Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition. Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
Jet a1, en590 diesel, crude oil .Connect buyers and sellers
Jet Fuel A1 is a specialized type of kerosene designed for use in aircraft powered by gas-turbine engines. It meets stringent international specifications, ensuring optimal performance and safety for aviation applications. Primary Characteristics: Appearance: Clear to straw-colored liquid. Odor: Characteristic petroleum or kerosene odor. Density: Typically around 0.80 kg/l at 15 C. Flash Point: Minimum of 38 C (100 F). Freezing Point: Maximum of -47 C (-53 F). Specifications: Jet Fuel A1 adheres to the stringent international standards set by organizations like ASTM (American Society for Testing and Materials) and DEF STAN (UK's Defence Standard).
En590, jeta1 and d6.
Wood pellet, seafood and scrap.
Origin: Kazakhstan. Available in CIF or FOB terms. Jet A-1 is a type of aviation fuel suitable for most jet engines, with a flash point of 38C and a freeze point maximum of -47C, widely used in commercial aviation.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
En590 10ppm diesel.
Ferrous: hms 1/2, used rails r50, r65. used drill pipes. nonferrous :copper cathodes, aluminium ingots a7, lead ingots, zinc ingots. minerals : iron ore, copper ore concentrate, lead ore concentrate, zinc ore concentrate, manganese ore, nickel ore. metallurgical coke, petroleum coke. steam coal. agriculture food: all grade rice, wheat, soya beans, sunflower oil, virgin olive oil. petroleum products : diesel fuel, gasoil, jet fuel ai, jet fuel 54. en500, d2, d6..
JET FUEL A1 The gold standard in aviation fuel, Jet A1 is renowned for its purity and reliability. Meeting stringent international standards, it powers aircraft worldwide with optimal performance and safety, making it the preferred choice for airlines and military operations. Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON.
Jet A1 - 12 Month CIF Contract Production Procedures: Product: A1 Jet Fuel Origin: Dubai Delivery: CIF to any safe world port MOQ: 1 Million Barrels per Month Refinery CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer\'s review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller\'s Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellers approval. 6. Buyer\'s Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller\'s bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer\'s bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer\'s Bank releases the Total Value of the Shipping to Seller\'s Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller.
Ultra low sulfur diesel (en590), aviation kerosene colonial (grade a1) jet fuel, aviation kerosene colonial (grade 54) jet fuel, liquified natural gas (lng), liquified petroleum gas (lpg).
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
Hallo we supplying EN 590 10 PPM and 50 PPM AND Jet fuel A 1 - Origin Kazhakstan Very genuine refinery - we have on going contracts - we work with 4 legit sellers Only serious buyers who can provide ICPO with BCL Supply capacity - 700-1000 K per month Long chain brokers please dont contact unless have direct contact with END buyer Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional )