The electric arc furnace (eaf) is a kind of steelmaking method which is produced by the electric arc between the electrode and the charge, which turns the electric energy into heat energy in arc light, and fuses the metal and slag with the direct action of the radiation and the electric arc.
Production Raw material: high quality petroleum coke & coal tar pitch. Vibration-molded, carbonized and graphitized under precise technical control. Usually machined to specific shapes for various purposes. Applications 1. Molds: hot pressing molds, static casting molds, centrifugal casting molds, pressure casting molds, etc. 2. Furnace parts: resistance heating elements, induction susceptors, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc. 3. Anodes for electrolysis of metals. 4. Cathodes in aluminum electrolysis cells. 5. Parts for heat exchangers. 6. Crucibles for melting and reduction. 7. Boats and trays for sintering. Programmable properties High thermal and chemical resistance Good thermal conductivity Low coefficient of thermal expansion Minimal wettability to molten metals
Production Graphite waste from graphitization and machining. Used as additives and conductive materials in the steelmaking and foundry industries. Applications Used as recycled graphite materials, as anode materials, as additives in the iron and steel industry, and can be used as coatings, coatings and electrical conductivity after crushing. Size 5-8mm (Other diameters are available on request.) Physicochemical index Fixed Carbon 99 Sulphur 0.03 Nitrogen 0.005 Ash content 0.5 Volatilazation 0.5
Indonesia origin Bare core MANUFACTURER ***** Albazia Falcata Bare Core / Barecore ***** For making Block Board or FURNITURE COMPONENT ***** Cutting 13.2mmx1250mmx2500mm ***** Premium export grade ^^^^^ Smooth and Flat Surfaces ***** MC under 13% **** Loading in 40hq = 54 cbm """""payment bank transfer 50% deposit and 50% balance against copy of B/L after shipment released
What are Tumi Ishi Wood Rocks? Tumi Ishi wood rocks are an open-ended wood toy that will provide hours of relaxing, and challenging fun. These handmade blocks are great for boosting focus, and attention, and for promoting creativity Tumi Ishi wood rocks are handmade and unique (no two blocks are the same). The blocks measure approximately 2 to 4 inches, and the weight of each block varies depending on the wood species
Graphite powder, graphite block, graphite tube.
calcined Petroleum coke 1.Mainly used in steelmaking in electrical stove, screening water, 2.Used to improve the Carbon content in steel-making and Ductile iron foundry 3. High carbon, low sulfur, with stable effect for improving the carbon content 4.Used in electric furnace steel smelting and cast-iron for improving the carbon content 5.In producing casting,increase the used quantity of Scrap steel and reduce the Scrap iron.Standard export packing, or required by customers 1,1ton Jumbo Bag, 18tons/20'Container 2,Bulk in Container, 20-21tons/20'Container 3.,As customers' request FC>98%Â ASH
1.Isostatic Graphite 2.Molded Graphite 3.Graphite machine parts Such like Graphite heater/ trays/ plate / mold/crucible and graphite parts according to clientsâ?? drawings and requests.
We manufacture graphite crucible for gold silver platinum jewelry industry, aluminum,copper,metal barss melting industry and vacuum evaporation film furnace. We also have our own graphite material factory together. Our quality is stable and price is low.
Graphite crucible is generally used in alloy tool steel smelting and smelting of nonferrous metals and their alloys. Graphite crucible can be used in the processing of graphite; graphite crucible; graphite casting crucible tank;pull rods; mold and other graphite products. Graphite crucible let the products are more durable than ordinary material products;longer service life; able to withstand more than 2000 high temperature
Graphite crucible is generally used in alloy tool steel smelting and smelting of nonferrous metals and their alloys. Graphite crucible can be used in the processing of graphite; graphite crucible; graphite casting crucible tank;pull rods; mold and other graphite products. Graphite crucible let the products are more durable than ordinary material products;longer service life; able to withstand more than 2000 high temperature
Indonesia Barecore MANUFACTURER ***** Albazia Falcata Bare Core / Barecore ***** For making Block Board ***** Cutting 13.2mmx1250mmx2500mm ***** Premium export grade ^^^^^ Smooth and Flat Surfaces ***** MC under 13% **** Loading in 40hq = 54 cbm """""payment bank transfer 50% deposit and 50% balance against copy of B/L after shipment released
Graphite mould is used in the fields of national defense, machinery, metallurgy, chemical industry, casting, non-ferrous alloys, and lightening, especially black carbon rods. It is also used in the fields of ceramics, semiconductors, medicine, environmental protection, laboratory analysis, etc. metallic material. When cutting steel, it is not necessary to use flammable and explosive gases like oxygen-acetylene flame cutting, which has low cost and safe operation. You can use arc cutting to process a variety of metals that cannot be processed by gas cutting, such as cast iron, stainless steel, copper, aluminum, etc., with high efficiency, and all can get more ideal results. Performance: The component is hard and brittle, has a small expansion coefficient, can withstand rapid cooling and heat, is not easy to deform, has good chemical stability, has strong acid resistance, does not react with strong acids, has poor alkali resistance, and can corrode at high temperatures. Disassemble rod
Graphite rod is used in the fields of national defense, machinery, metallurgy, chemical industry, casting, non-ferrous alloys, and lightening, especially black carbon rods. It is also used in the fields of ceramics, semiconductors, medicine, environmental protection, laboratory analysis, etc. metallic material. When cutting steel, it is not necessary to use flammable and explosive gases like oxygen-acetylene flame cutting, which has low cost and safe operation. You can use arc cutting to process a variety of metals that cannot be processed by gas cutting, such as cast iron, stainless steel, copper, aluminum, etc., with high efficiency, and all can get more ideal results. Performance: The component is hard and brittle, has a small expansion coefficient, can withstand rapid cooling and heat, is not easy to deform, has good chemical stability, has strong acid resistance, does not react with strong acids, has poor alkali resistance, and can corrode at high temperatures.
