Long Boot Leg Workshop Esd Boots Safety Shoes Suppliers and Manufacturers

KUBBA Tactical 6.0 Police waterproof 6.0 boots Steel toes safety shoe 6.0  boots . Upper: Top grain cow leather  Nylon fabric Lining: Nylon fabric Footbed: PU Sole: Rubber

This one-dip cleaning machine can carry a few liters of liquid detergent for your shoes to soak in. Scrub your dusty boots on their disinfecting bristles for a pristine appearance! Hirange is one of the top rubber boot dip mats suppliers in India. Size : 98*81*4.69cm, 80*60*3.0cm, 40*60*3.0cm Product Information These mats have great liquid retention and a long lifespan. This makes them ideal for usage at entrances where preventing the transmission of germs is critical. Our sanitising boot dip mats are available in three sizes: 98*81*4.69cm, 80*60*3.0cm, and 40*60*3.0cm. They also have a deep well designed specifically for the retention of liquids and disinfectants. This is why the mats are called boot dips. These mats also include a dimpled well base that has been specifically designed to catch undesired liquid and dirt from the shoes bottom. Each of our rubber boot dip mats has a beveled safety edge that runs around the outside of the mat. This significantly decreases possible tripping dangers, resulting in a safer working environment overall. These mats come in all-black or black with a bright yellow safety edge for increased visibility. Features include: ease of maintenance, UV resistance, and a long life. Other information: Raised wall features can be used to store anti-germ detergent or any other disinfection liquid for hygienic cleaning. Thousands of rubber bristles help to clean and trap dirt in boots. The rear grip design secures the mat to the floor. The mats yellow, green, and orange edges make it highly visible. Clean, Disinfect & Sanitize : Latest edition shoe disinfection mat. Rubber boot dip mats have produced a high-quality, high-performance shoe sanitizer mat that achieves the greatest cleaning, disinfecting, and sanitizing effects. At the entryway, greet your guests and polish your shoes. Indoor And Outdoor Use : Rubber boot dip mats are versatile pieces that may be installed at any doorways entrance. Use as both an interior and outdoor doormat. Use our sanitizing mat to disinfect all varieties of shoe bottoms, from the dirtiest boots to the most expensive office shoes. Safe and Non-Slip : Rubber boot dip mats offer a double non-slip design and a strong grip on the ground to avoid slipping. Anti-slip plugs are located at the four corners to improve the overall stability index and give additional protection for the elderly and children. Installation is Simple And Quick: The product equipment is preassembled, and instructions are given to explain how to assemble the parts for immediate use. To minimize bacterial infections, soapy water or disinfectants should be used. Place a sanitizing shoe mat in your favorite entryway

Item No.: 2058-06 Size : 39 - 46 (5-12) Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number: 2058-06 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Repellant Buff Waxy Lining : Soft Buff Leather Toe : Steel Footbed / Socks: Padded Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and co

Item No.: 2058-11 Size : 39 - 46 (5-12) Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S2 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number : 2058-11 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell Lining : Soft Buff Leather Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No .: 2080 - 68 Size : 36 - 47 (5-13) Soles : 2080 Dual Density PU SAFETY FEATURES Steel Toe Cap Oil Resistant Shock Absorber Anti Static Insole Anti Skid ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 36-47 (5-13) Colors : D Grey AVAILABLE OPTIONS Product Number : 2080-68 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual Or Mono Color : D Grey / Blue / Tan MATERIALS Upper : Water Repellant Nubuck, Suede and Breathable Textile Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Padded Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No. : 7198 - 330 Size : 39 - 48 (5-14) Soles : 7198 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Clog Standard : S1 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 330 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown / White MATERIALS Upper : Water Repellant Smooth Haircell Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No .: 7198-354 Size : 39 - 48 (5-14) Moq : N/A Soles : 7198 Dual Density PU SEND ENQUIRY SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 354 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell & Helcore Lining : Soft Buff Leather White Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 2058-58 Size : 39 - 46 (5-12) Moq : N/A Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 39-46 (5-12) Colors : Tan AVAILABLE OPTIONS Product Number: 2058-58 STANDARD: S1, S1P, S2, S3 Toe: Steel MIDSOLE: Steel Sole: Mono COLOR: Black / Brown MATERIALS UPPER: Water Repellant Nubuck & Cow Leather LINING: CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No. : 2058-07 Size : 39-48 (5-14) Soles : 2058 Single Density PU sole SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Shoes Standard : S1P Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 2058-07 Standard: S1, S1p, S2, S3 Toe : Steel Midsole : Steel/Metal Free Sole : Mono Color: Black /brown MATERIALS Upper : Haircell Smooth Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : 2058 Single Density PU sole Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 3003-98 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Heat Resistant Sole Oil Resistant Shock Absorber Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Shoe Standard : S1 Sizes : 36 - 48 Colors : Green AVAILABLE OPTIONS Product Number : 3003-98 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual Or Mono Color : As per pic MATERIALS Upper : Water Reppellant Suede, Smooth Leather and Mesh Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No .: 3003-99 Size : 36 - 48 Soles : 3003 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Heat Resistant Sole Oil Resistant Shock Absorber Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety shoe Standard : S1 Sizes : 36 - 48 ColorS: Tan AVAILABLE OPTIONS Product Number : 3003-99 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : As Per Pic MATERIALS Upper : Water Reppellant Nubuck, Helcore and Cordura Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No .: 3002-75 Size : 36 - 47 (5-13) Moq : N/A Soles : 3002 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Heat Resistant Sole Oil Resistant Shock Absorber ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 36 - 47 (5-13) Colors : Blue AVAILABLE OPTIONS Product Number : 3002-75 Standard : S1, S1P, S2, S3 Toe : Steel /Composite Midsole : Steel /Metal Free Sole : Dual or Mono Color : As per pic MATERIALS Upper : Water Reppllant Soft Smooth and Suede Learher , Mesh and Reflector Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3002 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet *Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No .: 3003-25 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Oil Resistant Shock Absorber Steel Midsole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003 - 25 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Suede and Cordura Lining : 3D Textile, Breathable, Ensures good Ventilation and greater comfort Toe : Composite Midsole : Non Metallic -Zero Penetration Footbed / Socks : Cambrella and EVA Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.

Item No.: 3003-106 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Heat Resistant Sole Oil Resistant Shock Absorber Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 36 - 48 Colors : Blue OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 36 - 48 ColorS: Blue AVAILABLE OPTIONS Product Number : 3003-106 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : As per pic MATERIALS Upper : Water Reppellant Suede and Helcore Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet.