The T355 is a Magnetic GPS Tracker. It is mainly used to track goods, valuables, equipment, and other assets. Features Power magnet, free of installation Two internal magnets make the tracker attached to the vehicle body and free of installation. If the tracker drops, a drop alarm will be generated. Long standby time Over 365 days, 7400 mAh battery capacity IP66 water resistant No worry about being got wet in the rain or spilled by water Rugged design/shockproof The device adpots the ABS cover which is equipped with high intensty and fine ductile, ensuring that it is water resistant, dustproof, shockproof, and durable. REPORT AN SMS WITH A GOOGLE MAPS LINK GPS/GSM (LBS) TRACKING Not only report latitude and longitude, but also a link for quick access to Google maps on your smart phone. The dual tracking mode helps you track by GSM station when no GPS signal is available. Monitor and manage the vehicle by historical report. MEITRACK FAMILY GPS TRACKING SYSTEM MS02 GPS/GSM (LBS) tracking Dynamic I/O status display Polygon geo-fence Group command sending Route deviation alarm Map: OSM, Google, Bing, MapABC More Functions Tracking Track on demand, track by time interval/distance Alarm Drop alarm,geo-fence alarm, GPS blind spot, low battery, speeding, GPS antenna disconnect Specifications Item Parameter Specifications Outer case Dimension105 *75*45 mm Material ABS Water resistance IP66 Power consumption Working voltage 3.7 V Average current 50 mA Standby current 0.7 mA Internal battery 7400 mAh/3.7 V Working hour Consecutive working Hours: >120 hoursStandby time: > 8760 hours GSM Frequency band 850/900/1800/1900 MHz Network GSM/GPRS Antenna Internal antenna GPS Speed0.1 m/s Tracking sensitivity-162 dBm Positioning timeCold start < 42s, hot start < 3s, recapture time < 2s Positioning accuracy10m, 2D RMS Satellite receiving channel56 channels Antenna Internal/External antenna Ambient environment Operating temperature -15°C to 65°C Storage temperature -25°C to 70°C Humidity 5%–95% non-condensing Weight 322g Sensor Internal acceleration sensor (used to determine movement, vibration and non-movement.) Memory 8 MB flash (8,192 GPRS caches and 100 SMS caches) Indicator Indicators showing Power, GPS, and GSM status Package Box Size:189x150x96mm(L x W x H) G/W:0.8kg per box CartonSize: 320X510X230mm (L x W x H) (10 sets) 400X330X510mm (L x W x H) (20 sets)
Scrubbers, incinerators, boiler fume, waste recovery & recovery systems, noise abatement systems, vacuum conveying systems, evaporate cooling systems, ventilation systems, electrostatic precipitators, dust extraction system.Environmental pollution control consultancy, designs
Heat treatment furnaces & waste incineration system.
We are the manufacturer and supplier of thermic fluid heater. Features: Thermic fluid heater temp : 30000 c. Standard model, 35000 c high temperature models & 40000 c vapour design. Capacity : 30000 kcal/hr to 9 million kcal/hr. Fuel : wood, coal, lignite, diesel, ldo, fo, bio-mass, husk, biogas, pet-coke fired, agro waste, electrical thermic fluid heater.
Incinerator To dispose off hospital waste, industrial waste with emission treatment systems Electrically operated as well as oil fired incinerators Capacity ranging from 3 kg/hour to 1 ton/hour
Incinerator, flue gas treatment system, crematorium waste to energy, waste sorting plant.
Boilers, thermic fluid heaters, hot water boilers, hot air generators, furnaces, burners, incinerators, customized drying systems, heat recovery system.
Flow plates, valve cluster, control panel, material hoist, tank, sewerage treatment plant, waste water plant, stainless steel enclosures, tubular heat exchangers, hot water unit, milk heater/cooler, pasteurizer, pressure vessel, pumping systems..Engineering design, factory automation, process automation, plant installation
Medical simulation trainers & devise, sterilized needle and cannula, opa disinfectant, oxygen supplying system, CPR & AED, medical furniture & appliance, glove port, medical infectious waste incineration.Manufacturer & exporter, trader
Product Application Semi-Automatic PET Bottle Recycling Plant is suitable for recycling waste PET bottle bales to clean PET flakes. It is widely used to recycle big capacity and stable quality raw material, especially for PSF manufacturer and recycled POY manufacturer with big capacity. The Process Flowchart:( Process flowchart based on end product requirement) Label Scrapping------ Label Separation-------- Manual Sorting and Metal Detecting-----Wet Grinding------- Gravity Separation------- Hot-washing -------Rinsing-------- Drying-------- Plastic Removing System------ Packing
Honeycomb ceramic Trend aofu honeycomb ceramic has excellent properties as low coefficient of thermal expansion, high specific surface area, great thermal stability, resistance to acid and alkali etc, which are applicable to extensive industrial process. Trend series of new material honeycomb ceramic products take the key part in environment protecting industry, which includes industrial exhaust gas, waste water, incinerators, rto, rco etc. At the same time, it is the optimal material of heat exchanger, gas stove etc. Trend exported honeycomb ceramic to many countries such as usa, japan, german, korea, indiaíasingapore etc. And all get the excellent performance. Application: Heat storage and exchange system in metallurgy, chemical industry, construction material. Industrial waste gases treatment Nox reduction system for flue gas in electricity plant. Exhaust cleaning system of waste incinerators. Noxious gas purifying in chemical industry and mining. Extruded ceramic filter for foundry industry. Catalyst supports. Catalytic converter substrate. Column packing in chemical industry. Material: Mullite, cordierite, alumina, zirconia, aluminium titanate, silicon carbide, titania, spodumene, stoneware and so on. Shape of holes Square, circle, rectangle, triangle, rhombus, hexagon.
