Borescope Name: portable flexible video borescope with integrated monitor Model: tp1000 Insertion Tube & Light Source SPECs 1. Image Sensor: CMOS Image Sensor 2. Resolution (Dynamic / Static): 320(H)*240(V) 3. Size Tip (Insertion Tube) Diameter: 5.5mm 4. Insertion Tube Length: 1-30M 5. Frame Rate: -30 fps 6. S/N Ratio: 42dB 7. Exposure: Automatic 8. White Balance: Fix 9. Field of View (FOV): 57/91¡ã 10. Depth of Field (DOF): 2 cm to infinity 11. Light Source: 4 White LEDs. System SPECS 1. Power: DC5V 2. Display: 3.5"TFT LCD Monitor 320*240 Pixels 3. Interface: Mini USB 1.1/ AV out/ AV in/ 4. Battery: Rechargeable Li-Polymer Battery (3.7V) 5. Video Out Format: NTSC 6. Recording Medium: SD card (capacity can be up to 32G) 7. Compression Format: MPEG4 8. Still Image Storage Format: JPEG (640*480) 9. Video Recording Format: AVI (320*240) 10. Language: English /Optional 7 language.
OD, Length, Articulation, Bending angle, Model: 4.5mm, 1meter, 2-way, 170, TP1000AS451 5.5mm, 1~3meter, 2-way, 120~170, TP1000-AS551 Insertion Tube & Light Source Specs: 1. Image Sensor: CMOS Image Sensor 2. Resolution (Dynamic / Static): 320(H)*240(V) / 640(H)*480(V) 3. Size Tip (Insertion Tube) Diameter: 5.0mm (0.196") 4. Insertion Tube Length: 1M-30M 5. Frame Rate: -30 fps 6. S/N Ratio: 42dB 7. Exposure: Automatic 8. White Balance: Fix 9. Field of View (FOV): 91° 10. Depth of Field (DOF): 1.5cm~10cm 11. Light Source: 6 White LEDs. System Specs: 1. Power: DC5V 2. Display: 3.5"TFT LCD Monitor 320*240 Pixels 3. Interface: Mini USB 1.1/ AV out/ AV in/ 4. Battery: Rechargeable Li-Polymer Battery (3.7V) 5. Video Out Format: NTSC & PAL 6. Recording Medium: SD card (capacity can be up to 2G) 7. Compression Format: MPEG4 8. Still Image Storage Format: JPEG (640*480) 9. Video Recording Format: ASF (320*240) 10. Language: English. Function: Quick Video Recording Quick Snap Quick Review AV Out Video Viewer.
Optics System Outer Diameter of Tip:5mm-8mm Outer Diameter of tube:5mm-8mm Working Length:500mm-2000mm Total Length:634mm-2034mm Weight:370g-500g Packing:326mm¡Á237mm¡Á70mm Side View Tip:6mm(Optional) Battery:3aaa Side View Details Field Of View:90, Direction Of View:30,/45,/60, Focal Range:30mm-150mm.
System Spec Camera outer diameter: 10mm Cable length: 80cm Cable outer Diameter: 9mm Image Sensor: 1/6''VGA Color CMOS sensor Monitor size: 2.5inch LCD Video format: PAL/NTSC Resolution: 640(H)*480(V) S/N Ratio: 52db Depth of field (DOF):3cm to Infinite Field of View (FOV): 57degree Light source: 4LEDs Power: 4 dry batteries Working temperature: (-2 to +55) Function 1.Three times Zoom 2.Live inspection
Precision rak series motorized rotation stages provide high-precision angular positioning accuracy, we offer three stage sizes (100, 200, 350mm diameter) enabling a variety of operation conditions for optimizing load capacity, torque, speed and resolution. Backlash-free continuous rotation; Compact, low-profile Crossed roller bearing provide smooth rotation and low wobble Monolithic design ensures high structural stiffness Optical rotary encoder is optional.
Ksaxxx-11/12 series motorized translation stages are the newly developed successors of our popular tsa series. They feature high motion linearity and robust frame providing high precision and load capacity, and are the recommended choice for 3d laser fabrication, femto-second laser and other applications.
The mc600 motion controller is a new multi-functional, performance and cost-effective product for measurement and position control. Mc600 series are designed for motorized stages++++motorized rotation stages and motorized goniometric stages. Mc600 can control 4-axis / 2 axis position of point-to-point movement system. Excellent performance of the built-driven stepper motor driver or ac servo motor driver. Simplified installation and improved reliability. Friendly interface, a wealth of function parameters. Flexible command-line communication, to make system integration easier and efficient. Three-axis linear interpolation and two-axis circular interpolation can be achieved.
