Introduction The tester is the basic instrument for testing the anti-bursting degree of paper and cardboard. It conforms to the standards of iso2758, iso2759 (standard testing for cardboard bursting strength) and gb1539 (method for testing cardboard bursting strength). It adopts signal transmitting press. When the specimen is burst, the tester stores the maximum of bursting strength automatically. Technical parameters Induction wayPressure converter Indicating wayDigital display Capability (optional)-high pressure0~100kg/cmª (0.01kg/cmª) Capability (optional)-low pressure0~16kg/cmª (0.01kg/cmª) Hydraulic oil85% HorsepowerShockproof motor 1/4hp Dimension43+53+52 (cm) Weight65kg Power Ac220v, 2.6a Plywood carton
The repair tester for Common Rail Injector CRI-1000 simulates the outputs of an Engine Control Unit (ECU) to provide user adjustable fuel injection control signals for driving the solenoid of a common rail injector. The CR injector being tested is fed by a high pressure fuel source, which may be a mechanical manual pump or an electrical motor driven pump or a pneumatic driven pressure booster. Such a test device will fulfill the tasks of checking nozzle spray pattern, injector back leakage and solenoid condition. Design Features Modulated driving signal to ensure the safety of the injector solenoid Adjustable frequency and pulse width for the injector driving signal Short circuit protection for solenoid driving signals Rich accessories, ready to test Bosch, Denso and Delphi injectors 40*37*20cm
LCD displays ATX power voltages Tests 20-pin and 24-pin power supplies Tests SATA power Tests Pentium 4 power connector Tests PCI-Express power connectors Tests Xeon power connectors Tests Floppy drive connectors Tests standard 4-pin power supply connectors Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs Aluminum Case Accurate Voltage indicator +/- 0.1V Displays ATX P.G. values Low or High PG aalues alarm ATX output connectors check Over voltage alarm No Voltage alarm Low Voltage alarm Blister
V-checker circuit tester
Universal fiber continuity tester Fast, easy to use, economical when compared with other testers Activate the high-intensity led light beam with a simple twist 24+ hours continuous use battery life with patented circuitry design Allow direct inspection from fiber end (singlemode or multimode) for continuity testing Elegant color anodize finishing for corrosion resistance, particularly important when using under hazard environment Rugged machined aircraft aluminium alloy construction Singlemode or multimode fiber testing Compact in size and easy handling Suitable for all 2.5mm connectors (fc, sc, st, fddi, escon), 1.25mm connectors (lc, mu) and sma connectors Red led light source, able to transmit light through 2km multimode fiber (subject to the fiber characteristics) Comes with handy blister package Blister packing
Hardness tester hln-11a Wide measuring range, for all metallic materials Direct display of hardness scales hrb, hrc, hv, hb, hs, hl Conversion to tensile strength (u.T.S.) Test at any angle, even upside down Removable printer included Six impact devices are available for special applications Large lcd display showing all functions and parameters Battery low indication New function of software calibration Power charging indication on the keyboard led Fault distinguish in details Weight:6kgs Dim:51*38*17
Features: 1, each durometer type is made to a specific scale (i. E.A, c, d) and is capable of producing a value between 0and 100. Shore a is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials. Shore d is designed for plastics, formica, epoxies and plexiglass. 2, it meets standards: din 53505, iso 868, iso 7619, astmd 2240, jisk7215. 3, used the exclusive micro-computer lsi-circuit and crystal time base to offer high accuracy measurement. 4, digital display gives exact reading with no guessing and errors. 5, can communicate with pc for reading, printing and analyzing by the optional software and cable for rs232c interface. 6, automatic power off to conserve power. 7, use operation stand of optional parts can get good accuracy and repetitiveness due to constant measurement force to eliminate the errors caused by artificially applied different force. Dimensions: 162x65x38mm
Glow wire tester Discussion of the Glow Wire Test (Varies as per relevant standard): 1. Object of the Test - Components or parts under Fault or Overload conditions, may attain a Temperature such that they will ignite parts in their vicinity. The GLOW - WIRE Test simulates thermal stresses which may be produced by such source of heat or ignition. e.g. glowing elements or overloaded resistors, may be for short duration, in order to assess by a simulation technique the Fire Hazard. 2. General Description of the Test - a. If possible, the specimen should be a complete equipment, sub-assembly or a component. b. While taking a part / parts of an enclosure for the Tests, care must be taken to ensure that the Test Conditions are not significantly different from those occurring in the Normal usage, with regard to shape, ventilation, effect of thermal stress and possible flames occurring, burning or glowing particles falling in the vicinity of the specimen. c. The Test is applied to ensure - 1. That the Glow - wire Loop which is electrically heated to a temperature specified, does not under defined conditions cause ignition of the Part/Parts. 