The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or brown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. How Areca palm leaf plates are made? Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. Once clean, the palm sheaths are allowed to air dry. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. Cleaned plates are packed in 25 pieces units and shrink wrapped. Further packed into corrugated carton box as per customer packing requirement. Additional Features Suitable for hot /cold dishes, gravy, curry etc Microwave oven friendly. Withstand temperature up to 120*C Suitable for refrigerator use. Gets fully decomposed in soil within 30 to 45 days and acts as organic manure.
The Areca palm (Areca Catechu Linn), is extensively cultivated in South India as a cash crop, gives a strong and supple material that is amenable to various shaping. This product is obtained from the plant leaf part, which in the course of its biological life cycle, dries, falls and degenerates. The naturally shed leaf sheath is strong, odorless, water and heat resistant. Areca palm leaf sheath has its own natural grains and characteristic texture, very much similar to those seen in furniture grade wood. The outer surface of the sheath is greenish or b rown, waxy and tough, while the inner surface is creamy in color and has natural grains and glossy finish. An added advantage with this material is that it can be used to bake foodstuff and can even tolerate microwave cooking. With such amazing properties, this raw material has been used to manufacture a variety of items of day-to-day use such as disposable plates. The entire manufacturing process uses no chemicals, resins, and dyes, strengthening agents or synthetic materials whatsoever. Areca palm leaf plates are totally safe and non toxic. How Areca palm leaf plates are made Freshly fallen, naturally discarded sheath leaves of the Areca palm tree are collected. These leaves / sheaths are neither pulled off the tree nor are any trees cut down, as this is a non-timber forest resource. The trees naturally shed their old leaves, which are then picked up and put into good use. Each raw sheath is then thoroughly washed with pressure water jets to remove any clinging dirt. It is then hand washed in pure water. The leaves are then rinsed third time in fresh water. Once clean, the palm sheaths are allowed to air dry. The clean & dry palm leaves are then molded into various shapes using heated press. Multiple plates of different shapes and sizes are often cut from each leaf in order to reduce waste. Once pressed into shape, each plate is further cleaned with air jet to remove any dust produced in the cutting process. Cleaned plates are packed in 25 pieces units and shrink wrapped. Further packed into corrugated carton box as per customer packing requirement. Additional Features Suitable for hot /cold dishes, gravy, curry etc Microwave oven friendly. Withstand temperature up to 120*C Suitable for refrigerator use. Gets fully decomposed in soil within 30 to 45 days and acts as organic manure.
The following are some of the elements that make up the palm shell: Moisture Content Palm shells contain a moisture content (moisture in analysis) of 15-25% (As received) or 8-11% (Air Dried Basis). This high water content needs to be considered in its use as fuel or fertilizer. This is because water content that is too high can affect the efficiency of combustion and the quality of the fertilizer produced. Minimal Ash Content Palm shells also have minimal ash content, which is around 1-3%. This low ash content makes palm shells a cleaner and more environmentally friendly fuel. In addition, the low ash content also facilitates the processing of palm kernel shells into organic fertilizer High Evaporation Rate Another content contained in the shell of the palm is a fairly high evaporation rate (volatile matter), which ranges from 68 â?? 70%. This content indicates that the palm shell is flammable and suitable for use as an alternative fuel. In its application as a fertilizer, high evaporation rates also help speed up the decomposition process and improve soil quality. High Active Carbon Content Palm shells also contain around 20-22% pure Activated Carbon (fixed carbon). This content makes palm shells suitable for use as an alternative fuel that is environmentally friendly, especially in industrial applications. High Calorie Content The calorie content contained in the palm shell is also quite high, which is more than 4,200 Kcal. This high calorie content makes palm shells a potential alternative fuel in replacing fossil energy sources.
Cotton microfiber heat transfer printed towel is very popular among young people. The favorite pattern can be printed on the towel by heat transfer printing, which adds fun to your life. Heat transfer printing does not have effect on water absorption of cotton microfiber towel. So it can be used as face towel, bath towel and beach towel and it is very convenient. Product Description Various pattern designs can be printed on Yizhaoda cotton microfiber towels by heat transfer printing including high-definition photos. This printing method does not require plate making, and can achieve small batch production. Heat transfer printed towel can be used as face towel, bath towel, beach towel, household cleaning towel, handkerchief, promotional towels in department stores and so on. The printing pattern can be designed at will, so it is not easy to produce the same products in the market, which can meet the individual needs of customers. It's a very popular product in the market. We export cotton microfiber printed towel China to Japan, United States, Europe, India, Brazil, South Africa and other countries and regions.� Heat transfer instructions The principle of heat transfer printing: firstly print the pre-processed printing pattern on a specific transfer paper with heat transfer ink, and then transfer the pattern from the transfer paper to the clothing fabric by high temperature and high pressure. It is based on the sublimation characteristics of some disperse dyes. Disperse dyes that can be vaporized at 150-230 �° C are selected and mixed with solvents such as alcohol to make "color inks." Then according to different design requirements, the "color ink" is made into printing pattern and printed on transfer paper. Then the paper is in close contact with the fabric. Under the control of a certain temperature, pressure and time, the dye is transferred from printed paper to chemical fiber fabrics such as clothing, and penetrates into the fiber through the principle of dye diffusion, so as to achieve the purpose of printing and coloring, and finally complete the whole printing process. This printing technology integrates green, environmental protection, low carbon, energy saving, emission reduction, ecology, etc., which is a major breakthrough in textile printing technology.The fabric after printing has soft hand feel, bright color, rich layers and good air permeability. If a customer gives you a piece of pure white polyester or light colored polyester nylon fabric with high polyester content, no matter you use paint screen printing or disperse dyes, ink-jet direct printing, or reactive printing technology to do printing, there will always be more or less unsatisfactory, either the color fastness is not good, the hand feels hard, or the printing cost is high. In other words, the above problems can be solved if the cloth printed by sublimation heat transfer printing
With its minimized size, the ZL-13 is designed for users who would like a thin, compact lighter that is easily portable for when on-the-go.
Designed as a flat rectangular shape with a curve at the top in order to maximize the printing area, enabling large creative designs to fully cover the lighter surface.
With its simple and ergonometric shape, the Mega Jet model is Zengaz's best seller worldwide.
Premium jet lighters and jet torches..
Place of Origin: Guangdong, China (Mainland) Brand Name: Lecemo Model Number: LPWK-JYF-68 4k-5 Dimension: 135*68*8.8mm Weight: 140g Capacity: 5001-6000(mAh) Outport: DC 5V /2A (Max) Input: DC 5V/2A Socket Type: USB Port Color: Black, Golden, Silver USB Port: 2 Ports Battery Type: Li-ion Polymer Battery Features: High Capacity Keywords: Pocket power bank 4500mah Warranty: 12 Months Type: small power bank 4500mah Item: Cell Phone Charger Support devices: Smart Phones/ipod/ipad/mp3/mp4/bluetooth Certification: 4 lever led indicator LED Torch: No colors: Rose Gold,Space Grey
Place of Origin: Guangdong, China (Mainland) Brand Name: Lecemo Model Number: LPWK-JYF-85D 9k Dimension: 138*68*15mm Weight: 206g Capacity: 9001-10000(mAh) Outport: DC 5V /2A (Max) Input: DC 5V/2A Socket Type: USB Port Color: Black, White, Yellow USB Port: 2 Ports Battery Type: Li-ion Polymer Battery Features: High Capacity Keywords: factory display stand power bank Warranty: 12 Months Type: power bank mobile Item: 9000mah power bank Support devices: Smart Phones/ipod/ipad/mp3/mp4/bluetooth Function: Led digatal display power lever LED Torch: No
