Water Storage Water is one of the most essential necessities in our life. Yet most of Indian households do not have access to drinking water in their homes. Tecza Pipes has now brought its more than 10 years legacy in manufacturing high quality PVC piping systems to develop Tecza Water Tanks. The best quality, trust and high value of Tecza Pipes, now in Water Tanks.
Oxygen Storage tanks Fabrications Oxygen Storage tanks are stationary, vacuum-insulated pressure vessels that consist of an inner and an outer pressure vessel. The inner vessel is designed for the storage of low-temperature, liquefied oxygen. The space between the inner and outer vessel is evacuated up to a pressure of below 50 microns. Oxygen Storage Tanks are offered in different sizes and capacities. Our range of Liquefied oxygen nitrogen gas storage tank is demanded by chemical and pharmaceutical industries. Our company offer are engineered for maximum flexibility and minimum cost. Being technologically advanced, the tank is time and resource saving options. for more details please contact
In In-direct heating type tanks-cylindrical in shape& horizontal in position, the bitumen is heated by circulating hot thermic oil through its heating coil. A thermic oil heater with oil fired burner heats the thermic oil & this hot oil is circulated through the heating coil inside the bitumen tank by an oil pump on heater. A single heater can easily heat nos. of tanks as required in continuous process. The temperature of oil is very well controlled by an auto thermostat on heater and so, bitumen never gets over-heated. Thus, the quality of bitumen (viscosity) never gets deteriorated/spoiled in this kind of indirect heating system. Fuel consumed to heat every ton of bitumen is also less compared that for a direct heating system.
Design Code: ASMEVIII-I Design Pressure: Up to 35 Mpa Material Code: From ASME & ASTM Diameter Range: Up to 4 Meter Length Range: Up to 50 Meter Available Material:CS, SS, Alloy, High Alloy Major Markets: Refinery, Petrochemical, Chemical, Offshore, Pharmaceutical, Marine industries As Per Exporting Package For Customers
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality. The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³, Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market. Stainless Steel Bolted Frac Sand Storage Tanks Specifications Coating color dark blue, dark green, white, and customized A standard steel plate size effective size 2400mm x 1200 m Steel plates thickness 3mm - 12mm, depends on the diameter & height Coating thickness 0.25mm - 0.4mm, two coatings internal and external Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 Adhesion 3,450N/cm Elastic same as steel sheet, around 500KN/mm Hardness 6.0 Mohs Service life >30 years Spark test >1500 V Permeability gas and liquid impermeable Easy yo clean smooth, glossy, inert, anti-adhesion Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
As the most popular solution for chemical wastewater Treatment, Glass Fused to Steel (GFS) Tanks are widely used as industrial water storage tank,potable water storage, fire-fighting water treatment ,irrigation water storage etc. With enamel coating technology, GFS tanks has excellent corrosion resistance, no need to do any anticorrosive treatment, and also of superior aid and alkali resistance. Advantage of GFS Industrial Water Storage Tanks 1. Short installation period : compare to more than 40days installation time for other type tanks, usually GLS tanks only needs even less than 15days. 2. Superior corrosion resistance : GLS tanks can resist pH rage 1-14. 3. Beautiful appearance : Standard color is dark green, and color can be customized according to customers request. 4. Climate adaptability : GLS tanks can be used in almost all kinds of weather conditions, that is very important for some special areas. 5. Long service life : more than 30 years service life. 6. Easy construction : No requirement for big installation equipment, and can be easily expand, dismantle and move. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Brief introduction of Glass Fused to Steel Waste Water Storage Tanks Glass Fused to Steel Waste Water Storage Tank has enjoyed increasing popularity over the past years . Glass Fused to Steel Waste Water Storage Tank is widely used in the water and wastewater treatment industry with excellent corrosion resistance for both internal and external coated with corrosion-resistant silica glass. In the wastewater treatment sector , Glass Fused to Steel Waste Water Storage Tanks can be used as aeration tanks, aerobic reactor, water purifying tanks, leachate storage, trickling filters. The tanks are constructed in full accordance with the applicable AWWA D103 Six good reasons to choose Glass Fused to Steel Waste Water Storage Tanks - Minimal maintenance costs - Colors can be customized and will not fade away with time - Tanks are bolted, it is easy to ship and dismantle - Size is expandable - Simple installation, do not need big equipment for erection, cost-effective - Over 30 years service life Our advantages . The largest and most professional manufactory in China . Tanks are up to NSF- 61 and AWWA D-103 standards . More than twenty years' experience . Already successfully built more than 2000 tanks worldwide . Excellent after -service and professional team . Time-saving and cost-effective Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Water storage tanks can be installed in any number of commercial or industrial application processes. We design our water storage tanks based on your needs, with the latest technological resources and using the best quality materials pursuant to international standards. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition. Glass-Fused-to-Steel tank Applications