2. That the part which might have been ignited, has a limited duration of burning, without spreading of fire by its flame or burning or glowing particles. d. This type of test may not be appropriate for too small components / parts / sub assemblies, which may need Needle Flame Test. 3. Test Apparatus - a. The Glow - Wire consists of a specified loop of a Nickel / Chromium ( 80/20 ) wire of 4 mm dia. b. Sheathed fine wire thermocouple, of overall dia. 0.5 mm ( wires of NiCr & NiAl ) with welded point / joint located in the 0.6 mm hole in the Loop of Glow - Wire. c. The Sheath consists of metal , resistant to a temperature of 960 deg. C in working. d. The instrument for measuring thermovoltage have 1 % accuracy. e. The Test Apparatus is so designed that the Glow - Wire Loop is horizontal and the mounted specimen moves horizontally towards the Loop with a force applied 0.8 to 1.2 N, for a penetration distance of 7 mm max. f. To evaluate the possibility of spread of fire, a layer of the material or components normally surrounded underneath the specimen is placed underneath the specimen at a distance equal to the distance between the specimen and the surrounding material or components when the specimen is mounted as in normal use. If a subassembly or a part of the equipment is tested separately, a piece of white pinewood board, approximately 10 mm thick and covered with a single layer of tissue paper, is positioned at a distance of 200+/- 5mm below the place where the glow-wire is applied to the specimen, unless otherwise specified in the relevant specification.
Electrical voltage tester Contact ac voltage range: 80v to 500v Long life of neon lamp, turn/off 50000 times or more, flash up to 20000 hours Shell made of transparent plastics, impact-resistant, insulation voltage up to 1000v The end with a hole for hanging up, hardness of blade head up to hrc52 40x26x22.5cm N/g 7.56kg/9.93kg
Code 93100: PE film on nose band for glasses wearer Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. Face mask with PE film on nose band for glasses wearer. 1. Type: Flat shape, 3-ply, non-sterile 2. Color: Green, blue, pink, white 3. Outer Layer: Water-repellent non-woven Middle Layer: High level static filtration non-woven Inner Layer: Microfilter thermal-bond non-woven 4. Nose band: PE iron wire 5. Anti-fog film: PE or non-woven material 6. Wear-type: Ear-loop and 4-ties
Guavas - The fruit is roughly spherical with a furrowed smooth surface. The most alluring element of a Guava is its fragrance, a bouquet of bright tropical aromatics. The flesh is unique to many fruits, its texture a combination of a firm banana with the succulence of an apple. Tiny edible seeds pattern the flesh's core. The flavor of Guava is a reflection of its aromatics, though more subtle with notes of pineapple, papaya, banana and lemon. PRODUCT INFO Guavas variety for export from Thailand is Kimju and Pan Si Thong. Wrap with foam net to protect its skin and might wrap again by plastic shrink film. It can also pack on tray for 500g or 1000g depends on the size of Guavas. USES Although Guava is a fruit, its culinary uses are nearly unlimited. Guava can be eaten whole for simple fresh eaten. They may be used for applications both sweet and savory, fresh, cooked, hot and cold. SEASONS Guava can be produced nearly all year round
Due to deep knowledge of the industry we are offering a wide range of Layer Chicken Concentrate 30 to our customers The offered products are prepared with topgrade inputs In adding to this a quality tester team tests these feeds on quality provisions for delivering the errorfree range Ingredients Corn Gluten Meal Wheat Gluten Soy Meal DDGS Pluses Essential Amino Acids Vitamins Minerals Trace Minerals Toxin Binders and Mold Inhibitor Product Details Crude Protein 35 Maximum Crude Fat 3 Maximum Phosphorous Total 16 Maximum Product Form Coarse Mash Form Pellet Form Product Branding HAF Net Weight 39 Kgs When Packed Product Type Chicks Meal Packaging Type P Bags Form Pallets Ingredient Profile 100 Vegetarian Calcium 3 Maximum Moisture 12 Maximum Application Poultry
DC voltage: 2/20/200/1, 000V AC voltage: 2/20/200/700 DC current: 200ma to 20A AC current: 200ma to 20A Resistance: 200/2/20/200k/20/20m/200mω Capacitance: 20nf/2/200uf Temperature: -40 to 400/400 to 1, 000 Dwell: 3/4/5/6/8cyl Tach: 3/4/5/6/8cyl Diode test: Yes Hfe test: Yes Continuity: Yes Duty holds: Yes Date holds: Yes Backlight: Yes Maximum display: 1999 General character: Meter color: Ron-grey+ red Meter weight: 445g Size: 205 x 100 x 60mm Standard accessories: Test lead, battery, manual Standard inner packing: Color box Standard packing quantity: 30 Outer packing size: 470 x 370 x 480mm Standard CTN gross weight: 25.5kg. 30 per carton Outer packing size: 470*370*480mm Gw:24.5kg.