Products Petroleum Oil Refining EquipmentAtmospheric Distillation Column And Vacuum Distillation UnitAsphalt Oxidation UnitUsed Oil Re-refining PlantVessel Type Waste Motor Oil Recycling PlantColumn Type Furfural Treatment Used Oil Re-refining EquipmentShort Path Evaporation Car Engine Oil Regeneration UnitUsed Motor Oil Cracking Process For Diesel Production Waste Tyre And Plastic Cracking For Pyrolysis Oil Steel Structures And Oil StationLaboratory Testing Equipment For RefineryDe-sufurization TowersPetrochemical Industry Related EquipmentPetroleum Transportation Wagons Oil Tanks ConstructionOur Supplies Inquiry Basket 0 item in basket Online Service skype Contact Us Tel: 0086-138-966-84003 Fax: 0086-23-68418554 Mail: info@engineeringoil.com Web: www.engineeringoil.com Vacuum residue after heat exchanged with feedstock oil, it enters in to oxidation tower. As air is blowing from the bottom of oxidation tower, vacuum residue in the tower is oxidizing reacting with air. Fresh water is sprayed from the top of oxidation tower to control the temperature of gaseous phase temperature not higher than 160 c. Tail gas from the top of oxidation tower will flow in to a saturator, tail gas contact with water and cooled down to have the dirty oil separated away from gas. The residual gas discharged from the top of saturator will flow in to water sealed tank. And residual gas discharged from the top of water sealed tank will be sent to residual gas incinerator, which will be discharged to air after burnt in a incinerator. The heat energy produced from tail gas can be used for heating up of the feedstock oil before entering in to vacuum tower. The dirty oil discharged from saturator will flow in to residual oil tank, and then pumped out of unit periodically. Circulating diesel is pumped in to asphalt-diesel heat exchanger through diesel circulating pump to make its temperature increased from 65c to 140c. The hot diesel will be cooled through diesel cooler with circulating water to have it down to 65c. The cooled diesel will be sent back to diesel circulating tank. Compressed gas from the system pipe lines enters in to bottom of oxidation tower. Saturator, residual oil tank, diesel tank are in the same case. The degree of asphalt from 60-120 is controlled by the vacuum distillation extraction level, oxidation duration and air blowing quantity.
Kansan provides complete and compact wet wipe system solutions; in addition to flat pack and cross fold wet wipe converting machines, we also manufacture wet wipe packaging machines and lid applicators. As an internationally proven integrated wet wipe production line manufacturer, kansan offers: • efficiency and high speed • fully automatic and flexible operations • less manpower and product waste • less maintenance • easy and quick change-over • advanced level of safety and hygiene
Hi we are Ecocreation the manufacturing company in korea. We produce high quality pyrolysis plant. All the manufacturing process is held in Korea by Korean technicians. Here are some features of our Pyrolysis Plant. 1. Technology of converting waste plastics into Renewable energy 2. Superlative technology using proprietary catalyst control 3. Production of high quality oil for use in engines from waste plastics 4. Fundamental solution for social issues caused by abandoned waste plastics 5. No secondary pollutant source such as incinerator, SRF, and greenhouse reduction effect 6. FLASH POINT CONDermaTROL Due to the nature of the flash point, which is required differently depending on each field and application, we have installed a system that can control the flash point and produce oil with a flash point between 30 and 60 degrees. 7. SEPARATION OF NAPHTHA Ecocreation uses a principle of fractional distillation to extract high quality and high purity and stable oil by introducing a system that separates high-volatility gas which is naphtha. SPECIFICATION OF OUR ECOPLANT 40 cubic meters of capacity, batch type operation Dewaxing technology Safe and stable operation Emergency shut down system App. 45-90% yeild Three-Phases (220V or 380V) produced oil : diesel fraction Input material : waste plastic
Main products :Filter press, Filter plates, Centrifuge ;Types : programmed filter press, hydraulic filter press, mechanical and manual series filter press; Models : 200,320,450,630,800,1000,1250,1500, ¦Õ800¡¢¦Õ1000 and SS Centrifuge SGZ Centrifuge. Filtration plate and filter press accessories are also available in our company. The advantages of our products: Automatic, program-controlled, high efficiency, energy saving, environmental protection, low operating cost, well adaptability. Area of appliance Waste Water Treatment 1.Municipal sewage works 2.Industrial purification plants 3.Petrochemicals 4.Industrial acid waste neutralisation 5.Liquid chemical waste 6.Soil decontamination 7.Excavation (tunnelling) 8.Liquid electroplating waste 9.Waste water from refuse and 10.special waste incineration plants Foodstuffs 1.Sugar 2.Cooking oils and fats 3.Beer 4.Wine 5.Yeast (for baking and brewing) 6.Pectin Pharmaceuticals / Biotechnology 1.Agar-agar 2.Blood plasma 3.Various intermediate pharmaceuticals 4.Algae Mining 1.Coal 2.Gravel quarries 3.Ore extraction Chemicals 1.Pigments 2.Dyes 3.Titanium dioxide 4.Silica 5.Catalysts 6.Various intermediate products Metallurgy 1.Lead Pb, copper Cu, zinc Zn, tin Sn, manganese Mn, nickel Ni refinement Refinement of various non-ferrous metals 2.Precious metal refinement (Ag, Au, Pt, Pd) 3.Liquid electroplating waste 4.¡±Washer water¡± from blast furnaces Seaworthy packaging with wooden.
