material purchasing, to inspection and after sale service. SSAW DSAW Spiral Welded Steel Pipes Production Technology: ; 1) SSAW Spirally Submerged-Arc Welded Steel pipes 2) DSAW Double Submerged-Arc Welded Steel Pipes Outside Diameter: 219mm~3620mm Wall Thickness: 5mm~26mm Length: 2m~12m Xinrisheng wholesale spiral steel pipe, SSAW pipe, spiral submerged arc welding pipe, steel pipe for fluid transportation, hot rolled plate and medium steel plate. The products is strictly tested in all process from contact signing, raw material purchasing, to inspection and after sale service. Standard: API 5LGr.B,API 5L PSL 1 PSL 2 ; X42,X46,X52,X60,X65,X70,X80 ,ASTM A252 Gr.2,Gr.3,ASTM A53 Gr.BSY/T 5037-2000; SY/T5040-2000; ; GB/T3091-2008: Q235B,Q345B,20#,16Mn;GB/T9711.1-1997; GB/T9711.2-1999: L245~L555;EN10217-1,EN10219-1,EN10224 L235,L275,L355;EN10025 etc. Material: API 5L GR B,Q235,Q345,L245,L290,L360,16Mn,X42,X46,X52,X60,X65, X70,X80,0Cr13,1Cr17,1Cr18Ni9,S235JR,S235JO,S235J2,S275JR,S355JR, S355JO,S355J2,S355K2; DIN 1629 ST37,ST42,ST52 etc.
1.Quick Details Processing:Fermenting Equipment, argon-arc welding Place of Origin:Shandong, China (Mainland) Brand Name:ZunHuang Model Number:ZH-0.1/0.2/0.3/0.5/1.0/2.0 Processing Types:Alcohol Material:Stainless steel Shape:cylinder and cone Heating method:Electricity/gas/steam/LPG 2.Packaging & Delivery Packaging Details:steel frame or exporting standard wooden case Delivery Time:30 days 3.Specifications 1.high technical contents, 2. lower equipment investment, 3.simple process flow, 4.easy operation, 5.high yields 4.Product info The whole beer equipment is consisted of Mash system,Fermentation system,Refrigeration system,Control system and CIP cleaning system. The tank of the system all adopts SUS 304,and the system also have high automatic control capacity. 5.Technical specification Outside surface S.S.304,THK:1.5-4mm Inner surface S.S.304,THK:2mm-4mm Top shape Seal head or conical head Heating method Natural gas/electricity/LPG/direct fire Insulation layer Protected by polyurethane ,THK:80 mm Polishing precision �0.4µm Manhole Side upward Spral ball In the center of the inside tank Agitator Raking system conneted into a top reducer Chimney On the top of the tank Processing Argon-arc welding 6.Benefit analysis:(CNY) The analysis is based on chinese market. Items ZH-0.1 ZH-0.2 ZH-0.3 ZH-0.5 ZH-1.0 ZH-2.0 Malt 20kg�4.5 40kg�4.5 60kg�4.5 100kg�4.5 200kg�4.5 400kg�4.5 Hops 0.06kg�150 0.12kg�150 0.18kg�150 0.3kg�150 0.6kg�150 1.2kg�150 Yeast 0.1kg�1200/5 0.2kg�1200/5 0.3kg�1200/5 0.5kg�1200/5 1kg�1200/5 2kg�1200/5 Water consuming 0.5t�4 1t�4 1.5t�4 2.5t�4 5t�4 10t�4 Power consuming 30kw�1h 50kw�1h 60kw�1h 80kw�1h 150kw�1h 250kw�1h Personal salary 100�1 100�2 100�2 100�3 100�4 100�5 Missing5% 8.5 17 35 60 60 120 Management cost 10 10 20 20 30 30 Material cost 2 74 527 690 1085 1890 3400 Income 100L�15 200L�15 300L�15 500L�15 1000L�15 2000L�15 Tax4.4% 66 132 198 330 660 1320 Day benefit 1160 2341 3612 6085 12450 25280 Year(200days) benefit 232000 468200 722400 1217000 2490000 5056000 A set of good beer equipment not only can make good beer, but also can make good friendship between you and me.
