Product name: Piroctone olamine INCI Name: PIROCTONE OLAMINE Molecular Formula: C16H30N2O3 Molecular Weight: 298.42 Appearance: White fine powder Purity: 99% CAS NO.: 68890-66-4 EINECS No.: 272-574-2 Supplier: ZHENYIBIO Piroctone olamine is an anti-dandruff active ingredient that soothes inflamed scalp and reduces flaking.Olamine piroctone has a special effect on Pityrosporum Ovale,which is responsible for the production of dandruff.Anti-dandruff products containing piroctamine eliminate fungal infections that cause dandruff and combat the formation of new dandruff,keep the scalp clean,free of itching and prevent the formation of new dandruff.After six weeks of treatment,the use of dandruff was reduced by 81.7%.Shampoo containing 0.5% pyrrolidone hydroxylamine and 68.6% 0.5% zinc pyrithione shampoo.Piroctone olamine uses as a broad-spectrum bactericide/bacteriostatic agent,which can be used to formulate anti-dandruff shampoo,hair care,hair loss,soap,etc.
Product name: Octocrylene INCI Name: OCTOCRYLENE Molecular Formula: C24H27NO2 Molecular Weight: 361.48 Appearance: Viscous light yellow clear oily liquid Purity: 95.0%ï½?105.0% CAS NO.: 6197-30-4 EINECS No.: 228-250-8 Supplier: ZHENYIBIO Octocrylene is a transparent colorless oily liquid.In cosmetics and personal care products,Octocrylene is used to formulate sunscreen products as well as skin and nail care products.When applied to the skin,it absorbs ultraviolet rays.Sunburn and ultraviolet radiation are an important cause of premature skin aging and contribute to the development of melanoma and other forms of skin cancer.Octocrylene can also be used to protect cosmetics and personal care products from deterioration due to UV absorption.
Other Name: Potassium Azeloycinate Diglycinate INCI Name: POTASSIUM AZELOYL DIGLYCINATE Molecular Formula: C13H22N2O6�·K Appearance: Colorless to light yellow transparent liquid Purity: 98% CAS NO.: 477773-67-4 Application: cosmetics and skin care products Supplier: ZHENYIBIO Potassium azeloyl diglycinate is a water-soluble azelaic acid diamine salt which improves the technical characteristics of the formulation. Azelaic acid itself has poor water solubility,but it is present in many grain proteins and is a beneficial component of the skin. Azelaic acid in the skin is an inflammatory signaling compound that can induce the production of salicylic acid. Potassium azeloyl diglycinate derivatives are safe,efficient and multifunctional cosmetic ingredients.As potassium diamine salt, potassium azelayl diglycinate is a new ingredient, which solves many formulation difficulties of azelaic acid.Potassium azeloyl diglycinate is water-soluble, less dosage and strong anti-inflammatory effect.
Polyquaternium-51 INCI Name: POLYQUATERNIUM-51 Molecular Formula: C19H36NO8P Molecular Weight: 437.47 Appearance: Colorless transparent liquid Purity: 98% CAS NO.: 125275-25-4 EINECS No.: 433-120-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Polyquaternium-51 (Polyquaternium-51) chemical name: methacryloxyethyl phosphorylcholine-n-butyl methacrylate, is a synthetic bionic material of cell membrane structure, with phospholipids in the cell membrane The polar group of acylcholine is a copolymer composed of 2-methacryloyl hydroxyethyl phosphatidylcholine (MPC) and monomeric hydrophobic butyl methacrylate. Polyquaternium-51 has super moisturizing properties, its moisturizing properties are twice that of hyaluronic acid, and can alleviate the irritation of surfactants, so it is widely used in cosmetic moisturizer raw materials and medical aesthetics. Polyquaternium-51 is an efficient and mild moisturizing factor with excellent water-locking and moisturizing properties. It can effectively lock the moisture of the skin and hair, and its moisturizing properties will not be reduced after multiple washings. After the product containing polyquaternium-51 is applied, its ingredients can form a respirable biofilm on the surface of the skin, which simulates the stratum corneum to give the skin an extra layer of protection, effectively inhibits the irritation of surfactants on the skin, and can Improve rough skin, smooth and delicate skin, and enhance the skin's absorption of active ingredients.
