EU Classification Milk in powder, no sugar or other sweetening matters added. Fat content < 1.5%, protein on fat free dry matter > 34%, moisture
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
Corn Oil Refined best Quality Corn Oil Bulk Refined Corn Oil Product Corn oil Processing Refined Transparency without lees Smell and taste depersonalized oil odourless Color number,mg of iodine â?¥ 10 Acid value,mg kon/g 0.25 Mass fraction of not fat admixtures,% Absence Peroxide value O2 Mmol/kg : 2.0 Mass fraction of moisture and volatiles content,% 0.10 Mass fraction of phosphorus-containing substances in terms of stearooleoletsytyn,% Absence Corn oil, also known as corn germ oil, is the oil extracted from corn germ. The fat content of corn germ is between 17% and 45%,accounting for more than 80% of the total fat content of corn. The fatty acids in corn oil are characterized by up to 80% ~ 85% unsaturated fatty acids. Rich in multivitamin E. Protein, adipose, carbohydrate is the 3 big nutriment that human body health place needs, having close relation with facial beauty of skin. Protein is the main component of human tissue, and is an essential nutrient for the growth and development of human organs. Many active cells in human skin tissue cannot do without protein corn oil contains special nutrients, which can play a role in health care for patients with cardiovascular diseases. Crude corn oil is a vegetable oil that still needs to be refined, while refined oil is ready for consumption. Corn oil is also known as maize oil.
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
2023 New Food Grade High Quality Pharmaceutical Grade Coconut Shell Activated Carbon Pellet Product Specification Index Project YT101 YT102 Grain 10-24meshsize 2.0-0.8mm % â?¥ 98 â?¥96 Iodine value Mg/g â?¥1000 â?¥900 Methyl blue decolorizing ability Ml/g â?¥10 â?¥8 Hardness % â?¥98 â?¥96 Moisture % â?¤10 â?¤10 Ash % â?¤3 â?¤5 Bulk density g/m�³ 0.45-0.55 0.45-0.55 PH / 6-8 6-8 Supply Ability 20 Ton/Tons per Day Packaging Details 25kg/bag Can be customized according to requirements
Items Standard Appearance "White to slightly creamy white, hygroscopic powder or flakes" Identification A. An orange -yellow precipitate is formed B.A pale blue precipitate is formed C.A deep red colour is produced PH(1 in 20) 3.0~7.0 Water â?¤5.0% Residue on ignition â?¤0.1% Lead â?¤ 10ppm Aldehydes â?¤0.05% Hydrazine â?¤ 1ppm Vinylpyrrolidone â?¤0.2% 2-Pyrrolidone â?¤3.0% Peroxides(as H2O2) â?¤400ppm K-value 27.0~32.4 Assay(Nitrogen) 11.5~12.8% TAMC â?¤ 1000 cfu/g TYMC â?¤ 100 cfu/g Staphylococcus Aureus Negative in 10g Salmonella Negative in 10g Pseudomonas Aeruginosa Negative in 10g E.Coli Negative in 10g
Items Standard Appearance "White to slightly creamy white, hygroscopic powder or flakes" Identification A. An orange -yellow precipitate is formed B.A pale blue precipitate is formed C.A deep red colour is produced PH(1 in 20) 3.0~7.0 Water â?¤5.0% Residue on ignition â?¤0.1% Lead â?¤ 10ppm Aldehydes â?¤0.05% Hydrazine â?¤ 1ppm Vinylpyrrolidone â?¤0.2% 2-Pyrrolidone â?¤3.0% Peroxides(as H2O2) â?¤400ppm K-value 27.0~32.4 Assay(Nitrogen) 11.5~12.8% TAMC â?¤ 1000 cfu/g TYMC â?¤ 100 cfu/g Staphylococcus Aureus Negative in 10g Salmonella Negative in 10g Pseudomonas Aeruginosa Negative in 10g E.Coli Negative in 10g
Items Standard Appearance "White to slightly creamy white, hygroscopic powder or flakes" Identification A. An orange -yellow precipitate is formed B.A pale blue precipitate is formed C.A deep red colour is produced PH(1 in 20) 3.0~7.0 Water â?¤5.0% Residue on ignition â?¤0.1% Lead â?¤ 10ppm Aldehydes â?¤0.05% Hydrazine â?¤ 1ppm Vinylpyrrolidone â?¤0.2% 2-Pyrrolidone â?¤3.0% Peroxides(as H2O2) â?¤400ppm K-value 27.0~32.4 Assay(Nitrogen) 11.5~12.8% TAMC â?¤ 1000 cfu/g TYMC â?¤ 100 cfu/g Staphylococcus Aureus Negative in 10g Salmonella Negative in 10g Pseudomonas Aeruginosa Negative in 10g E.Coli Negative in 10g
