Photonchinas beamsplitters are used to split or combine beams of light. Plates are used for most laser applications as they exhibit low absorption. Cubes are a convenient, protected form for low power applications. The performance of a beamsplitter is mainly dependent on the coating specifications. Non-polarizing beamsplitter (high power NPBS) is a kind of special polarizing beamsplitter. It makes the p-polarization component and S- polarization component of incident light have similar spectral characteristics.
Photonchinas wollaston polarizer can separate an incident beam into two rays: extraordinary and ordinary ray with a deviation angle which is dependent on wavelength. Both rays are transmitted through the other surface. Specifications: Material: a-BBO, Calcite ,YVO4,Quartz Wavelength Range: a-BBO:190-3500 nm, Calcite:350-2300 nm, YVO4:400-5000 nm,Quartz:200-2300 nm Extinction Ratio: Calcite,Quartz:
Achromatic lenses are normally made of BK7, fused silica and CaF2. Special focusing systems can be designed by Photonchinaâ??s engineer team. Sizes from smallest diameter of 3mm to biggest of over 100mm are all available. Normal Achromatic Lens Super Small Achromatic Lens Super small Achromatic Lenses for your specific application provide excellent wavefront quality, super small spot size and improved modulation transfer function (MTF). Feature Small diameter size up to 3mm Short focal length, such as 5mm Strict quality control, excellent quality AR-coating, mounts services
Photonchina has been focusing on dove prism manufacture for more than decades in order to meet demands of customers worldwide in applications ranging from image displaying to fiber communications. Dove prism is a type of reflective prism which is used to invert an image. These prisms are shaped from a truncated right-angle prism. A beam of light entering one of the sloped faces of the prism undergoes total internal reflection from the inside of the longest (bottom) face and emerges from the opposite sloped face. Images passing through the prism are flipped, and because only one reflection takes place, the image's handedness is changed to the opposite sense. If you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal performance, you may use dove prisms with collimated light. The top surface of each dove prism is ground and the longest length features an unbeveled sharp edge. Dove Prisms are offered uncoated, with anti-reflection coated diagonal faces, or with aluminized diagonal faces. Aluminized dove prisms feature a protected aluminum coating with black Krylon paint on the diagonal faces and are ideal for displaced retroreflection. They provide a u-turn for incident laser beam light.
Achromatic Waveplate Achromatic waveplate is made from two different substrate materials such as crystal quartz and magnesium fluoride. For the single material,waveplateâ??s working wavelength is very limited because of the dispersion of the material. But Achromatic Waveplate uses two different kinds of materials,with the different dispersion, such waveplate is not sensitive to the wavelength change. Dual Wavelength Waveplate Dual wavelength waveplate is a special type of multiple waveplate that provides a specific retardance at two different wavelengths, itâ??s particularly useful when used in conjunction with other polarization sensitive components to separate coaxial laser beams of different wavelength. It is widely used to improve conversion efficiency in solid double frequency laser device. Polarization Rotator Due to the rotation activity of natural quartz crystal, it also can be used as polarization rotators so that the plane of input linearly polarized beam will be rotated at special angle which is determined by the thickness of quartz crystal.
Wavepalte Types: Photonchinas waveplates include octadic waveplate (1/8 waveplate),quarter waveplates(1/4 waveplate), half wave plates(1/2 waveplate) and full waveplate Both circular aperture and quadratic aperture are available. Photonchinaâ??s waveplate can transmit light and modify its polarization state without attenuating, deviating, or displacing the beam.It is ideal for applications requiring high damage thresholds and retardation stability over temperature change, such as for use with lasers or infrared light sources.
Product description Onick VISTAS 12x50 binoculars are built with multi-purpose functionality and a lightweight, ergonomic design. These binoculars are perfect for those looking for extremely versatile, high quality, and economically priced optics. TheVISTAS 12x50 binoculars deliver high-end magnification as well as large 50mm objectives and are light enough to be carried with ease to any outing or event. Built to last with eco-safe components and designed to perform in a variety of conditions, the VISTAS 12x50 binoculars are sure to bring you even closer to the action and give you an experience nothing short of incredible, all at a very affordable price. The BaK4 Porro prism systems within all VISTAS 12x50 binoculars deliver a high quality image under a multitude of lighting conditions, making these binoculars effective from dawn till dusk for a variety of pursuits, including sporting events, nature watching, travel and hunting. 1. The VISTAS 12x50 binoculars are designed to be as light as possible along with excellent ergonomics. 2. Turn-and-Slide Rubber Eyecups allow for comfortable viewing during extended periods of use. 3. Made with A spherical Multicoated Eco-Glass Lenses bright and clear images in most lighting conditions. 4. The smooth central focus knob makes these binoculars simple to operate and easy to focus. 5. A durable rubber-armored coating ensures a non-slip grip, even in wet conditions. 6. IPX6 protection level Product information Model Onick VISTAS 12x50 binoculars Magnification 12x Body material Aluminum alloy Armor material NBR+PVC Color black Objective lens 50 ± 1mm Ocular lens 23.5 ± 1mm Exit pupil 4.1mm ± 10% Exit pupil distance (mm) 18mm Field of view 6.5 Field of view (at 1000M) 143m Field of view (at 1000yds) 342ft Near focusL 5m Diopter system Right diopter ring Interpupillary distance 56 73mm Focus System Center Focus Focusing len Eye. Diopter compensation -4 To +4 Diopter Focusing Adjustment -4 To +8 Diopter Prism System Paul prism Prism Glass Material BaK4 Objective lens 2E1G Ocular lens 4E3G Lens Type Spherical Len Spherical Lens Optical Material All optical glass Lens coating Full broadband green film Water/Fogproof Yes Gas Filled Nitrogen Protection level IPX6 nitrogen-filled waterproof Eye cup Twist up Adapt to tripod Yes size LxWxH 196x66x183mm Weight approx 969g
Product description Onick VISTAS 10x50 binoculars are built with multi-purpose functionality and a lightweight, ergonomic design. These binoculars are perfect for those looking for extremely versatile, high quality, and economically priced optics. TheVISTAS 10x50 binoculars deliver high-end magnification as well as large 50mm objectives and are light enough to be carried with ease to any outing or event. Built to last with eco-safe components and designed to perform in a variety of conditions, the VISTAS 10x50 binoculars are sure to bring you even closer to the action and give you an experience nothing short of incredible, all at a very affordable price. The BaK4 Porro prism systems within all VISTAS 10x50 binoculars deliver a high quality image under a multitude of lighting conditions, making these binoculars effective from dawn till dusk for a variety of pursuits, including sporting events, nature watching, travel and hunting. 1. The VISTAS 10x50 binoculars are designed to be as light as possible along with excellent ergonomics. 2. Turn-and-Slide Rubber Eyecups allow for comfortable viewing during extended periods of use. 3. Made with A spherical Multicoated Eco-Glass Lenses bright and clear images in most lighting conditions. 4. The smooth central focus knob makes these binoculars simple to operate and easy to focus. 5. A durable rubber-armored coating ensures a non-slip grip, even in wet conditions. 6. IPX6 protection level Product information Model Onick VISTAS 10x50 binoculars Magnification10x Body material Aluminum alloy Armor materia NBR+PVC Color black Objective lens 50 ± 1mm Ocular lens 23.5 ± 1mm Exit pupil 4.1mm ± 10% Exit pupil distance (mm) 18mm Field of view 6.5 Field of view (at 1000M) 155m Field of view (at 1000yds) 342ft Near focusL 5m Diopter system Right diopter ring Interpupillary distance 56 73mm Focus System Center Focus Focusing lens Eye. Diopter compensation-4 To +4 Diopter Focusing Adjustment-4 To +8 Diopter Prism System Paul prism Prism Glass Material BaK4 Objective lens 2E1G Ocular lens 4E3G Lens Type Spherical Lens Spherical Lens Optical Material All optical glass Lens coatingï¼?Full broadband green film Water/Fogproofï¼?Yes Gas Filledï¼?Nitrogen Protection levelï¼?IPX6 nitrogen-filled waterproof Eye cupï¼?Twist up Adapt to tripodï¼?Yes sizeï¼?LxWxHï¼?ï¼?196x66x183mm Weight approxï¼?969g
Strong Cable & Hose Carrier Strong Cable Carrier, Strong Hose Carrier, Cable Drag Chain Manufacturer Inside height=7/8/10/15/18mm,Inside width =7mm~50mm.(unit:mm) Size Inside H*W Outside H*W Bending radius Supporting TLZ070 40*W(80~400) 69*W+38 75/100/130/180/230 Aluminum rod TLZ080 47*W(80~400) 79*W+41 150/200/250/280/400 Aluminum rod TLZ100 70.5*W(100~600) 106*W+54 200/250/300/350/400/500 Aluminum rod TLZ150 111*W(200~800) 160*W+63 200/300/400/500/600 Aluminum rod Note 1. Length under 7meters can be used as usual 2. Length upon 7meters per piece should be added supporting rollers or guide groove. 3. Bridge type only This series cable drag chain is the KING among plastic ones, strong structure with aluminium intermediate studdle , and you can get any width as you like, also, the lower price than steel one, there is no doubt it can be the KING among the plastic cable drag chain.
Specifications Type: interior lamp Voltage: 10-30v dc Lamp type: led Certification: r10 ece emc rohs ce ip67 iso9001 Car make: automotive cars room house transport boat truck offroad vehicles Place of origin: guangdong, china (mainland) Brand name: sanmak Model number: sm9101a Warranty: 2 years Product name: led interior lights for car Led color: natural white Lens: pc Size: 5.2" 130mm*18mm( thickness ) Wire length: optional Led chip: 24pcs 1w/chip Operating voltage: 10-30v dc Mounting: bracket Certifications: emc, ece, r10, ce, rohs, ip67 Material: adc12 alumium alloy housing
Optical system Finite color corrected optical system Head Monocular head 30°inclined, with locking system Binocular head 30°inclined, 360° rotatable with locking system, right eyepiece tube diopter adjustable, ±5D interpupillary distance 50-75mm Trinocular head,30°inclined, 360° rotatable, Interpupillary distance:50-75mm,beam splitting ratio R:T=5:5 Eyepiece Wide field plan eyepiece PL10X/18mm, reticle, pointer optional Objective Achromatic objective (4Xã??10Xï¼?40Xï¼?100X) Plan achromatic objective (4Xã??10Xã??20Xã??40Xã??100X) Nosepiece Reversed quadruple nosepiece Main body Low position coaxial coarse and fine adjustment, Coarse adjustment range 13 mm (double layer stage 7mm), precision of fine adjustment:2um with locking system 0.2W LED illumination (color temperature 5700-6500K), brightness adjustable. Battery charging system is optional input 100V-240V , output 5V 1A Stage Single stage, size 110mmÃ?120mm with two clips, single lens condenser N.A=0.65, five hole iris diaphragm plate Double layer mechanical stage: 115mmX125mm ABBE condenser N.A.=1.25, with iris diaphragm, with fish eye lens holder C mount 0.35X/0.5X/0.65X/1X C-mount, focus adjustable
Plastic Extrusion Profile,Plastic Extrusion PMMA (Acrylic) Profiles/Pipes,Plastic Extrusion Profile, Plastic Rods Factory  Plastic extrusion profile with beautiful appearance, multiple functions, simple operation and other advantages, and are widely used in light-fixture, decorative lighting, furniture, construction, kitchen cabinets, interior decoration, photo frames, automotive industry, electronics and other industrial and household items. Dongguan Riteng Industrial Co., Ltd was founded in 2008, is a customized manufacturer of plastic extrusion molding and injection molding, located in Qiaotou town Dongguan city Guangdong province China. The independent factory workshop covers an area of more than 5000 square meters with more than 100 employees. Our company has passed ISO9001 quality management system certification (certificate number: CI/134571Q) and SGS certification (certificate number: QIP-ASI172562). In our factory, there are more than 20 domestic and overseas advanced production lines of plastic