1) Used/surplus/new AZS Refractory having min 33%Zirconia. 2) Spent High Chrome Refractory(WithoutMgO) 3) Spent activated alumina
Monolithic refractories 50kg/bag
Our main exporting brand of refractory bricks are: Direct bonded magnesia-chrome bricks ííííthe product is manufactured by taking high purity magnesia and high quality chrome as raw materials through the process of high pressure moulding and high temperature burning.It has a good thermal shock resistance and volume stability and is applied in the cement and glass industries. Main physiochemical property indexes of product Chemical composition and technical performance Product brand Lzmg-5 Lzmg-8 Lzmg-12 Lzmg-15 Mgo(%) í²70 í²65 í²60 í²55 Sio2(%) ín1.5 ín1.5 ín1.8 ín1.8 Cr2o3(%) í²5.0 í²8.0 í²12.0 í²15.0 Apparent porosity(%) ín18 ín18 ín18 ín18 Cold crushing strength(mpa) í²40 í²40 í²40 í²40 0.2mpa refractoriness under load t0.6(oc) í²1650 í²1650 í²1650 í²1650 Thermal shock resistance(1300oc air cooling) í²20 í²20 í²20 í²20 Also we specially in exporting submerged entry nozzle, sliding plate, ladle and tundish nozzles and well block, etc. Herewith please find some typical refractory material which we have been exported for your reference: Ladle, tundish nozzles and well blocks Item Chrome corundum nozzle Corundum nozzle Al2o3-sic-c nozzle Spinel-c nozzle Lt-70 nozzle Lt-85 nozzle Upper porous nozzle for Tundish Al2o3 (%)í² 90 93 65 55 70 85 80 Cr2o3 (%)í² 2.5 13(mgo) 2.5 C (%)í² 22 7 10 7 3 A.P. (%)ín 2.9 24 8(impre-gnated) 8(impre-gnated) 15 15 24 B.D. (g/cm3) í² 1790 2.95 2.7 2.7 2.7 2.9 Refractoriness (íµ) í² 1550íµx3h 1790 Linear change on reheating(%) +0.1-+0.3 1600íµx3h +/-0.5 Wooden pallets
Refractory brick Al2o3 -38% Ccs ->210kg/cm2 Fe2o3 -
Refractory anchors Ss refractory anchors are y, u & v shapes, Used for laying monolithics, castable refractory, ceramic fibre blanket, Y type : 230 x 115 x 05 mm [total lenth 230mm, width 25 mm, thick 05 mm Y type : 200 x 100 x 05 mm Y type : 150 x 75 x 05 mm Y type : 75 x 30 x 05 mm U type : 230 x 27 x 05 mm U type : 85 x 16 x 05 mm U type : 55 x 16 x 05 mm V type : 55 x 15 x 05 mm
Refractory materials Our company is a very professional manufactory of refractory Raw materials from china. Our main products are as follows: 1. Symullite--synthetic homogenized mullite. (sm60 / sm70) 2. Rotary kiln kaolin--calcined natural kaolin materials. (ck42 / ck45) 3. Kaollite--homogenized natural kaolin mullite. (kl45 / kl47 / kl50) 4. Different grades of rotary kiln bauxite from 85 to 89. 5. Other refractory and mineral materials We could supply our materials in kiln run size and standard size 0-1mm, 1-3mm, 3-5mm, 5-8mm. Other size which not exceed -325mesh could be Available upon the request of client. The yearly output of our company is 80, 000 tons and the crushing capacity is 40, 000 tons. Kehuan atvipdot163dotcom
Refractories bricks
Refractory brick Refractory products and all range of foundry products Weight
Silica-Aluminous class high duty regular. Manufactured with high quality selected raw material, providing high resistance against chemical attacks and temperature variations. Technical Specifications: Chemical analysis(%) Al2O342~45 SiO246~48 Fe2O3
Andalusite is a superior high-alumina refractory material, with high temperature stability, chemical resistance, heat resistance, strong impact resistance, high thermal mechanical strength characteristics. The color of andalusite is gray, pink and red-brown. Heating to 1300, Andalusite will turn into mullite, which is one of the raw materials to produce advanced refractories.
We have more than a century of experience in the refractories materials and own 90% of the Greek market.
We offer high quality refractory products and materials meeting the entire needs of our valued clients. OUR REFRACTORY PRODUCTS AND MATERIALS Induction Furnace Lining (Quartz) Induction Furnace Lining (Neutral) High Alumina Ladle Bricks and Blocks Magnesia Carbon Ladle Bricks and Blocks Magnesia Carbon Bricks for LRF High Alumina Bricks for LRF Porous Plugs Well Block Slide Gate Sets Tundish Lining Tundish Nozzles COPPER MOULD TUBES We supply Copper Mould Tubes manufactured by the topnotch manufactures of China. Sizes and Shapes Single Taper, Double Taper, Triple Taper, Multi Taper Square: 80x80 to 200x200 mm Rectangle: 150x180 mm to 250x300 mm Radius: 3 meter to 12 meter meter Length: 700 mm to 1200 mm Customised: shapes, sizes and material
Al2O3 Content (%): 75%-90% Refractoriness (Degree): Common (1580°< Refractoriness< 1770°) Model Number: GLM- FIRE CAST Brand Name: GLM
The use of refractory cement in boiler construction is also very large, and refractory cement is also a refractory castable that we need most. Refractory cement is also called aluminate cement. The raw material of aluminate cement is bauxite and limestone. It is made of calcined, with calcium aluminate as the main component, clinker with alumina content of about 50%, and then ground into hydraulic cementitious material, which is also a kind of special cement. The thermal stability of refractory cement is good. The aggregate is almost all clinker. The expansion and the shrinkage of the cement are low. Therefore, the thermal expansion of the masonry is smaller than that of the brick, the temperature stress is relatively small, and the structure is also various. Reticulated, needle-like, chain-like crystalline phase, strong resistance to air temperature, for example, used to cast soaking furnace mouth and furnace cover, the furnace age can be extended to one and a half years; and the fire resistance of refractory bricks and the same The texture of the refractory brick is similar, but because the refractory cement does not have a net more sintering, the initial blasting shrinks larger, so the load softening point is slightly lower than the refractory brick, but as a whole, the refractory cement is still due to the refractory brick.