PoA for Public Join Stock Company Oil Company, is the exclusive asian lawful representative/mandate of RN Oil Company - LLC RN-Purneftegaz Group to solicit, facilitate and administer issues regarding promotion, marketing, sales and distribution of ROSNEFT petroleum and petrochemical products, within but not limiting to the asian region. Our seller compay a distinguished player in the field of sustainable business consulting, has strategically ventured into the complex world of crude oil, aligning its c he doommitment to responsible resource management with the exploration of this vital energy source. Crude oil, the lifeblood of the global economy, has become an essential component of we our company seller diverse portfolio. In the realm of crude oil, offers comprehensive consulting services that cater to a broad spectrum of industry needs. Their expertise encompasses everything from exploration and drilling to refining, distribution, and market analysis. As a company committed to ethical and sustainable practices, ensures that their clients in the crude oil industry are well-equipped to navigate the challenges of this dynamic sector. They emphasize responsible extraction methods, safety protocols, and environmental stewardship to minimize the ecological footprint of crude oil operations. Furthermore, provides invaluable insights into market trends, pricing strategies, and risk management, enabling businesses to make informed decisions in an ever-changing global market. By venturing into the world of crude oil consulting, not only diversifies its portfolio but also contributes to the responsible management of this critical energy resource. Their commitment to sustainability, ethical practices, and industry expertise positions them as a trusted partner for businesses operating in the crude oil sector.
A leading company specializing in the procurement of high-quality coal. As a major player in the Indonesian mining industry, We is widely recognized as a top provider of high-quality coal. The high-quality coal offered by we boasts various outstanding characteristics, including a high carbon content, low sulfur content, and optimal combustion properties. These coal products are sourced from the abundant natural resources in Indonesia, which is one of the world's largest coal-producing countries. One of the key strengths of is their commitment to stringent quality standards and sustainable mining practices. The company is dedicated to ensuring that every ton of coal they produce meets rigorous requirements in terms of quality, cleanliness, and performance. Furthermore, we strives to minimize the environmental impact of mining by adopting modern technologies and environmentally friendly practices. With a strong focus on excellent customer service, we has built a solid reputation as a reliable partner in the supply of high-quality coal. They are ready to meet the energy needs of industries, power plants, and various other sectors with a consistent, reliable, and sustainable coal supply. we is the preferred choice for those seeking high-quality coal solutions to support the growth and sustainability of their businesses.
PRESSURE HOSE WITH TEXTILE FRAME GOST 18698-79 GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances. GOST 18698-79 GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances. The industry produces hoses with different inner diameters, which determine the performance of transporting a gas or liquid medium. Main varieties In accordance with GOST 18698-79, reinforced pressure hoses are divided into groups: �? â?? intended for the transportation of petroleum products and motor fuel (gasoline, diesel fuel and kerosene). Permissible temperature of mineral-based oils being pumped is -35...+100, and other liquids -35...+70. Used for transporting technical water without mechanical impurities, aqueous solutions of acids and alkalis (the share of the active substance is not more than 20%). It is possible to work when the flow is heated up to +50. Products are not used for pumping nitric acid, which destroys rubber walls. Intended for transportation of water heated up to +100. PAR 1 and PAR 2 - designed for pumping saturated water vapor at a temperature of +143C and +175C, respectively. Used to supply air with abrasive mechanical particles, for example, in power systems for sandblasting equipment. Pumping of weak aqueous mixtures of alkalis or acids is allowed. The operating temperature is in the range -35...+50. Additional differences In accordance with the GOST 18698-79 standard, the products have 3 versions for different external conditions. The industry offers products for temperate, tropical and cold climates. When selecting products, the temperature of the ambient air (for outdoor installation) and the transported medium are taken into account. The standard provides for the release of hoses that can withstand gas or liquid pressure of 6.3, 10, 16 and 20 atm. The company has a stock of hoses of the main standard sizes. In the absence of the required quantity of products, the delivery time is from 5 to 10 working days, necessary for the production of the required batch of rubber-reinforced hoses. In the absence of the desired item in the catalog, you should submit a request by e-mail or phone to calculate the delivery time and price of rubber products. Rubber hoses Class "(I)" - Gasoline, kerosene, petroleum-based mineral oils Rubber sleeves Class "" - Antistatic gasoline, kerosene, petroleum-based mineral oils Rubber sleeves Class "B(II)" - Industrial water
En590, d2gasoil, d6, mazutm100, liquefied petroleum gaz, espo.
Sintered metal flame arresters are designed to prevent the propagation of flames in gas or vapor handling systems. They are typically composed of a cylindrical housing with a sintered metal element inside. The element is made up of multiple layers of metal powder that are compressed and sintered (heated without melting) to form a porous material with precise pore sizes and distribution. Product parameters Material: stainless steel 304/316L Pore size: 0.2um, 0.5um, 2um, 5um, 10um, 15um, 20um, 40um, 60um, 90um, 100um Technology: Powder Sintering Temperature range: below 600 C Style: customized according to customer needs Features Effective flame arrestation: The porous material of the sintered metal element acts as a filter, allowing gas or vapor to pass through while trapping any flames or sparks. This helps to prevent the risk of fire or explosion in industrial settings where flammable gases or vapors are present. Precise flow control: The pore size and distribution of the sintered metal element can be tailored to control the velocity and direction of gas or vapor flow. This allows for precise flow control, which is important in many industrial applications. Durable and long-lasting: Sintered metal flame arresters are made from high-quality materials that are designed to withstand harsh industrial environments. They are typically very durable and long-lasting, providing reliable flame arrestation for many years. Low maintenance: Sintered metal flame arresters require minimal maintenance, making them a cost-effective solution for many industrial applications. Regular inspections and cleaning can help ensure that the porous element remains free of debris and in good working condition. Application Oil storage tanks are commonly used to store crude oil, refined petroleum products, and other flammable liquids. In order to prevent the risk of fire or explosion, flame arresters are often installed on the vents of these tanks. When the tank is filled or emptied, a mixture of air and flammable vapors is released through the vent. If a flame were to ignite this mixture, it could cause a catastrophic explosion. However, by installing a flame arrester on the vent, the flammable vapors are filtered through the sintered metal element, preventing any flames or sparks from passing through. In addition to storage tanks, sintered metal flame arresters are also commonly used in pipelines that transport crude oil, refined petroleum products, and other flammable gases or vapors. They can be installed at various points along the pipeline to prevent the propagation of flames in the event of a fire or explosion.
Company introduction: As a professional manufacturer of Brewery lines in China. Our business scope includes complete brewery line design consulting & components supply for pub breweries , micro breweries and industrial breweries. We could supply different brewery lines according your special configuration needs or supply components according your requested designed configurations. Due to the competitive cost in designing, manufacturing, training and after sales services, our brewery lines enjoy a good market both at home and abroad. Product description: The whole beer equipment is consisted of Mash system,Fermentation system,Refrigeration system,Control system and CIP cleaning system. The tank of the system all adopts SUS 304,and the system also have high automatic control capacity. Technical specification: Outside surface:S.S.304,THK:1.5-4mm Inner surface:S.S.304,THK:2mm-4mm Top shape: Seal head or conical head Heating method:Natural gas/electricity/LPG/direct fire Insulation layer: Protected by polyurethane ,THK:80 mm Polishing precision: �0.4µm Manhole: Side upward Spral ball: In the center of the inside tank Agitator: Raking system conneted into a top reducer Chimney: On the top of the tank Processing: Argon-arc welding Business Partner Wanted: We are finding business partners all over the world to sell our brewery lines. If you are interested in this brewery industry scope of business in your local place, please contact us for any further information you may need.
The SUS 316L powder sintered small filter element is made of 316L powder pressed through a mold and then sintered at high temperature. It adopts its technology and strictly controls every step of the production process, including powder particle distribution, molding and sintering. It has high mechanical strength, high temperature resistance and corrosion resistance. The SUS 316L powder sintered small filter element has good, uniform pore size distribution, good air permeability, cleanable regeneration, weldable and mechanically processable, etc. By adjusting the powder particle size and process conditions, it is possible to produce porous metal sintered filter elements with a wide range of filtration accuracy. Product parameters Material: 316L, 304 Specifications: OD 8- 37mm Length 10-50mm Accuracy: 1-50 m Temperature resistance: 600 Maximum working pressure difference: 0.6Mpa Application Environment Nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, coal gas, carbon dioxide gas and other environments Product features 1. Good mechanical properties 2. Stable shape 3. Good air permeability 4. Good chemical stability, high temperature resistance, acid and alkali resistance, fire prevention and anti-static 5. High temperature resistance 6. Uniform bubbles, wide range of gas dispersion, no clogging Product applications 1. Catalyst recovery 2. Gas-liquid filtering and separation in the sectors of fermentation for environmental protection, medicine, beverage, food, metallurgy, and petroleum.3. Dust removal, sterilization and oil mist removal for various gases and steam 4. Noise reduction, flame resistance, gas buffer Craftsmanship The first step is to screen high-quality stainless steel 316L powder particles that meet the requirements according to the needs, and then use a custom-made mold for powder molding. After the molding is completed, put the product into a high-temperature vacuum furnace for sintering, and finally take it out for cooling and demoulding, and finally connect the interface by welding or riveting and then put into use. Filtration principle A sintered metal microporous filter element made of stainless steel is used to separate microscopic particles and filter a variety of materials. The interior is hollow and the wall thickness is uniform. The other end is open with one end shut.The material of the cylindrical cylinder wall is made of stainless steel sintered metal microporous material and make the function of filtration and separation.
