Seamless titanium tube and pipe .
Material: Grade1, Grade 2, Grade 3, Grade 7, Grade9,Grade12,Ti-3Al-2.5V Deliver condition & available size: Cold rolled /cold drawn seamless tube: size: íT3.0mm x 0.3mm(í¦0.3mm)---íT108mm length: í_14000mm Mechanical tube: wall size(as customer's request) length: 2000mm max Standard: As per ASTM B337, ASTM B338, ASTM B861 etc. standard packing
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
SML tube OD:3-114mm / 0.12-4.5; Wall thickness:0.2-9mm; Welded tube: OD:4-914mm/0.16-36; Wall thickness:0.4-30mm; Length: 100-6000mm Grade: GR1,GR2,GR7,GR9,GR5,GR12. Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
OD:20-114mm/0.78-4.5 Wall thickness:1.65-4mm; Length:500-3000mm. Grade:Gr1,GR2,GR5,GR9,GR7,GR12 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 100 Kg
Titanium and Titanium alloy tubes/pipes Titanium tube/pipe for chemical industry Designation: TA0,TA1,TA2,TA9,TA10 Size(mm) : rolling seamless tubes ¡é(3-114)*(0.2-0.6)*L ÎÞ·ì¹Ü Welded tubes ¡é(10-40)*(0.5-2.0)*L º¸½Ó¹Ü Extrusion tubes ¡é(25-210)*(6.0-30)*L ¼·³ö¹Ü State: M Standard: GB/T 3624-2007;GB/T 3625-2007 îÑ»»ÈÈ¹Ü Titanium heat exchanger tube/pipe Designation: Gr1,Gr2,Gr3,Gr7,Gr9,Gr12 OD: 5-128MM; WT: 0.5-10MM; Length: less than 16 meters Seamless tube( ½Ó·ì¹Ü) Standard: ASTM B338£»ASME B338 Titanium capillary pipes Material: GR1,GR2,GR3 Spec.(mm): OD(6-15)*WT(0.3-2)*(2000-2500).
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Our Product Anatase TiO2 is called "OpaTi" as Brand name and it has several grades for different Applications. It has Paint, Plastics, Masterbatches, Rubber, Textiles, Paper, PVC & Cosmetics grades. Our State of the art Plant is located in Southern Province in India and Supply Quality Products to Various Domestic & Overseas Customers. Our Company is ISO 9001, 14001 & 18001 Certified and presence for more than 3 decades.
Size Outside diameter 2 to 800mm, wall thickness 1mm to 220mm, Length 1 meter to 6 meter. All sizes can be according to customer's requirements. Hardness 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. Surface Polished,bright,oiled,hair line,brush,mirror,or as required Export to Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA, Brazil,Thailand,Korea,Italy,India,Egypt,Oman,Malaysia,Kuwait,Canada, Viet Nam, Peru Package Plastic film with Wooden case or wooden pallet Delivery time Prompt delivery or upon your order quantity. MOQ Negotiable Quality Control Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. Application widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair rail. Also can be made according to your required. Shape Round, Square, Flat, Hexagon, Oval
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings : Titanium Elbow (45�°, 90�°, 180�°) Titanium Reducer (Concentric, Eccentric). Titanium Tee (Straight, Reducing). Also stub ends, caps, flanges etc. Standard: ASME B16.5, ASME B16.9, ASME 16.11
ASTM Tubes, SS Tubes, 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760), High Nickel Alloy Tubes, supplier. TYPE : SEAMLESS / ERW / EFW / WELDED / CDW RANGE : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness. FORM : ROUND, SQUARE, RECTANGULAR, COIL, \'U\' SHAP, PAN CAKE. LENGTH : SINGLE RANDOM, DOUBLE RANDOM & REQUIRED LENGTH ENDS : PLAIN END, BEVELLED END, TREADED OTHER : â?¢ HYDRAULIC TUBE â?¢ CAPILLARY TUBE â?¢ HORN TUBE â?¢ BOILER TUBE â?¢ IBR TUBE â?¢ PRECISION TUBE Stainless Steel Tube : Standard� : ASTM / ASME A/SA 269 / 213 / 249 Grade� : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Duplex & Super Duplex Steel Tube : Standard� : ASTM / ASME A/SA 240 / 790 / 815 / 928 Grade� : 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760) Aluminium Tubes : Standard� : ASTM B 241 Grade� : 2024, 6061, 6063, 6082 & 7075 Titanium Tubes : Standard� : ASTM B 338/ASME SB 338 /ASTM B 337/ASME SB 337 /ASTM B 861/ASTM B 862 Grade� : Gr1,Gr2,Gr3,Gr7,G9,Gr11, Gr12,Gr16,Gr17 Carbon Steel tubes : ASTM / SA 179 / A 210 GR.A / BS 3059 GR.360 & 440 Alloy Steel Tube : Standard� : ASTM / ASME A/SA 213 Grade� : T1, T5, T9, T11, T12, T22, T91 Copper Alloy Tube : â?