The use of refractory cement in boiler construction is also very large, and refractory cement is also a refractory castable that we need most. Refractory cement is also called aluminate cement. The raw material of aluminate cement is bauxite and limestone. It is made of calcined, with calcium aluminate as the main component, clinker with alumina content of about 50%, and then ground into hydraulic cementitious material, which is also a kind of special cement. The thermal stability of refractory cement is good. The aggregate is almost all clinker. The expansion and the shrinkage of the cement are low. Therefore, the thermal expansion of the masonry is smaller than that of the brick, the temperature stress is relatively small, and the structure is also various. Reticulated, needle-like, chain-like crystalline phase, strong resistance to air temperature, for example, used to cast soaking furnace mouth and furnace cover, the furnace age can be extended to one and a half years; and the fire resistance of refractory bricks and the same The texture of the refractory brick is similar, but because the refractory cement does not have a net more sintering, the initial blasting shrinks larger, so the load softening point is slightly lower than the refractory brick, but as a whole, the refractory cement is still due to the refractory brick.
The use of refractory cement in boiler construction is also very large, and refractory cement is also a refractory castable that we need most. Refractory cement is also called aluminate cement. The raw material of aluminate cement is bauxite and limestone. It is made of calcined, with calcium aluminate as the main component, clinker with alumina content of about 50%, and then ground into hydraulic cementitious material, which is also a kind of special cement. The thermal stability of refractory cement is good. The aggregate is almost all clinker. The expansion and the shrinkage of the cement are low. Therefore, the thermal expansion of the masonry is smaller than that of the brick, the temperature stress is relatively small, and the structure is also various. Reticulated, needle-like, chain-like crystalline phase, strong resistance to air temperature, for example, used to cast soaking furnace mouth and furnace cover, the furnace age can be extended to one and a half years; and the fire resistance of refractory bricks and the same The texture of the refractory brick is similar, but because the refractory cement does not have a net more sintering, the initial blasting shrinks larger, so the load softening point is slightly lower than the refractory brick, but as a whole, the refractory cement is still due to the refractory brick.
Refractory items like Basic Ramming mass, Basic patching mass, Fetling mass, Tundish spray mass & gunning
For refractory materials, sintering is very important, whether it is natural raw materials, or synthetic raw materials, have to be burned, to sinter before use, fire-retardant refractory products is to achieve the date of sintering. Unshaped refractory materials in the process of gradually sintering. From a process point of view, sinter is a sturdy, low porosity (almost airless 7L) stone made from a powder at high temperatures. Refractories degree of flexibility of the signs, usually with the object size reduction (the so-called shrinkage), reduced porosity and bulk density increased to measure. Sintering is mainly due to the strengthening of refractory material, the inevitable result of increased contact between the particles. Sintering (intrinsic) has the following processes: changes in the shape of the pore size phase; crystal growth, residual stress (suppression) reduction and equilibrium; liquid phase formation; redistribution of phase space; In many cases, sintering accompanied by multi-phase transformation of certain phases, solid-phase chemical reactions or liquid-phase reactions. The reaction forms a new phase and a solid melt. The final cooling complicates the enumeration process, with some of the opposite processes occurring. Multi-product changes, melt crystallization and crystallization pressure may occur, the formation of the glass phase and other phenomena. Like the lower temperature drop, the refractory material produces stress and often produces macroscopic defects so that the refractory products are discarded. Temperature gradients, temperature change rates, phase and concentration gradients, atmospheres, high frequency field effects, vibrations and other conditions in a refractory body all depend on the temperature. Even within the refractory material. y1 its temperature changes have a very complex phenomenon, can not fully enumerate the occurrence of the process
Production facility and instrument Under the management of ISO9001 quality control system. From raw material to finishied products, and carry out each physical test and chemical analysis with all types of testing apparatus, which include thermal shock resistance instrument, creep apparatus, reheating liner change apparatus, etc
ZIBO SK refractory mortar is a new kind of paste-like bonding material which is formed particularly from specially sorted powder made from the identical raw materials and classification temperatures in light with the brick utilized in furnace and their refractory grades. During the process of production, it undergoes chemical reaction and stirring-up with added inorganic bonding agent and additives. ZIBO SK refractory mortar can be classified into four categories according to its service temperature in normal circumstances and they must be used to support the lightweight mullite brick subject to the same class. Category Air setting refractory mortar Grade-23 Grade-26 Thermalâ??hardness refractory mortar Grade-28 Grade-30 Features High bonding performance for bricks engineering Excellent sealing capability, resistance to erosion High refractoriness under load Outstanding efficiency in reducing the slag Ensure well-sealed joints for convenient installation Consistency and bonding effectiveness Typical Applications Necessary auxiliary materials for insulating Firebricks in the furnace lining