Introducing the D-1/8G Sintered Brass Air Exhaust Pneumatic Muffler Silencer, a high-performance product designed to address noise-related concerns in various applications. Engineered with precision, this silencer offers exceptional noise reduction capabilities. Constructed from sintered brass, it ensures durability and longevity, making it suitable for demanding environments. With its compact design and easy installation, the D-1/8G Silencer seamlessly integrates into pneumatic systems, effectively controlling air exhaust noise levels. Parameter Material: brass,bronze,copper Size: D-1/8G (can be customized) Item shape: Pagoda Pore size: 40-60 mesh Technique: sintering Features 1.Noise reduction: The D-1/8G silencer is made of efficient sintered brass material, which can effectively absorb and disperse gas exhaust noise, providing a quieter working environment. 2.High durability: This product is made of durable sintered brass material, which has excellent durability and lifespan and can operate stably for a long time in various harsh working environments. 3.Easy installation: The D-1/8G silencer has a compact design and a simple installation process. It can be easily integrated into the pneumatic system without causing major changes or troubles to existing equipment. 4.Accurate airflow control: This silencer provides precise airflow control, helping to optimize pneumatic system performance and ensuring stable and controllable gas emissions. 5.Wide applicability: D-1/8G silencer is compatible with a variety of pneumatic systems and can be adapted to various application scenarios, including industrial fields and other areas that require noise control. Application Instrument field Petroleum Industry Pharmaceutical industry Chemical industry Natural gas industry
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, and machining, etc.. The sintered powder metal filters is widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc. 1. Titanium powder sintered filter elements Porous and sintered uniform structure, high porosity acid and alkali corrosion resistance, high temperature resistance to 600 filtration precision is 0.22-100um 2. Stainless steel powder sintered filter elements  porous and sintered stainless steel 316L powder high temperature resistance to 300 acid and alkali resistance easy to clean and replace 3. Copper powder sintered filter elements  Material: copper powder Shape: sheet, tube, cup, plate, etc. Filtration precision: 3.0-90 m precise pore size, uniform distribution Applications 1. Filtration/Separation of Liquid and Gas 2. Spargers Examples of Uses for Sparging Carbonization of Soda Carbonization of beer Stripping of Edible Oils from Oxygen 3. Breathing Ports 4. Sensor protection 5.(Throttling/Dampening) Flow Control 6. Exhaust mufflers 7. Pressure/Flow Equalization
Titanium mesh (titanium plate stretched mesh) is also called titanium rhombus mesh. Using the most recent technology, it is constructed from the original steel plate by cutting and extending. Its mesh body is more lightweight and capable of supporting more weight. Due to the difficulty in drawing titanium wires, the thinnest titanium wires that are relatively skilled in drawing can reach 0.1mm. Titanium wires have low elongation, high strength, high elasticity, and low flexibility. The chemical liquid filter made of titanium mesh can withstand the test of high temperature and high humidity. Titanium mesh can be used to manufacture demister mesh, demister, titanium mesh packing, filter mesh, and titanium filter cartridge and filter column can be manufactured by combined welding. Titanium mesh is primarily utilized for gas, liquid, and other media separation as well as screening and filtration in environments with acid and alkali. Product parameters Material: titanium plate Hole type: rhombus, hexagon, etc. according to customer requirements Plate thickness: 0.1-10mm Mesh: 0.5*112 36485*1010*2020*5025*5030*6040*80 50*100 customized Size: According to customer requirements Features It has no rust, beautiful color, gorgeous color, beautiful appearance, strong and durable, high quality, high-grade High characteristics, smooth mesh surface, uniform mesh, titanium mesh produced by machining, the shape of the hole is diamond-shaped hole, large opening rate, large surface area, high strength Applications As a mud net in the petroleum industry, as a sieve filter, for electroplating in the chemical fiber industry, and in the mining, petroleum, chemical, food, pharmaceutical, machinery manufacturing, and other industries, it is used for screening and filtering under acidic and alkaline environmental conditions. Introduction to related terms Short Pitch: The distance between the node centers along the short diamond diagonal. Long Pitch: The distance between the node centers along the long rhombus diagonal.Wire stem width: The side stem width of the diamond-shaped hole in the expanded metal mesh is the length of the metal plate used to make a wire stem. Plate thickness: the thickness of the original steel plate.
Stainless Steel Seamless And Welded Pipes/tubes : Specification astm a312 astm a358 Standard - seamless erw efw Grades - 304, 304l, 316 , 316l, duplex grades Diameter: 1/8nb 24 nb Thickness: sch 5s sch xxs Length: single (5-7 meters), double (11-13 meters), random Price of product ( usd price or fob price):to be discussed Product origin :jindal and import from various mills all over the world Specifications : Our own selection can be substantially utilized in numerous industrial applications which have been the following: Chemical treatment equipment Chemicals tanks Architectural Kitchen equipment Exterior automotive molding and trims Micrometer parts, caps and vaporizer in petroleum fractionating towers Lining for reaction chambers Decorative applications Aircraft exhaust manifolds Metal fixtures for construction purposes Roof drainage products Expansion joints Furnace parts Heating element tubing Storm door frames Tableware Heat exchangers Household appliances Metal molding Air heaters Boiler baffle plates Carbonizing boxes Chemical processing equipment Dryers Exhaust manifolds Metal trim Cabinet hardware Hinges Furnace parts Gas turbine parts Jet engine parts Oils burner parts Oven equipment Petroleum refining equipment Minimum order size and packaging details :minimum order 1mt
Stainless steel fittings : Butt-weld: elbow, tee, reducer, cross, cap, stub-end Socket-weld: elbow, tee, cross, cap, coupling threaded: elbow, tee, cross, cap, coupling, plug, union outlet: welded outlet, socket-weld outlet, elbow outlet, threaded outlet, niple outlet, latral outlet, sweep outlet grades - 304, 304l, 316 Specification - astm a182 Sizes: b16.5: 1/2 24 B16.47 series a (mss sp 44):28 60 B16.47 series b (api 605): 2 60 B16.36: 14 pressure class (lbs): b16.5: 150, 300, 400, 600, 900, 1500, 2500 B16.47 series a (mss sp 44): 150, 300, 400, 600, 900 B16.47 series b (api 605): 75, 150, 300, 400, 600, 900 B16.36: 300, 400, 600, 900, 1500, 2500 Bs en 1092: pn6, pn10, pn16, pn25, pn40, pn64, pn100 Price of product ( USD price or FOB price):To be discussed Product origin :Jindal and Import from various mills all over the world Specifications : Our own selection can be substantially utilized in numerous industrial applications which have been the following: Chemical treatment equipment Chemicals tanks Architectural Kitchen equipment Exterior automotive molding and trims Micrometer parts, caps and vaporizer in petroleum fractionating towers Lining for reaction chambers Decorative applications Aircraft exhaust manifolds Metal fixtures for construction purposes Roof drainage products Expansion joints Furnace parts Heating element tubing Storm door frames Tableware Heat exchangers Household appliances Metal molding Air heaters Boiler baffle plates Carbonizing boxes Chemical processing equipment Dryers Exhaust manifolds Metal trim Cabinet hardware Hinges Furnace parts Gas turbine parts Jet engine parts Oils burner parts Oven equipment Petroleum refining equipment Minimum Order Size and Packaging details :Minimum order 1Mt
Stainless steel flanges : Forged: blind, slip-on, welding neck, socket-weld, lap joint, threaded, orifice, spectacle plate: blind, slip-on, lap joint, spectacle face types: flat faced (ff), raised faced (rf), ring type joint (rtj) grades - 304, 304l, 316 , 316l specification - astm a186 Sizes: b16.5: 1/2 24 B16.47 series a (mss sp 44): 2 60 pressure class (lbs): b16.5: 150, 300, 400, 600, 900, 1500, 2500 B16.47 series a (mss sp 44): 150, 300, 400, 600, 900 B16.47 series b (api 605): 75, 150, 300, 400, 600, 900 B16.36: 300, 400, 600, 900, 1500, 2500 Bs en 1092: pn6, pn10, pn16, pn25, pn40, pn64, pn100 B16.47 series b (api 605): 26 60 B16.36:1 & 24 Price of product ( USD price or FOB price):To be discussed Product origin :Jindal and Import from various mills all over the world Specifications : Our own selection can be substantially utilized in numerous industrial applications which have been the following: Chemical treatment equipment Chemicals tanks Architectural Kitchen equipment Exterior automotive molding and trims Micrometer parts, caps and vaporizer in petroleum fractionating towers Lining for reaction chambers Decorative applications Aircraft exhaust manifolds Metal fixtures for construction purposes Roof drainage products Expansion joints Furnace parts Heating element tubing Storm door frames Tableware Heat exchangers Household appliances Metal molding Air heaters Boiler baffle plates Carbonizing boxes Chemical processing equipment Dryers Exhaust manifolds Metal trim Cabinet hardware Hinges Furnace parts Gas turbine parts Jet engine parts Oils burner parts Oven equipment Petroleum refining equipment Minimum Order Size and Packaging details :Minimum order 1Mt
