The clear photo frame is made of two thick acrylic block, and hold picture together by four corner's strong magnets. Easy to set up : Just one step is needed for assembly, and easy to update pictures. The picture is very easily placed between the two panels and is held securely with no additional hardware. Double Sided Frame: This photo frame can hold two pictures back-to-back and can be viewed from both sides. Material : Acrylic, Weight : 2 kg, Dimension : 12.7 x 12.7 x 2.5 Centimeters.
Use Bag Sealing Adhesive Side Double Sided Material Polyimide Polyimide Tapes is made from specially treated base coated Polyimide film having adhesive of silicon or Acrylic coating on another side. Features: It has the sound withstand voltage, High-temperature resistance and solvent resistance features. Uses: The product (Polyimide-Kapton tapes) has mainly been utilized in the gold finger protection during the components mounting on printed circuit board (PCB) through wave soldering, transformer insulation binding, lithium cell( battery) polar ear fixing, and other occasions where need heat-resistance.
Tape Length 30-40 m Feature Water Proof Material Tissue Double Sided Tissue Tapes is made from non woven-tissue paper coated on both sides with acrylic adhesive or hot melt rubber adhesive and laminated with release paper Features: Excellent tack and good strength for immediate bonding Good resistance to solvent Heat and chemical Usage: Foam and felt lamination in automobile and appliances manufacturing, Splicing of films/paper/ oils, lamination and fastening in paper/plastic and printing industries, adhere posters & envelopes, in shoe and leather industry, for computerized embroidery, for mounting nameplates, metal/polycarbonate stickers etc.
Usage/Application Mounting Type Double Sided Usage Packaging Adhesive Rubber Material Cloth Use Masking We made this Double Sided Tapes Paper, Plastic Film and Foam carrier which is coated with Acrylic/Rubber/Silicon adhesive coating depends upon the surface to be bonded, application period and temperature resistance required. Application: Foam and Felt lamination, Splicing of paper/film and metal coils. Mounting of metal/paper/plastic/glass/mirror in automobile industries, appliance manufacturing, aerospace industries, construction (metal facade, curtain wall, Glazing & cladding). Metal coils manufacturing, paper industries, Printing Industries, leather-cloth industries and signage industries.
Product Details: Packaging Type : Roll Material : Paper Color : White Design : Plain OR as per customer's requirement Usage/Application : Barcode Printing Design Type : Plain Pattern : Plain Brand : SuperStick Size :: As per customer's requirement Shape : As per customer's requirement Plain white chromo art paper labels for prinitng barcode. Composition: 1.) Surface Paper (label) : 80-85 GSM Chromo Art Paper 2.) Adhesive : 20 GSM Acrylic Adhesive 3.) Release Paper : 65 GSM Glassine Release
Price - 500/ Piece Minimum Order Quantity: 100 Piece Fabric : Cotton Gender : Boy Occasion : Casual Wear Size : 3/4 : 5/6 : 7/8 : 9/10 : 11/12 : 13/14 Wash Care : Premium Silicon washed Combed Cotton for top and Loopknit Neck Type : Crew Neck Acceptable Payment Mode : Online Shipment Mode : Air/Cargo Tshirt Gsm : 190 Available Photo print, Hd print, Glossy print, Rough line print, Etc.. Shorts Gsm : 240 With : All original accessories
Type Copy Paper Copy Paper Size A4 (210*297mm), Letter Size colour White Paper Size A4 usage Printing, Writing, Drawing, Fax, Photocopy Machines quality high quality Sample free samples Product Name A4 Letter Size Sheet 3 mil 5mil Clear Thermal Laminating Pouches Film for School Papers Application Document/Photo/Menu/Tag/Specimen/Certificate Brand YIDU SAILS Material PET/PE/EVA Size Custom Size Thickness From 55mic to 350mic Design Accept custom design MOQ Negotiable Packing White box or Color box Production Lead-time 1-100 boxes 7 days 100-1000 boxes 15 days One container 20-25 days Payment T/T,L/C,Trade Assurnce ,etc *Please note* The final price is subject to actual negotiation
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension: 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 110 - 135oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130- 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130- 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130- 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%