High-temperature Burner-Superflame HB Series Superflame Burner Superflame burner is an industrial application burner designed by Rapidflame for high temperature. It is widely used in the waste incinerator (RTO/TO) , thermal treatment furnace, non-ferrous metal smelting furnace, tunnel furnace, calcinator, hot air furnace, drying furnace, cracking furnace, etc. Product Features It applies to the furnace for which the maximum temperature is 1600ºC;High heat transmission efficiency, even furnace temperature;It applies to the working conditions under which high temperature and low temperature can be changed flexibly;The fuel or air volume can be adjusted flexibly so as to meet requirements under all kinds of working conditions;Low CO and NOX discharge; The regulating ratio of the burner can reach 40:1;Six models with different powers can be selected.
Mineral water bottling plant, fruit juice processing & packaging plant, carbonated soft drink plant, hot fill pulp base juice plant (mango, apple, guava, pineapple, orange, litchi), RO plant, waste water treatment plant, reverse osmosis systems for process and drinking, water purification plants.
TH-2004D-300ML Benchtop dispensing robot for Hot melt adhesive glue Patent Numberï¼?ZL 2010 2 0120765.6 FEATURES 1.Feed system of hot melt heating tank.,avoid frequent add glue,Good for granular and striped solid hot glue. 2.Precision heating Valve is Precision suck back valve, close glue quickly,ensures no dripping 3.High precision liquid controller system. Application: Good for hot melt spraying and coating on clothes and carve cards,Diaper wet. Liquid Material: hot melt glue,hot melt adhesive. Packing capacity:granular hot melt adhesive and striped solid hot glue. Specification : ITEM TH-2004D-300ML X/Y/Zworking range 300 x 300 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 Weight 34kg Standard CE Approved XY/ZMaximum Load 10 kg / 3 kg XY/Z Speed 800/350 mm/Axis Data memory capacity 9999programs Display way LCD display Drive System Precision micro-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation) Help you more : · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste
The charcoal kiln UMT-3 The charcoal kiln UMT-3 has all the unique qualities installations series "UMT". But in this model we have provided not only enhanced protection from the so-called "human factor", but also we have developed an automatic protection that works completely offline. It allows to reduce in several times the risk of equipment damage from negligence of employees and increase productivity by 10-15% . Now the minimum capacity of this charcoal kiln is 35 tons per month using wet wood till 50 tons per month using dry wood. Also its possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes The productivity of the briquette is 100-120 tons / month 1.Improved installation design. 2.Increased productivity from 35 tons per moth for charcoal and 100-120 tons per month per briquettes 3.Automatic protection from extreme temperatures, works completely offline. 4.The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to charcoal is 5.1m3 per 1 ton of charcoal 5.Low operating costs. The equipment serves one person whether it is a single installation, two or three. 6.Works on its own gas. Power consumption is 20 W/hour, 24V/hour 7.Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5 minutes 8. Mobility. Charcoal kilns can be moved if its necessary. 9.Work without repairs. We give a guarantee for two years 10.Environmental cleanliness. No emissions into the atmosphere either before or after or during the production process 11.Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste incineration. 12.Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per year, the price of charcoal kiln is the lowest in the world market. Two years of operation have confirmed the reliability of our equipment Parameters Width -depth ?height 5680x2600x2690 mm Weight 8500 kg Productivity 30-55 tons per month Guarantee 24 months Terms of manufacturing 45 workdays
Rotary dryer, drum dryer-flaker, tray dryer, hot air generator bet dryer, fluid bed dryer, vibrating screen, rotary screen, gyro screen, air classifier material separator, jaw crusher, pre crusher, screen pulveriser, impact pulveriser, micro pulveriser, ball mill, dry grinding ball mill system, wet grinding ball mill system, cone crusher, material handling equipment- belt conveyor, screw conveyor, bucket elevator, screw feeder, pneumatic conveying system, dust collection system, ribbon blender, magnetic drum, trommel, vessel, reactor, auto clave main turn.