Other Name: 1,3-Dihydroxyacetone, DHA INCI Name: DIHYDROXYACETONE Molecular Formula: C3H6O3 Molecular Weight: 90.08 Appearance: White crystalline powder Purity: 98% CAS NO.: 96-26-4 EINECS No.: 202-494-5 Application: cosmetics and skin care products Dihydroxyacetone, also called glycerone, is a common active ingredient in sunless tanning creams or sprays. As a single carbohydrate, dihydroxyacetone is extracted from sugar beet or sugar cane, or produced through the fermentation process of glycerol. Using dihydroxyacetone to change skin tone is considered a healthier choice than sun tanning or commercial tanning beds. Although this carbohydrate does not damage the skin itself, it is still harmful to health. Within 24 hours of application, the skin becomes highly sensitive and vulnerable to sun damage. During this period, users are advised to take sun protection measures and stay indoors as much as possible.
Other Name: Deoxyarbutin INCI Name: TETRAHYDROPYRANYLOXY PHENOL Molecular Formula: C11H14O3 Molecular Weight: 194.23 Appearance: White crystalline powder Purity: 98% CAS NO.: 53936-56-4 EINECS No.: 1308068-626-2 Application: cosmetics and skin care products Deoxyarbutin inhibits the activity of tyrosinase reversibly,and has a significant blocking effect on the formation of melanin in the skin. Deoxyarbutin can effectively inhibit tyrosinase in the skin tissues, quickly and effectively make the skin white, and when you stop using the ingredient, the effect can still be maintained for nearly 8 weeks, and its effect is even correct. It is 10 times that of hydroquinone, 350 times that of �²-arbutin, and 38.5 times that of the currently popular �±-arbutin. Main Function: As a competitive tyrosinase inhibitor, deoxyarbutin can regulate the production of melanin, overcome pigmentation,lighten skin black spots, and has a rapid and long-lasting skin whitening effect. The inhibitory effect of deoxyarbutin on tyrosinase is significantly better than other whitening active agents, and it can show whitening and brightening effects with a small amount of use. Deoxyarbutin also has a strong antioxidant effect. Usage: Deoxyarbutin is a new generation of cosmetic brightening and whitening active agent, mainly used in advanced whitening cosmetics.It can effectively inhibit tyrosinase activity, regulate the production of melanin, overcome pigmentation,lighten skin black spots, and has a rapid and long-lasting effect of skin whitening effect.Deoxyarbutin also has a strong antioxidant effect.The inhibitory effect of deoxyarbutin on tyrosinase is significantly better than other whitening active agents.The whitening effect is 350 times that of arbutin, 150 times that of kojic acid, and 10 times that of hydroquinone.Compared with the former, it is safer High, more stable, not only non-toxic and non-irritating to the skin, but also easily absorbed by the skin. It can show whitening and brightening effects with a small amount of use. It is considered a very safe cosmetic whitening active agent.
Calcium Acetate Monohydrate, E263, CAS no. 5743-26-0, calcium salt of acetic acid, s a white, odorless, and tasteless crystalline powder. Also known as Calcium acetate, manufacturing process via chemical synthesis, calcium carbonate and acetic acid as raw materials. Calcium Acetate Monohydrate is mainly used in the production of candy products, desserts, and baked good (bread, cakes, pastries). As an experienced Calcium Acetate Monohydrate manufacturer and supplier, we has been supplying and exporting Calcium Acetate Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Calcium Acetate powder Specification Product Calcium Acetate CAS anhydride :62-54-4; monohydrate :5743-26-0 INS 263 EINECS 200-540-9 EEC E263 Structure Molecular formula 1.Anhydrous:Ca(C2H3O2)2 2.Hydrates:C4H6CaO4H2O 3.C4H6CaO4xH2O(x
Product Name: Melatonin Molecular Formula: C13H16N2O2 Molecular Weight: 232.28 Appearance: white to off-white powder Purity: 99% CAS Number: 73-31-4 EINECS number: 200-797-7 Supplier: ZhenYiBio Melatonin is a hormone produced by the pineal gland (small glands in the brain).It helps to control the cycle of your sleep and wake.Trace elements found in foods such as meat, cereals, fruits and vegetables are very abundant. Your body has its own internal clock which controls your natural sleep and wake-up times.In part,your body clock controls the amount of melatonin in your body.Usually,it starts to rise from noon to early evening, maintains a high level throughout the night, and then falls in the early morning.The lights affect the amount of melatonin produced in your body.In the short period of winter,your body may produce it earlier or later than usual. This changes may cause symptoms of seasonal affective disorder (SAD) or winter depression.