Product Name: Soya Lecithin "Type: Food Additives Origin: China CAS No.: 8002-43-5 AUCO No.: 100 Packing: 200kg drum" Appearance Yellow to brown translucent,viscous liquid "Odor " little bean flavor "Taste " little bean flavor Insoluble in Acetone â?¥60% Peroxide value, mmol/KG â?¤5 Moisture â?¤1.0% Acid value, mg KOH /g â?¤28 Color, Gardner 5% 10-11 Viscosity 25â?? "8000-10000 cps " Ether insoluble â?¤0.3% "Toluene/Hexane Insoluble " â?¤0.3% Heavy metal as Fe Not detected Heavy metal as Pb Not detected "Total Plate Count " "100 cfu/g max " "Coliform Count " 10 MPN/g max E coli (CFU/g) Not detected Salmonlia Not detected "Staphylococcus Aureus " Not detected
Product Name: Vital Wheat Gluten Type: Food Additives Origin: China CAS No.: 8002-80-0 AUCO No.: 172 Packing: 25kg bag Items Standard Appearance Light Yellow Powder,Grain Frangrance Moisture �?�¢?�?�¤ 8% Protein (N*6.25 Dry Basis) 82.5% Protein (N*7.5 Dry Basis) 75% ASH(Dry Basis) 1.0 % Fat(Dry Basis) 1.0 % Hysroscopicity(Dry Basis) 170 % Granularity "CB30 99.5 % CB36 95 %" Arsenic 0.1 ppm Lead 0.2 ppm Aluminium 100 ppm Mold Amount 100 CFU/g Coliform 3 MPN/100g
COCOA BEANS SEEDS HS Code 18010000 PRICE = US$700/TON CIF ORIGIN: SOUTH AFRICA PACKAGE:,50KG MIN ORDER:200TONS DESCRIPTION The cocoa bean (technically cocoa seed) or simply cocoa (/�?ko�?. ko�?/), also called the cacao bean (technically cacao seed) or cacao (/k�?�?ka�?/), is� the dried and fully fermented seed of Theobroma cacao, from which cocoa solids (a mixture of nonfat substances) and cocoa butter (the fat) can be extracted. PHYSICAL CHARACTERISTICS CHEMICAL CHARACTERISTICS COLOR VISUAL: Brown ACIDITY (OLEIC ACID): â?? TASTE: Characteristic ASHES: â?? ODOR Fruity, nutty. FAT: Min. 49% (Cacao Butter) FOREIGN MATERIAL: Max. 1%* FERMENTATION: Min. 85% DEFECTS: Max. 3% HUMIDITY LEVEL: Max. 7% AVERAGE SIZE: 22 mm IODINE: â?? CALIBER: Min. 135/100 g MELTING POINT: â?? PARTICLE SIZE: â?? PEROXIDE: â?? * The product may contain traces of pits/stalks/shell. PH-LEVEL (10%): 5-6.5 SAPONIFICATION: â?? SOLUBILITY: â??
PRODUCT CHARACTERISTICS â?¢ Good solubility â?¢ Good flow properties â?¢ Full fat content â?¢ Rich creamy flavor 1. Instant Full Cream Whole Milk Powder Moisture : 2.5% max Lactose : 36.0% min Fat : 26.0% min Protein; 24.0% min Ash: 7.0% max Solubility Index: 1.0 max Titratable Acidity: 0.15 max Colour: Cream/White Flavour: Pleasant Standard Plate Count: 50000 cfu/g max Coliforms: 10 cfu/g max Staphylococcus: 10 cfu/g max Salmonella : Negative E. Coli : 10 cfu/g max S. Aureus: 10 cfu/g max Yeast & Moulds: 250 cfu/g max Sediment Disc: (/25g)Disc 2 max 2. Skimmed Milk Powder Protein: 34.0% min Lactose: 52.0% max Fat: 1.25% max Ash: 8.6% max Moisture: 4.0% max (non-instant) and 4.5% max (instant) Standard Plate Count: < 50, 000/g max Coliform: < 10/g max (instant) E.coli: Negative Salmonella: Negative Listeria: Negative Coagulase: Positive Staphylococci: Negative Scorched particle content: 15.0 mg max(spray-dried) Titratable acidity: 0.15% max Solubility index: < 1.0 ml (instant), < 1.25 Color: White to light cream color Flavor Clean, pleasing dairy flavor
Insulin Syringe Product Code: MED 178 Specifications: Sterile, individually packed in Medical Grade Blister & Ribbon Pack Size/Strength: 1ml 40U â?? Insulin, 1ml 100U â?? Insulin, Needle 29G-31G Description Non-Toxic, Non-Pyrogenic and Sterile Single use Latex free needle,Low Dead expose Needle is 20% thinner in diameter (31 G) for lesser penetration force in skin Available in 6mm length and 8mm length
Dehydrated Onion Flakes Cost-efficient Dried Onion Healthy Dried Vegetables Without The Addition Factory Direct Wholesale Specifications Product name Dehydrated Onion Flakes with FOB, CIF, CFR & other Price Term Physical analysis NO-GMO products, NO ANY foreigh matters, NO ANY additives, Moisture is MAX. 6%, SO2 is 50PPM MAX. Physical appearence Free from dead or life insects,droppings,sand,stone,defects etc Microorganism Total count of bacteria â?¤ 3.0*10^5cfu/g Coliform â?¤ 1.0*10 �³MPN/100g Salmonella Nil/25g Shelf life 12 months in normal temp; 24 months under 20 â?? Storage condition Sealed in dry, cold, waterproof & ventilated conditions Analysis tests Analysis test results on quality available if needed 15000 Metric Ton/Metric Tons per Year