Product Attributes 68 PcsSet Disposable Make Up Cosmetic Cotton Pads Wipe Pads Nail Art Cleaning Pads Soft Daily Supplies Facial Cotton Makeup Remover Tool Features 1The product is made of premium pure natural cotton fiber Easy to use light weigh 2Apart from its superior water absorbency Soft Cotton is also strong and tough 3Texture soft does not hurt the skin and skin friction 4Absorbent and sanitary nbsp Specifications 100 brand new high quality Type Cleansing Cotton Material Cotton Color as the picture shows Features Lightweight Soft Functions Makeup removermake upcleaning Using at The Eyes Lips Face Eyelashes Applicable Skin General nbsp Package include 68 pcsbag Make Up Cotton Pads
Weight of Day Old Kadaknath Chicks 28 to 30 grams Bird Body Color Jet black Body weight in 8 weeks 1.0kg to 1.1 kg Period required to attain 1 kg of body weight 13 to14 Weeks Period required to attain 1.5 to 2 Kg Body weight Like Country Chicken Total weight (male) 2.3 to 2.5 kg Total weight (female) 1.6 to 1.8 kg Quality of Meat Black like pure country chicken Meat percentage without skin (dressed) 65 % Are these good for Commercial or Backyard poultry farming Good for both Age for first egg laying 23 to 24 weeks Egg laying/month 11-12 Annual egg laying 120 Egg colour Brown Feed required 50 kg for entire growth
Product Definition Apricot kernel oil is obtained from the kernels of apricots (Prunus armeniaca), which have a fatty oil content of around 40 to 50%. The majority of its use and the great strength of the oil is its external use as a skincare product. This oil is popularly used in cosmetics like creams, soaps and skin lotions. The oil is easily absorbed into the skin without leaving any oily residue. Technical Data APRICOT KERNEL OIL exhibits greater stability over time compared to other oils due to its high content in oleic acid. It contains oleic (58-68%), linoleic (22-31%) and palmitic (3-18%) acids. It is also high in vitamins E and A which can be used to moisturize and nourish dry and mature skin. Fatty Acid Composition(%) Oleic Acid 58-68 Linoleic Acid 22-31 Linolenic Acid Max. 0.8 Palmitic Acid 3-8 Palmitoleic Acid Max. 1.5 Stearic Acid Max. 3.5 Quality 1) Sort out high quality organic raw materials; 2) Cold pressed process: Pure and separation by tremendous pressure of mechanical, to ensure that nutrients are not destroyed; 3) Physical refining: Do not use any chemical means, through physical purification & filter, to ensure that the product does not contain any chemical additives and chemical residues; 4) Save: Relying on almond rich contents of vitamin E, polyphenols and other natural antioxidants, to ensure no artificial antioxidants (TBHQ). 5) The odour and taste is expected to be characteristic of the product and free from rancid odour and taste. BRIEF INTRODUCTION Registered Capital: 20 million yuan; Cover area: 32 acres; Woodland Management: 4500 acres; Office Building: 860 square meters; Production Workshop: 5600 square meters; Total Assets: more than 121.94 million yuan. Certificate: HACCP; EU Organic Certificate
Carrier oil, also known as base oil or vegetable oil, is used to dilute essential oilsand absolutes before they are applied to the skin in massage and aromatherapy. They are so named because they carry the essential oil onto the skin. Pure Carrier Oils FOB Price USD Sr. No. English Name 1KG 1 Almond oil (Sweet) $52 2 Apricot oil $15 3 Argan oil $39 4 Castor oil $13 5 Coconut oil $13 6 Coconut oil (Virgin) $15 7 Cumin seed oil (Black) $26 8 Evening Primrose oil $44 9 Flax seed oil $14 10 Guava oil $68 11Jojoba oil $40 12 Neem oil $10 13 Olive oil $12 14 Peach Kernel oil $32 15 Papaya oil $80 16 Pomegranate oil $48 17 Raspberry oil $65 18 Rose Hip oil $71 19 Wheat Germ oil $17
Products Description The pure titanium aerator head for ozone aeration is made of industrial pure titanium powder (purity â?¥ 99.6%) as the main raw material, which is sintered at high temperature and high vacuum. The aeration head is divided into three types: tube type, plate type and spherical type. The spherical type is welded by porous titanium spherical surface and titanium plate, which can be directly connected to the pipe thread. Various interface connection methods can be customized according to the specific needs of customers. The pure titanium aerator head for ozone aeration is widely used in Ozone sterilization for drinking water and reclaimed water reuse, aeration in sewage treatment aeration tanks, and fermentation oxygenation, etc. The aeration bubble diameter of this product is small, the gas-liquid interface diameter is small, the gas-liquid interface area is large, the bubbles diffuse evenly, no hole blockage occurs, and the corrosion resistance is strong. The aerator is an essential equipment for aeration and oxygenation of drainage. Underwater aerators mainly include microporous aerators and jet aerators, which can be divided into surface aerators and underwater aerators according to the method of use. It is suitable for urban sewage, new expansion of large factories and renovation of old aeration tanks, and the aeration