Wecustomized manufacture graphite boxï¼?graphtie tray,graphite boat graphite plate graphite sheet for tungsten carbide,powder metallurgy,Vanadium nitrogen,lithium ion battery powder and all kinds of alloy sintering and carbonization. We also have our own graphite material factory together. Our quality is stable and price is low.
Wecustomized manufacture graphite boxï¼?graphtie tray,graphite boat graphite plate graphite sheet for tungsten carbide,powder metallurgy,Vanadium nitrogen,lithium ion battery powder and all kinds of alloy sintering and carbonization. We also have our own graphite material factory together. Our quality is stable and price is low.
High quality graphite ingot mold you can select the size you need, and the size you can find on the listing photo for gold and silver melting after the formation of gold and silver pieces can also be used as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes
High purity graphite (fine-grained synthetic graphite), which is usually available in the shape of block or rod, is of the following physical and chemical properties: high strength, high density, high temperature resistance, oxidation resistance, erosion resistance, and so on. It is mainly used for electron discharge machining mold, sintering mold, continuous casting graphite jig, graphite crucible, crystallizer, making all kinds of graphite products, etc. The carbon content is up to 99.9%, and the particle size is about 325 mesh. The size of graphite block: 200~850 x 120~320 x 50~200mm; the size of graphite rod: ª¦110~630 x 250~600mm. Wooden cases with iron strip about 4 to 6 pieces , and with inner plastic preventing moisture and shock to be seaworthy shipping.
Product description: Copper coated graphite powder is a kind of new material produced by our factory, its specific gravity is higher than graphite and lower than copper, it overcomes the disadvantages of the mechanical mixing powder in the old technology, such as difficult to mix evenly and easy to form segregation due to big density difference ( copper 8.8ã103kg/m3, graphite 2.2ã103kg/m3) and bad dispersibility of graphite powder. At the same time, carbon and copper interface can only be connected by mechanical interlock, the bonding strength between the interfaces is low, which causes unstable product quality. For graphite and copper of high temperature infiltration, even when the temperature is up to 1100â the wetting angle is 140 it is very difficult for graphite to form evenly suspending distribution state in copper solution, and easy to have segregation. The copper coated graphite powder produced by our company is to make the graphite surface to be coated with one layer of continuous copper first, so the graphite distribute evenly between the copper. It is easy for copper to form three-dimensional grid structure, the interface bonding strength is high, which improves the product quality, it can be widely used as adding material in the production of motor brush, self-lubricating bearing, spray, liquid metallurgy material and so on. Copper content:25-95 Fineness:200-800 mesh
Product Introduction Graphite rods are mostly used in heating elements of high temperature vacuum furnace, it can still work at the temperature of 3000â??,and easy to oxidation at high temperature. they have low coefficient of thermal expansion, high heat conductivity, coefficient of resistance is 8~1310-6m, machinability is better than the sic�mosi2, and they are good resistance to high temperature, price is also cheap. According to requirements of customers, top graphite rods supplier-DJX Graphite Manufacturing Co., Ltd can customize the graphite rods and other graphite machining products. equipped with domestic advanced processing technology and equipment and experienced machining technical personnel to meet the needs of the graphite market today. Different specifications: 1.Superfine graphite rod; 2.Fine extruded graphite rod; 3.Medium extruded graphite rod; 4.Large graphite rod