Purpose SYF71 crack width and depth tester is used to test the crack depth and width. It is one professional crack measurement in one comprehensive test instrument, mainly used for crack detection of bridges, tunnels, walls, concrete pavement, metal surface. Specification The People's Republic of China Housing Security accreditation standards --- GJ125-99 Technical specification for inspection of concrete defects by ultrasonic method (CECS 21:2000) Performance/Functions 1. Large-screen display: 5 "color LCD display with a resolution of 640 * 480; 2. A high degree of intelligence: the boot that is measured, without human involvement parametric interpretation, display sewn deep value; real-time detection and automatic interpretation crack width, but also the manual interpretation crack width value, manually move the cursor to define the crack boundary is displayed on the screen scale ruler display crack width value; 3. Deep test: maximum test depth up to 650mm; maximum width up to 8mm 4. Dedicated scale: instrument equipped with a dedicated scale, portable and practical, to improve the efficiency of the test. 5. The instrument can be set and saved the test date: user-friendly data management 6. Easy data transfer: the instrument can be directly connected to the computer, copy pictures and data transmission without U disk; 7. Powerful professional windows data analysis processing software: data can be imported into Word and Excel, convenient and user-friendly post-processing of data. Technical Measurements 1. Crack depth testing range: =< 650 mm; test error: =< 10%; 2. Crack width value of measuring range: 0 ~ 8mm; width measurement accuracy: 0.01mm; 3. Crack depth test data storage capacity: 6000 set of test data; 100,000 and can store the image and width of cracks measured point data; 4. LCD screen resolution: 160X128 dot matrix 5. Built-in rechargeable lithium battery, can work continuously for eight hours; 6. Operating Temperature: -10 ? ~ +50 ?; 7. Host size: 190mm × 183mm × 84mm
Application Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries. Features 1: Our own patent technology 2: Embedded system control 3: Touch screen operation, easy to operate 4: TFT LCD display, UI flattening design 5: Dual heat jaws, temperature controlled independently 6: Micro-printer prints mini-report 7: Pressure easy to adjust, heat temperature and time touch screen input. 8: Emergency stop button, safety design to prevent burns 9: Over temperature protection, over pressure protection 10: Silence working 11: DB9 RS232 communication port. 12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data. Technical Indexes Heat temperature: Room temperature+6 ~ 300â?? Accuracy: ±0.2 â?? Dell time: 0.1~ 999.9s Pressure: 0.05 MPa~1.1MPa Heat jaw surface: 265mm Ã? 12 mm (customized) Heat jaws: 2, controlled independently Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide) Gas source interface: Ф6mm Outer dimension: 536 mm (L)Ã?335 mm (W)Ã?413 mm (H) Work noise: 0db Power supply: AC 220V 50Hz Net weight: 33kg Standards QB/T 2358(ZBY 28004)ã?�ASTM F2029ã?�YBB 00122003 Configuration Delivery: main unit, micro-printer, footswitch, sample feeding rod. Optional: Communication cable, DSM system -
Application Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries. Features 1: Our own patent technology 2: Embedded system control 3: Touch screen operation, easy to operate 4: TFT LCD display, UI flattening design 5: Dual heat jaws, temperature controlled independently 6: Micro-printer prints mini-report 7: Pressure easy to adjust, heat temperature and time touch screen input. 8: Emergency stop button, safety design to prevent burns 9: Over temperature protection, over pressure protection 10: Silence working 11: DB9 RS232 communication port. 12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data. Technical Indexes Heat temperature: Room temperature+6 ~ 300â?? Accuracy: ±0.2 â?? Dell time: 0.1~ 999.9s Pressure: 0.05 MPa~1.1MPa Heat jaw surface: 265mm ? 12 mm (customized) Heat jaws: 2, controlled independently Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide) Gas source interface: Ф6mm Outer dimension: 536 mm (L)?335 mm (W)?413 mm (H) Work noise: 0db Power supply: AC 220V 50Hz Net weight: 33kg Standards QB/T 2358(ZBY 28004)?�ASTM F2029?�YBB 00122003 Configuration Delivery: main unit, micro-printer, footswitch, sample feeding rod. Optional: Communication cable, DSM system -