tanks can be operated intermittently. The oxygen utilization rate of the aerator head has high power efficiency, large service area, low energy consumption, fine and uniform bubbles, good flow rate and state; no need for repeated flushing, and easy management. Products features 1. Uniform and small pore size; 2. High porosity and large aeration range; 3. High temperature resistance, acid and alkali resistance, oxidation resistance; 4. No particle shedding; 5. Outstanding pressure resistance; 6. Good sealing. Application field 1. Ozone sterilization and aeration of pure water and mineral water; 2. Ozone aeration of industrial wastewater; 3. Domestic sewage treatment aeration; 4. Ozone aeration of petrochemical wastewater. Product specification Spherical type: �?100MM, �?150MM, �?180MM Flat type: �?125MM, �?180MM, �?235MM Tube type: �?20MM, �?30MM, �?40MM, �?50MM, �?60MM Interface: 4 points, 6 points, other special interfaces can be customized
Product Description JK Column Pipes are made of UPVC material and are non-corrosive, Hi-tech and Hi-tensile pipes with thick and thin technology to ensure uniform thickness across the length of pipe and the square threads for extra strength. Pipes are available in various sizes starting from 1 to 4 .The pipes come in various typesV4 12.5 Kg,V4 15 Kg, Eco Medium, Medium, Standard & Heavy. Pipe Dimension Chart will clearly indicate the best type to be used for any particular application, depending upon the depth of the bore-well and the type of pump head. Rubber Ring: Rubber Rings are specially designed and are made from special rubber to ensure leak proof fitting and also absorbs the vibrations of the pump. This results in extended life of motor and pump bearings. SquareThreads: Square threads are made by automatic CNC machines with perfect dimensional accuracy reduces the tensile loads and provides extra strength, hence this coupling benefits pump fitting becomes strong with improved load bearing capacity. Special designed threads also benefits easy pipe fittings during Installation Process. Better thickness and capability: To ensure the extra strength and capacity to bear extra weight because of the threading, the walls of the pipe are given extra thickness, by thick and thin process. Pure and safe drinking water: The water pumped through JK UPVC column pipes is 100% safe and pure, as it is manufactured without any metallic materials. Uses: Submersible and jet pumps are used for Irrigation, in Domestic, Industrial Mining. Column Pipes are much more helpful as compared to MS, GI, HDPE and SS Pipes. Advantages of JK Column Pipes: Long Life Easy to handle in transportation and Installation Power Saver Smooth internal surface hence free flow of water Light in weight compared to others MS Pipes, GI Pipes & HDPE Pipes, yet Strong & Durable Free from rusting &corrosion No electrolytic deposition
SMT Nozzle Cleaning Machine, SMTfly-36 Machine description: The latest intelligent nozzle cleaning machine SMTfly-36 with a moving fixture, dry at the same time while cleaning. Clean 36 nozzle per time, breaking the traditional cleaning machine cleaning methods and the number of restrictions. It uses pure water or DI water to clean, cleaning effect is good, cleaning rate of 99% or more, after this upgrade to join the intelligent detection of water storage device, whether the lack of water or too much water affect the cleaning effect function, no need to worry about water lacking or more water, so cleaning more peace of mind, more intelligent. Standard equipped with a special nozzle detection device for the nozzle after cleaning detection. Machine Feature: 1. Clean 36 nozzles per time, quicker and more efficient 2. Automatic cleaning, avoid troubles caused by ultrasonic cleaner, reduce rejection rate. 3. To clean the dirt completely which ultrasonic cleaner can not deal with 4. Cleaning result will not affect by the smaller and smaller nozzle 5. Thoroughly clean 99% dirty nozzle, extend the lifespan of nozzle 6. Protect the coating surface of nozzle and its reflection panel. 7. Never use solvent, only environmentally friendly DI water is enough 8. Easy operation 9. Applicable to all kinds of mouter nozzles, especially on corss, I-shape, odd shape nozzles Machine Specification: Item Parameter Air supply 0.5-0.7Mpa Power supply AC 220V, 1A, 250W Liquid DI water or purified water Jet Pressure â?¤0.55Mpa Liquid consumption â?¤150cc/hour Nozzle range Min 01005-Max inner diameter ï¿ 2.0mm Jig spec 36 holes Machine size 660*560*480mm Machine weight 80kgs