Product Name: Oligopeptide-68 Other Name: Glycyl-L-arginylglycyl-L-alpha-aspartyl-L-tyrosyl-L-isoleucyl-L-tryptophyl-L-seryl-L-leucyl-L-alpha-aspartyl-L-threonyl-L-glutamine Molecular Formula: C62H91N17O21 Molecular Weight: 1410.49 Appearance: White powder Purity: 99% CAS Number: 1206525-47-4 EINECS Number: 205-358-3 Standard: Enterprise Standard Supplier: ZhenYiBio Oligopeptide-68 is a new type of whitening material, inspired by the role of TGF-�² and MITF in the formation of melanin. Its unique mechanism is that oligopeptide-68 mimics the binding of TGF-�² to receptors on the cell surface, and reduces induced and hereditary pigmentation by inhibiting MITF intramolecular channels to achieve the effect of whitening and brightening the skin. 1) Reduce the number of molecules related to melanin formation, such as MITF, TRP-1, TRP-2 and tyrosinase. 2) Inhibit tyrosinase activity and melanin synthesis.
Product Name: Tretinoin Other Name: Retinoic acidï¼?VITAMIN A ACID INCI Name: RETINOIC ACID Molecular Formula: C20H28O2 Molecular Weight: 300.44 Appearance: Yellow powder Purity: 98% CAS Number: 302-79-4 EINECS number: 206-129-0 Supplier: ZHENYIBIO Retinoic acid (Tretinoin) is a derivative of vitamin A.So it also been called Vitamin A acid(Retin-A).Retinoic Acid can be used on the skin (topical) to treat moderate to moderate acne, as well as on skin that has been damaged by excessive exposure to the sun.Tretinoin powder can be used for removing moderate acne,wrinkles and spots in the skin. Tretinoin may bring the following benefits:Reduce the appearance of fine lines and dark spots; Improve skin texture;Reduce the frequency and severity of acne outbreaks;Clean up existing acne.
Product Name: Kojic acid INCI NAME: KOJIC ACID Molecular Formula: C6H6O4 Molecular Weight: 142.11 Appearance: White Crystalline Powder Purity: 99% CAS Number: 501-30-4 EINECS number: 207-922-4 Supplier: ZHENYIBIO Kojic acid powder is a special melanin inhibitor.After entering the skin cells,it can prevent the activity of tyrosinase by synthesizing with copper ions in the cells.The inhibitory effect of kojic acid and its derivatives on tyrosinase is better than any other skin whitening agent.Currently,it is distributed in various cosmetics for the treatment of freckles,spots on the skin of the elderly,pigmentation and acne.Kojic acid serum can also eliminate free radicals,enhance cell activity,and keep food fresh.Pure kojic acid also has antibacterial and antifungal properties.Kojic acid uses in Cosmetics: kojic acid skincare has been widely added to lotions, facial masks, liquid creams and skin creams. Recommended dosage of cosmetics: 0.2-1.0%.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional 5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform 9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries 10. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
Citrus & Apple Pectin powder, E440, CAS no.9000-69-5, Pectin is used as a gelling agent in a wide range of fruit-based products, such as jams, marmalades, jellies, fruit preparations for yoghurts and desserts and fruit filling for bakery products. Pectin is used in confectionery jellies to give a good gel structure and a clean bite. The typical dosage of pectin in food applications is between 0.5 â?? 1.0%. As an experienced Citrus & Apple Pectin manufacturer and supplier, we has been supplying and exporting High methoxyl pectin, DE (Degree of methyl Esterification ) higher than 50 and low methoxyl pectin pectin, DE lower than 50 food grade. for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. High methoxyl pectin/Low methoxyl pectin Specification Degree of esterification >50 or 65 % pH of 1% solution 2.8-3.3 Loss on drying, %