Features 1, 320*480 3.5 inch LCD 2, Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2 3, Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance) 4, Support VLAN, Vectoring, Compliant with all known DSLAMs 5, Supports Modem emulation and simulating login to Interne 6, Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test) 7. Rechargeable Li-ion Battery 8. Support optical power meter, VFL function 9. Support cable tracing, check line sequence, landline telephone function 10. Support cable fault locator (TDR) function Specifications xDSL Index
Application GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials. Features Standard Gurley, Low Pressure Gurley, High Pressure Gurley Sheffield units, Bendtsen units Interchangeable test heads Output in seconds, other unit optional Embedded system, remote service Touch screen operation Test data and curve real time display Built in data query function Built in micro-printer to print reports Automatic overload protection. Highly accurate sensors to ensure the accuracy and repeatability. Swagelok piping system, to ensure system tightness and long-term stability Advanced control device, reliable operation and long service life Standard communication interface, configurable professional computer software The calibration can be traceable to ensure the measurability of the test data Support DSM system Technical indexes Test Range: 30,60,000 Gurley seconds,Standard, 0.0021,200um/Pa.s,Standard, 300,60,000Gurley seconds,Optional, 0,60,000 Gurley seconds,Optional, Resolution, 0.1 Gurley seconds Sample Amount, 1 ,Standard,,3 can be customized. Differential Pressure,0.01kPa,20kPa,STD,1.22kPa, Accuracy: 0.01kPa Test Area: 1.0in2. ,0.25in2, 0.1in2 optional, Sample Thickness: ,5mm Test Gas: Air, O2, N2, CO2,Self-provide, Gas Resource: 0.3MPa,1.0MPa Interface: Ф6mm Dimension: 320mm,L,�380mm,D,�410mm,H, Power Supply: AC 220V 50Hz Net Wt. 25 kg Standard ISO 5636.5,ASTM D726, TAPPI T460,TAPPI T536,TAPPI T538,TAPPI T490 Configuration Delivery,Mainframe, Test Head (1.0in2), Super Filter, Precision Pressure Regulator. Optional: Sample Auto Feeder, Calibration Equipment,Test Head(1.0in2), Test Head(0.25in2),Test Head(0.1 in2). Note: Specifications are subject to change without prior notice.
This testing machine is according to iec61058.1, iec60884 and iec60669.1 standards to design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test. Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use, and if there are adhesion phenomena or prolonged closed or disconnected phenomena occur, inspect whether there are excessive wear and other harmful consequences with it. It is the special equipment for switch mechanical life machine and electrical life endurance tester. Parameters 1.Power supply: ac220v10%/50hz or 110v/60hz 2.Station : stations, 1 and 2 station are used to perform switch test (rocker switches and push button switches can switch test, 3 and 4 station are used to perform the plug and socket testingm, all 4 workstation can work independently ) 3.Operation interface: 7-inch color lcd touch screen 4.Drive mode: pneumatic, 58kg/cm2 5.Control systems: plc control 6.Preset times: 0999999s, can be preset 7.Test times: displays the current number of trials 8.The on time: 099.9s, can be preset 9.The off time: 099.9s, can be preset 10:travel time: mechanical adjustment, take the cylinders maximum stroke position 11.Test rate: adjustable valve, about 0.2s / times 12.Atmospheric pressure : 80106kpa 13.Environment temperature:540 14.Relative humidity : ( 2090)%rh 15.Working place: no violent shaking, vibration, electromagnetic interference, no dust, Non-explosive and corrosive gases, good heat dissipation 16.Dimensions and weight : l*w*h=1180*750*750mm, 105kg
Six impact devices are available for special applications(d, dc, d+15, c, dl, g) Direct display of hardness scales hrb, hrc, hv, hb, hs, hl; Software to connect with pc and dataview for pc operation; Automatic identification impact devices and test direction (except g); Software data and upperlower limits setting and sound alarm; Time and date setting; auto-clock; On-board memory holds 240-1000 groups of data; Integral thermal printer, print all test results and histogram; For all metallic materials; Li battery , low voltage indication and sound alarm; Lcd with blue back-light, showing all functions and parameters; Wide measuring range; Long standby time and stable performance of field work;