Physical and chemical indicators Name of the indicator Norm ND for the product Actual ND indicators for test methods Mass fraction of moisture and volatile substances,% 7 - 10 5.4 GOST 13979.1-68 Crude protein in absolutely dry matter,% 39.0 35.2 GOST 13496.4-93 Mass fraction of crude fiber per dry matter,%, no more than 26.0 11.5 GOST 13496.2-91 Mass fraction of fat extract in dry matter,%, no more than 4.0 4.0 GOST 13496.15-97 Sunflower cake meets the requirements of the DSTU 4638: 2006 standard Pressing is the process of squeezing oil out of oilseeds. The extraction process involves isolating the residual oil content from the seeds after pressing using organic solvents. Moreover, if the cake obtained after pressing contains up to 10% residual oil, then in the meal this percentage is increased to 1.5 - 2%. Meal is indispensable as a high-protein additive in the production of feed for cattle, pigs, and poultry, as it contains natural proteins, fiber, vitamins E and B, potassium, phosphorus and other minerals. Sunflower meal is a valuable feed that contains 30â??43% crude protein, a rich set of amino acids, in particular a high content of methionine, which has a beneficial effect on the growth and development of young animals. Compared to cake, meal contains slightly more crude protein, but less fat - no more than 1.5%. The husk content is no more than 16% (meal is also produced without husk). Sunflower meal is deficient in lysine, but unlike other meals it contains virtually no anti-nutrients. The arabinoxylan index of sunflower meal relative to soybean meal is 117, which ensures high protein digestibility compared to other protein feeds of plant origin (78-80%). The content of vitamin B in sunflower meal is significantly higher than in soybean meal. Sunflower meal is rich in niacin, riboflavin, choline, biotin, pantothenic acid and pyridoxine. In addition to this, sunflower meal is an excellent source of vitamin E. Factors limiting the use of sunflower meal (cake) include chlorogenic and quinic acids, the level of which is 1.56 and 0.48%, respectively, and fiber. The negative effect of high doses of chlorogenic acid is manifested in the inhibition of trypsin and lipase, so its level should not exceed 1%. Including methionine in the diet in addition to the norm prevents the negative effects of excess chlorogenic acid. Areas of application of sunflower meal: It is used for feeding purposes of animals, birds, and fish. It is used in its pure form and also as an additive in animal feed. Contains up to 43% easily digestible protein. Sunflower meal increases animal productivity and improves the quality of livestock products. Increases the fat content in milk and the daily milk yield of cows.
Double Person Sector Acrylic Whirlpool Bathtub TMB007 Product Description Place of Origin: Zhejiang, China Brand Name: TITA Model Number: TMB007 Material: Acrylic Warranty: 3-5 Years Function: Message Color: Pure White Shape: Sector Certification: CE; RoHS Installation Type: Corner Drain Location: Corner Faucet: Not Included Capacity: Couple person Way of Control: Computer Control Drainage Material: Brass with Chrome Application: Indoor Acrylic Bathtub Message Type: Combo(Air&Whirlpool) Special Function: Hydralic Adjustment System Electronic Consumer: Total 2.5 KW 1) Whirloppl Pump: 0.75KW/1.0HP/3.8amp 2) Air Pump: 0.25KW/1.2amp 3) Heater System: 1.5KW/1.2amp Size: 150x150x68cm Packing Volume: 1.93CBM Qty/20FT: 12 sets Qty/40HQ: 33 sets Material Body: 5mm acrylic and ABS compound material with 3 layers glass fibre resin strength stainless steel bracket, temper front glass Jets: Two types of materials--plastic or stainless steel Faucet: Brass main part and zinc handle Drainage: Brass with chrome Main hariware (Handle and Tower Bar): 304 SS material Ordonnance 1) Message Function 2) Air Switch 3) Shower 4) Golf Waterfall 5) Dream Pillow 6) Commodity Shelf 7) Towel Bar 8) Sprays in Handle Optional Accessaries 1) Faucet Alternatives 2) Drainer Alternatives Supply Ability: 1000 Set/Sets per Month Payment Price: $ 390-410/set ( Based on FOB Ningbo and quantity of 40 HQ container) Term: 30% T/T in advance + 70% after seeing the copy of bl or L/C at sight MOQ: 5pcs/design, 40HQ for mixed container Packaging & Delivery Packaging: 1) Protective foam against the products, ploy foam board between the products and the carton, outside carton wrapped with EPE belt. 2) Outside carton reinforced by wood frame. 3) KD packing in separate which customer will assemble them in their place. Port: Ningbo or Shanghai Lead Time: Shipped in 35 days after receiving deposit or L/C Quality Guarantee 1) 1% main spare parts freely with the items in the order before shipped. 2) Tub body: 5 years ( leakage/scratches and natural damage) 3) Water system: 3 years 4) Electric system: 1 years 5) Metal parts: 3 years 6) Message water pump & Heater: 5 years
Apple pure 10 12 brix, 28 32 brix, apple concettrate 68 72 brix, apple juice cold press pasterised filtred clear or unfiltred, tomato paste 28 32 brix.