extrusion molding and injection molding. Besides, we have own mold factory, we do not need to rely on other mold factory, and we have our own mold development technology to independently develop and manufacture plastic extrusion and injection mold , professionally produce all kinds of LED lampshade and tube, PC lampshade and tube, PMMA lampshade and tube, and a variety of PC/PP/PE/PS/PPO/PVC/PMMA/ABS/ASA/TPU/TPE/TPV/TPR/NYLON/PETG and other plastic extrusion profiles and pipes and plastic injection molding products. Our products have beautiful appearance, multiple functions, simple operation and other advantages, and are widely used in light-fixture, decorative lighting, furniture, construction, kitchen cabinets, interior decoration, photo frames, automotive industry, electronics and other industrial and household items. At present, our products have been exported to Japan, South Korea, Taiwan, Russia, the United States, Britain, France, Germany, Holland and other countries and regions. With many years export experiences, our Plastic Extrusion PMMA Tube, PMMA PiPE, PMMA Cover, PMMA Lamp Shade and Led Lens has been welcomed in international markets.  Custom Plastic Injection and Extrusion Is our main business. We can supply all kinds of plastic product such as Plastic Extrusion Led Tube, Plastic Extrusion PC Profile and PP Plastic Extrusion Profile according to your needs!Our company has passed ISO9001 quality management system certification and SGS certification. Want to know more, you can click here.
Optical glass ball lens, half ball lens, super hemisphere lens, sapphire ball, ruby ball, glass ball, monocrystalline silicon ball, yag crystal ball, quartz ball (jgs1, jgs2, jgs3), aspherical lens, hole jewel bearing, sapphire microhole, sapphire tube, jewel cup, jewel rod, jewel nozzle, sapphire window, ceramic components and other jewel assemblies..Export
Fused quartz from 200nm to 2.2um has high transmittance and low thermal expansion coefficient, which makes it an ideal choice for spherical lens in ultraviolet ray, visible light and near infrared spectrum applications with strict requirements. Spherical lens is commonly used to improve signal coupling between optical fibers, transmitters and detectors, as well as objective lenses in endoscopy and bar code scanning applications. Hemispherical lens simplify the integration of the whole system.
Low Tg Ball Lens has the characteristics of low melting and softening temperature, being easily shaped and special optical-mechanical properties, easy to be molded by secondary pressing, suitable for precision pressing of aspherical lenses, which helps to reduce the production cost of batch lenses. Low Tg Ball Lens / Aspherical Lenses are applied in precision molding, such as digital cameras, video cameras, mobile phones, etc.
Sapphire is a kind of corundum gemstone, its main characteristics are abrasion resistance, high hardness, corrosion resistance and low friction coefficient. It's the ideal material for precision instruments, machinery and bearings. Sapphire has good infrared penetration and chemical stability, and is widely used in all aspects of infrared military equipment, such as far infrared sight, night vision camera, etc.
Ruby is a kind of corundum gemstone, its main characteristics are abrasion resistance, high hardness, corrosion resistance and low friction coefficient. It's the ideal material for precision instruments, machinery and bearings.
Sjllaser Technology Limited manufacture micro ball lens ranges in diameter from 0.3mm to 3mm. Micro ball lens is used to improve signal coupling between Emitters, Fibres, Transmitters, Receivers and Detectors depending on the application. 1.Diameter Tolerance 0.001mm 2.Roundness less than 0.4um 3.Surface Quality is Ra10nm.
Sjllaser Technology Limited has developed a new product line! Diameter:0.4mm Diameter Tolerance: ±0.001mm Roundness less than 0.4um Material: Optical Glass H-K9L, N-BK7, K-VC89, K-VC80, L-LAH84, LASFH17
Sapphire crystal material, quartz, optical glass & raw material, sapphire series, quartz series, optical glass window, lens, crystal rods, prisms, blades, balls, filters, cylindrical lens hood.