Stainless Steel Plate/sheet : Type - hot rolled and cold rolled Standard - astm / asme sa 240 Grades - 304, 304l, 304h, 309s, 309h, 310s, 310h, 316 , 316h, 316l, 316 ti, 317, 321, 321h, 347, 347 h, 409, 410, 410s, 430, 441 Width: 1000mm to 2500mm Thickness: 0.3mm to 30mm Price of product ( usd price or fob price): to be discussed Product origin :jindal and import from various mills all over the world Specifications : Our own selection can be substantially utilized in numerous industrial applications which have been the following: Chemical treatment equipment Chemicals tanks Architectural Kitchen equipment Exterior automotive molding and trims Micrometer parts, caps and vaporizer in petroleum fractionating towers Lining for reaction chambers Decorative applications Aircraft exhaust manifolds Metal fixtures for construction purposes Roof drainage products Expansion joints Furnace parts Heating element tubing Storm door frames Tableware Heat exchangers Household appliances Metal molding Air heaters Boiler baffle plates Carbonizing boxes Chemical processing equipment Dryers Exhaust manifolds Metal trim Cabinet hardware Hinges Furnace parts Gas turbine parts Jet engine parts Oils burner parts Oven equipment Petroleum refining equipment Minimum order size and packaging details :minimum order 1mt
Stainless Steel Coils : Type - hot rolled and cold rolled Standard - astm / asme sa 240 Grades - 304, 304l, 304h, 309s, 309h, 310s, 310h, 316 , 316h, 316l, 316 ti, 317, 321, 321h, 347, 347 h, 409, 410, 410s, 430, 441 Width: 600mm to 1500mm Thickness: 0.3mm to 10mm Price of product ( usd price or fob price) : to be discussed Product origin : jindal and import from various mills all over the world Our own selection can be substantially utilized in numerous industrial applications which have been the following: Chemical treatment equipment Chemicals tanks Architectural Kitchen equipment Exterior automotive molding and trims Micrometer parts, caps and vaporizer in petroleum fractionating towers Lining for reaction chambers Decorative applications Aircraft exhaust manifolds Metal fixtures for construction purposes Roof drainage products Expansion joints Furnace parts Heating element tubing Storm door frames Tableware Heat exchangers Household appliances Metal molding Air heaters Boiler baffle plates Carbonizing boxes Chemical processing equipment Dryers Exhaust manifolds Metal trim Cabinet hardware Hinges Furnace parts Gas turbine parts Jet engine parts Oils burner parts Oven equipment Petroleum refining equipment. Minimum order size and packaging details : minimum order 1mt
Johnson strainer Grade: SUS201,SUS304,SUS316, Duplex2205, 2507, 3507, SUS906Stainless steel tube Size: 1.050" to 4"1/2 Stainless steel casing size: 4"1/2 to 20"The thickness for the tube:2.87mm to 16mmThe thickness for the casing:5.21mm to 20.24mm Standard: API 5CT, ASTM A312, API 5L Certification: ISO9001, SGS, CTI, ROHS, BV,DIN, GB, JIS, BA, ANSIThe threads type: STCLength:up to 6m (or according to clients' requests)Application:water/oil filter, oil wells, water wells, gas well, the chemical factories using Technique:Polishing&Wire wrapped&Welding Characteristics of Johnson strainerThe characteristics of the wire and rods:The welded stainless steel water well screen is made up of rods and wires. The rods can be round, triangular and trapezoid wire. The wire is triangular wire we also called v-shaped wire. The characteristics of the slot:the structure of the water well screen with high open area, as well as accurate dimension. Other characteristics of the water well screens: heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Use area of Johnson strainerThe strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters.Johnson screeScreen Size(in)Inside Diameter (in)Outside Diameter(in)OD of Female Threads End (in)2225/823/43335/833/44445/843/45555/853/46665/878885/891/41010103/4113/81212123/4133/814131/814??161516??2018 3/420??