¢ Copper Tube : Electrolytic / Dioxide â?¢ Copper Nickel Tube / Cupro Nickel Tube :ASTM / ASME SB 111 UNS NO. C 70600 ( CU -NI- 90/10) / C 71500 ( � � � CU -NI- 70/30) / C 71640 ( CU-NI-66/30/2/2) â?¢Admiralty Brass Tube : ASTM / ASME SB 111 UNS NO. C 44300 ( ALLOY 443) â?¢Aluminium Brass Tube : ASTM / ASME SB 111 UNS NO. C 68700 ( ALLOY 687) TEST CERTIFICATE : Mill Test Certificate as per EN 10204 / 3.1 Types Of Tubes â?¢ SS 310 / 310S SEAMLESS Tubes â?¢ Duplex Steel UNS S31803 Tubes â?¢ Stainless Steel 304 / 304L Tubes â?¢ Duplex Steel SEAMLESS Tubes â?¢ Stainless Steel 316 / 316L ERW Tubes â?¢ Duplex Steel UNS S32205 Tubes â?¢ Stailess Steel 321 / 321H Tubes â?¢ Super Duplex UNS S32750 Tubes â?¢ Monel 400 EFW Tubes â?¢ Hastelloy C276 ERW Tubes â?¢ SS Tubes â?¢ Steel Tubes â?¢ Inconel 625 WELDED Tubes â?¢ Alloy 20 EFW Tubes â?¢ Cu-Ni 70/30 (C71500) Tubes â?¢ Cu-Ni 90/10 (C70600) Tubes â?¢ ASTM A105 Tubes â?¢ ASTM A350 LF2 / LF3 Tubes â?¢ Inconel 600 SEAMLESS Tubes â?¢ Hastelloy B2 Tubes â?¢ SS 317 / 317L Tubes â?¢ Super Duplex WELDED Tubes â?¢ SS 347 ERW Tubes â?¢ Super Duplex UNS S32950 Tubes â?¢ Monel K500 Tubes â?¢ Hastelloy C22 SEAMLESS Tubes â?¢ Stainless Steel 446 Tubes â?¢ ANSI Tubes â?¢ Inconel 718 EFW Tubes â?¢ 904L Tubes â?¢ Incoloy 800 Tubes â?¢ Titanium Gr 2 Tubes â?
Titanium seamless tube, Titanium tube, Titanium pipe, Titanium tubing, Titanium alloy tube CDM Titanium produce titanium seamless tube to world-wide clients, who specializing in process equipment such as heat exchanger, also for power generation, thermal, and oil and gas exploration etc. Grade: GR1 GR2 GR3 GR7 GR9 GR12 GR16 GR17. Size (mm): OD1.5~ 620, Wall Thickness: 0.4 ~ 20, Maximum length: 18000mm. Standard: ASTM B338, ASME SB338, ASTM B861, DIN17861 etc. Titanium welded tube, Titanium coil tube CDM titanium welded tubes are processed from titanium coil, and longitudinally welded by TIG process without metal filler, so it guarantees the homogeneity of the welded area. Grade: GR1, GR2, Size(mm): OD(8-102)×WT(0.5-1.2)×L, at random Length, coil tube, U-Tube. Standard: ASTM B338 , ASME SB338. EMAIL: cdm at cdmtitan dot com Grade: GR1, GR2, GR7,GR12 etc. Size(mm): OD(114-1220)×WT(2.1-12.7)×L, manual welded from titanium plate. Standard: ASME SB862. Titanium pipe fittings,Titanium elbow,Titanium reducer ,Titanium tee,Titanium stub end,Titanium cap,Titanium outlet We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings : Titanium Elbow (45°, 90°, 180°) Titanium Reducer (Concentric, Eccentric). Titanium Tee (Straight, Reducing). Also stub ends, caps, flanges etc. Standard: ASME B16.5, ASME B16.9, ASME 16.11
Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.
We Titubes stock and supply titanium tubes rings bars and sheets since 2010. Now we're producing the special Huge Gr.2 Titanium Seamless tubes which can be reached as O.D600*W.T5*L4000mm according ASTM B338. It's Seamless and Huge.
Item name Grade2 titanium welded / seamless tube Standard Astm b337, astm b338, astm b861, astm b862 Grade Grade2, gr5 Length Custom-made size available Application Chemical processing, oil and chemicals, medical industry etc Packaging Plywood cases lined with foam or as per clients' requirements Plywood case lined with foam
Grade: Gr1 Gr2 Gr5 Gr7 Gr12 Standard: GB/T3624-1995, GB/T3625-1995 ASTM B337 ASTM B338 ASTM B861 ASTM B862 The way of processing: cold rolling, welding, annealed condition Size:5~10X1.0~.5X2000~1000Cold rolling, seamless 110X1.0~8X1000~2000 (Welding).
Above titanium pipe can be supplied according to ASTM B337, ASTM B861, ASME SB337, ASME SB861 standard. Titanium and Titanium Alloy Products have the advantages of light, high strength, good resistance to temperature and erosion, etc. Grade: Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr9 GR11 GR12 GR16 GR17 The sizes of titanium pipes are available upon your design and drawing. Wooden Case.