For healthy and easy installation stainless steel warehouses Tanks are guaranteed high quality and are produced in Turkey
Wastewater storage tanks is a kind of common wastewater treatment equipment in the field of wastewater treatment. There are many kinds of complicated corrosion forms in wastewater, such as acid-base corrosion, atmospheric corrosion, abrasion, penetration type expansion crack and microbial corrosion of bacteria and algae, which seriously affect the service life of the wastewater treatment tank. Therefore, the wastewater treatment needs to use an excellent performance Glass-Fused-To-Steel tank to meet or exceed environmental standards. Center Enamel provides a reliable, durable and high-quality wastewater storage solution. Center Enamel Glass-Fused-To-Steel tank is the best option for wastewater storage. Center Enamel's Glass-Fused-to-Steel Tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our GFS tank engineers make the tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., Center Enamel storage solution to agricultural industry offers the following benefits: 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are an exceptional solution in the harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shut down during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. The tank can be dismantled and rebuilt, gives continuous asset value to the product.
To feed the growing world population, increasing agriculture production is required. under such circumstance, premium containment solution is required for crops & forage storage, manure, sludge, irrigation during agriculture production. Agriculture waste such as livestock and poultry manure and energy crops are an important part of the global growth of green renewable energy solutions. Center Enamel Glass-Fused-to-Steel Tanks are made of special steel plate, special sealant, self-locking bolt, and the service life for more than 30 years. After pretreatment, the special steel plate is coated with two or three layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate. The protective layer formed by the coating can not only prevent corrosion of the tank body, but also has the function of strong acid and alkali resistance and strong abrasion resistance. Center Enamel Glass-Fused-To-Steel Water Tanks for irrigation in agriculture. In order to ensure the normal growth of crops and obtain high and stable yield, it is necessary to supply crops with sufficient water. Under natural conditions, crop water requirements are often not met due to insufficient precipitation or uneven distribution. Therefore, artificial irrigation is necessary to make up for the lack of natural rainfall. Also, we can use Glass-Fused-To-Steel Tanks to Collect and store rainwater that falls onto buildings and using it for agricultural purposes, which can cut the bill of irrigation water. That is why we choose Glass-Fused-To-Steel Tanks as for irrigation in agriculture, also can be widely used in vegetables, flowers, orchards, medicinal plants planting places.
Pressure vessel : storage tank for storing oil, fuel, diesel, nitrogen, natural gas tank, air tank, water tank , LPG tank , expansion tank/vessel. The capacity is above 800L to 200 000L. The pressure range is 0.1Mpa—10Mpa The material is carbon steel and stainless steel 304,304L,316,316L. The storage can store various medium like oil,gas,water… The drawing is designed by us according to customers’ requirements.
Stainless steel storage tanks 5 ltr to 500 ltr 304 and 316 l Un approved
The Allied Chemical and Equipment provides full customization on Storage Tank as per required specification and fulfilling needs of the customers. These tanks are corrosion resistant and easily with stand various temperature, fluctuations, and deviations. Product Specifications Storage Capacity: 0.25KL to 30KL Material Spec and Grade: SA 240 & SS 304/316/316L, IS 2062 & E250Br Gr.B and SA 516 Gr.70 Types: Horizontal, Vertical, Dished, Flat and Conical Storage Tanks Technical Specification MOC can be customized according to the end use with easy drain out provision Monkey ladder and safety cage on the outer side of the tank and ladder inside for safe man movement will be provided, if required. Cladding will be done either in stainless steel (welded or riveted) or riveted aluminium to withstand internal temperatures. Quality Assurance The Allied Chemical and Equipment fabricates complete GMP/Non GMP systems with detailed engineering layout. All our new vessels are designed according to the stipulation of industry standards - ASME VIII, Div 1 and Good Engineering Practices
Inflatables Products With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts. The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors. Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
Inflatables Products With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts. The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors. Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
We are manufacturer of water storage tank. Diffrent capacity and layers available. 1 layer to 7 layers tanks we manufacture. Different colors available
Large storage tankcan do odm & oem