Specifications Travel range: +/-12.5mm Table size: 65x65mm Overall thickness:23mm Flatness:++10++m Pitch++30fs Yaw++20fs Weight : 5kg .
Axes adjustment : Xy axes Travel range (mm) : 13 Swing error : ++30+s Driver : micrometer Graduation(mm) : 0.01 Sensitivity(mm) : 0.001 Max. Load capacity (kg) : 7 Weight (kg) : 0.4.
Movement of optical tubes: Horizontal:adduction + 50deg Abduction - 40 deg Vertical:hyper 30 deg Hypo 30 deg Torsional:incyclo 20 deg Excyclo 20 deg Slide illumination:- By rheostat controlled 6v lamp for each slide. After image illumination by 6v lamp Auto flashing:- Auto flashing of slide illumination either simultaneously or alternatively in rapid & variable modes Mode & mode selection: Five modes of slide illumination namely normal, flashing right, flashing left, flashing r+ l & auto flashing can be selected by a single selector knob. Dimensions:- Longitudinal: 30.3 cms Lateral: 25.5 cms Vertical: 36.5 cms Weight: 20 kgs Power supply: 220 v ac / 110v Standard accessories:- A set of slides containing 9 pairs, one power cord, one dust cover, spare 6v bulbs (2 nos) Optional accessories:- Instrument table: manual or motorized Haidinger brush attachment.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Fusion splicer pt-650 Features Equel to fujikura fsm-50s, sumitomo type-37 etc Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interfac Specefication Model Pt-650 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500
Fusion splicer pt-660 Features Color lcd monitor and 256x magnification Compact and lightweight Reversible monitor with control panel on each side Maximum wind velocity: 15m/s 8sec splice time, 40sec tube-heat time Simultaneous x and y views Large capacity internal battery System test: ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8, 000 groups of splice results Multiple language options Specification Model Pt-660 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 8 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 8(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Usb 1.1 and vga Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 170mm(l) x170mm (w) x140mm (h) Weight 2.7 kg excluding battery, 3.3 kg including battery
2D optical measurement instrument Machiner Properties: Saving over thousands of specifications, simply one lesson will do, easily click to load the related setting data. Rapid measurement and the measurement result can be able to save for analysis or inquiry purpose. Well apply to at-site inspection, sampling inspection for Q.C. and before delivery. Inspection items: 1.Hole diameter 2.Diameter 3.Concentricity 4.Roundness 5.Straight line distance 6.Center distance 7.Straightness 8.Perimeter 9.Area .
Rotatory glass plate optical sorting machine Machine's Character: * Measurement for simultaneous top/bottom inspection. * Also suitable for tiny electronic parts. Adaptable Product: O-ring, seal, packing and product can stand stably on the glass surface. Inspection items: 1.Hole diameter 2.Concentricity 3.Thickness 4.Crack 5.Color 6.Surface Stain 7.Bubbles 8.Burrs.
Fastener, nuts sorting machine Machine's Character: * Variety of inspection modules satisfied for the most of inspect needs. Adaptable Product: Nuts, rivet, roller, washer, stud, set screws and products can stand stable on the belt. Inspection items: 1.Thread 2.With coating 3.Hole diameter 4.Outside diameter 5.Concentricity 6.Roundness 7.Overall height 8.Deformed 9.Crack 10.Marking 11.Width/length 12.Thickness.
Rotatory plate optical sorting machine Machine's Character: * Quick & easy to chnage different specifications. * Friendly interface for setting measurement items. Adaptable Product: Screws, rivet and product can be hung well on the plate. Inspection items: 1.Roundness 2.Major diameter 3.Minor diameter 4.Spiral angle 5.Pitch 6.Necks down length 7.Included angle 8.Head thickness 9.Head diameter 10.Head crack 11.Hole diameter.
Eddy current sorting machine Inspection items: 1. Recognition of hardness difference , accurancy 2 HRC ( +/- 1HRC) 2. Recognition of different metal material mixed. 3. Same size with similar material parts mixed 4. With/without high frequency harding difference. 5. Dimension measurement of appearance by laser or optic ( extra optional) 6. crack sorting (extra optional).
Standard lot
Optical calcite crystal (iceland spar) both in raw material and semi-finished form or finished form (such as polarizers, waveplates, etc.) ready to be used as per customer's dimension or detail technical specified. Typical products are rhombohedral shapes, rectangles and rounds, shaped plates, wedges, and cubes It is carefully selected to eliminate small inclusions, cleavage planes, cloud and mist, point defects and bubbles inside the crystal. It is known for its properties of transparency and double refraction, used chiefly in the manufacture of polarizing prisms, which are essential parts of polarization components and other special optical instruments.