Product Name: Diacetyl Tartaric Acid Esters of Mono and Diglycerides (DATEM) Type: Food Additives Origin: China CAS No.: 10085-39-0 AUCO No.: 298 Packing: 25kg carton" Items Standard Appearance White fine Powder Purity % 80%ï¼?20% free Flowing agent Acid Value 45-100 mg KOH/g Saponification 280-520 mg KOH/g Total Tartaric Acid % 10-40 Total Glycerol % 11-28 Free Glycerol % 2.0max Ignition Residue % 0.5max Arsenic (by As) 3ppm max Heavy Metals(Pb) 2ppm max
Cat Print Peach Color, Collar Night Suit With Contrast Pocket Peach color night suit comes with all over cat print with contrast pocket which give different and trendy look. Product fabric is soft and very much comfortable to wear. Variant: S SKU: MX_PH_PC22_CPS13-S In Stock: 19 Weight: 400 g Product Type: Night Suit Brand: MXstitchline Collection: Luxurious Fabric Night Suits
Product Name: Vital Wheat Gluten Type: Food Additives Origin: China CAS No.: 8002-80-0 AUCO No.: 172 Packing: 25kg bag Items Standard Appearance Light Yellow Powder,Grain Frangrance Moisture â?¤ 8% Protein (N*6.25 Dry Basis) 82.5% Protein (N*7.5 Dry Basis) 75% ASH(Dry Basis) 1.0 % Fat(Dry Basis) 1.0 % Hysroscopicity(Dry Basis) 170 % Granularity "CB30 99.5 % CB36 95 %" Arsenic 0.1 ppm Lead 0.2 ppm Aluminium 100 ppm Mold Amount 100 CFU/g Coliform 3 MPN/100g
Dried whole milk powder. Nido�® is a dry whole milk powder. Simply mix 32.5g (about 3 teaspoons) of milk powder and 225 ml off water to make 250mls of Nido�® Milk. Why not also try Nido�® milk powder in your tea and coffee? Nido�® was first launched during the 1940s as an extremely versatile and practical milk powder, ready to use at all times. The same is true to today as Nido�® milk powder can be used in many recipes and drinks, as a simple substitute for fresh milk. Packed in a protective atmosphere. Nutritional Compass�® �®Registered Trademark of Soci�©t�© des Produits Nestl�© S.A. Each tin contains 400g of Nestle Nido�® instant full cream milk powder Pack size: 400G Preparation and Usage 32.5 g Nido�®+ 225 ml water=250 ml 32.5 g milk powder and 225 ml water makes 250 ml reconstituted milk with 3.7% milk fat. 130 g milk powder and 900 ml water makes 1 Litre reconstituted milk with 3.7% milk fat.
Our Organic Moringa Powder is a premium, nutrient-rich superfood derived from the leaves of the Moringa oleifera tree, cultivated without synthetic pesticides or fertilizers. Harvested at peak freshness and gently dried to preserve its potent nutrients, this fine powder is a versatile addition to your daily diet. Health Benefits: Nutrient-Dense: Packed with essential vitamins and minerals, including Vitamin A, C, calcium, and iron. Antioxidant-Rich: Contains powerful antioxidants like quercetin and chlorogenic acid that combat oxidative stress. Anti-Inflammatory: May help reduce inflammation and support overall joint health. Energy Boosting: Provides a natural energy lift and can enhance overall vitality. Digestive Support: Promotes healthy digestion and supports a balanced gut microbiome. Add a spoonful to smoothies, teas, or recipes for a healthful boost. Enjoy the benefits of this remarkable plant in its purest form! Technical Specification of Organic Moringa Powder Product Name: Organic Moringa Powder Botanical Name: Moringa oleifera Appearance: Fine green powder Aroma: Characteristic, mild earthy scent Taste: Slightly bitter, vegetal flavor Particle Size: 100% passing through 60 mesh Purity: 100% pure, no additives or fillers Moisture Content: 8% Ash Content: 6% Protein Content: 25% Fiber Content: 20% Fat Content: 6% Carbohydrates: 40% Vitamins & Minerals: Rich in Vitamin A, C, E, Calcium, Potassium, and Iron Heavy Metals: Within permissible limits (As per WHO/FDA standards) Pesticide Residue: Free from pesticides (Compliant with organic standards) Microbial Load: Total Plate Count: â?¤ 10,000 cfu/g Yeast & Mold: â?¤ 100 cfu/g E. Coli: Absent Salmonella: Absent Packaging: Available in food-grade packaging (customizable upon request) Shelf Life: 2 years from the date of manufacture when stored in a cool, dry place away from direct sunlight Certifications: USDA Organic, India Organic Applications: Used in dietary supplements, functional foods, beverages, smoothies, and cosmetic formulations
1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.
