Description: Main features: Originally from Komatsu technology, high reliability and productivity Cummins China engine, powerful and reliable Torque converter and counter-shaft transmission gearbox are separated independently, higher reliability and easier maintenance Driving Axle in Meritor technology Fully hydraulic steering system, power shift transmission, easy to operate Comfortable operation environment, spacious cabin, Grammer seat, Various attachment are available, such as Log clamp, pipe clamp, rock bucket, loose bucket etc.
Description: Main features: --originally from komatsu technology, high reliability and productivity --chinese engine, powerful and reliable --torque converter and counter-shaft transmission gearbox are separated independently, higher reliability and easier maintenance --driving axle in meritor technology --fully hydraulic steering system, power shift transmission, easy to operate --comfortable operation environment, spacious cabin, grammer seat, --various attachment are available, such as log clamp, pipe clamp, rock bucket, loose bucket etc.
Description: 1. Chinese weichal engine is adopted, high horsepower, high efficiency and low consumption. 2. Single stage four units hydraulic converter, planet type force assist gearbox, automatically torque moment output. 3. The steering system adopts full hydraulic flowing magnifying mechanism, manipulating lightly and flexibly, small turning radius, steady performance. 4. Double-pump combined, high efficiency and energy conversation, high performance of motive ability. 5. Four wheels double tubes clamp-disk brake, gas storage container rear installed. 6. Front and gear chassis are box-type structure, perfect intensity. 7. Adopting modulization design, excellent optimization and combination of units, enforce the life of the transmission system, more reasonable matching of the machine. 8. Integrated control panel, streamline design, equipped with new type electronic instruments, monitor the operation condition of the machine promptly, humanization control layout, box type decoration. 9. Sound and heat insulation, wide view , to seal up good, protecting cover, do manual work exquisite. 10. Standard heating and ventilation equipment, air conditioner optional. All specialized operation devices should be selected out and configured with.
Wheel loader SX910 Bucket loading capacity: 0.5m3 Bucket rated load:1000kg Operation weight:2990kg Rated power: 33kw Original SD490G engine L*W*H (mm): 4960*1620*2420 Max. Dumping height (mm): 2420 Dumping distance (mm): 900. Container.
Detailed Product Description 0.4wheel loader 1) CE or EPA; 2) Engine: Xinchai, Changchai; Weichai 3) Rated loading: from 1T to 5T 4) Bucket capacity Wheel loader: 1. Using direct injection diesel engine as power, with easy startup and low oil consumption 2. Using special drive axle, with strong ability to overcome obstacle 3. Chassis uses hinged structure, with small turning radius and flexible turning, which applies to the operation in narrow space 4. This machine uses hydraulic operation, with simple structure, convenient operation, good performance and reliable quality 5. Widely applying to the construcction of agricultural engineering and small and medium building such as road, coal mine, brickyard, urban construction, kiln factory, stone material factory, prefabricated cement parts factory, etc. Specification of ZL08A Wheel Loader: 1.0 Engine Details: (1) Model: Changcai L22 (2) Engine type: In-line arrangement, water-cooled, one-cycle diesel Engine (3) Rated Power: 15.5KW (21.08 HP) (4) Rated Speed: 2200 r/min (rpm) 2.0 Steering System (1) Cycloid full hydraulic steering system: BZZ-80 (2) System Pressure: 10MPa 3.0 Bucket (1) Bucket Capacity: 0.4 m3 (2) Bucket width: 1300mm (3) Max. Breakout Force: 21KN (4) Rated Load: 800kg (5) Operating Weight: 2000kg 4.0 Overall Dimensions (1) Overall Length (Bucket on ground position): 4480mm (2) Overall Height (a) Ground to Cab Top: 2200mm (b) Ground to exhaust pipe: It is below from the top of cabin (3) Overall Width: 1400mm 5.0 Operating Specifications (1) Drive Means: Rear-wheel drive (2) Min Turning Radius: 3000mm (3) Driving System: mechanical (4) Dumping Height: 2300mm (5) Dumping Reach at max height: 900mm (6) Min the ground distance: 220mm (7) Time of raise: 4.5sec. (8) Hydraulic cycle time: 9second. 6.0 Brake System (1) Service Brake: Mechanical brake (2) Parking Brake: Hand operated. 7.0 Tyre (1) Model: 7.50-16 (2) Width: 18cm (3) Diameter: 78cm. 8.0 Wheelbase: 1620mm 9.0 Track: 1160mm. 1 sets in 1*20gp, 3sets in1*40hc.
Caterpillar Wheel Loader: 920, 928G, 936E, 936F, 938F, 950, 950B, 950E, 950F, 950FLL, 950G, 950GLL, 962G, 962H, 966C, 966D, 966E, 966F, 966FII, 966G, 966H, 972G, 970F, 973, 980C, 980F, 980G, 980H, 988B, 988F, 988G. Komatsu Wheel Loader: WA180, WA300, WA320, WA350, WA380, WA400, WA420, WA450, WA470-1, WA470-3. Kawasaki Wheel Loader: KLD65Z, KLD70, KLD70B, KLD80Z, KLD85Z. All of our machines are supplied with Great quality Best price High performance price ratio Immediatelly delivery Good working condition.
1. Rated load: 5ton, 2. Bucket capacity: 3 cubic meter, 3. Equiped with shangchai d9-220 engine, cat, cummines, shangchai, weichai engine available, 4. Equiped with xiaxin powershift planetary transmission, hangzhou zf wg180 transmission available, 5. Equiped with xiaxin strengthened axles, oscillate axles, soma axles and meritor axles available, 6. Air conditioner, pilot control (joystick) available, 7. Larger cabin, rops/fops, central lubrication system available, 8. High dump, side dump, paper clamp, log fork, breaking hammer, fork, oversize bucket, rock bucket, fast coupler. Item Unit Specification Bucket capacity M3 -¼3.0 Rated load T 5fa5% Operating weight T -n17 Length*width*height Mm 7920f+3030f+3300 Wheel base Mm 3200 Tread width Mm 2240 Dumping height Mm -¼3130 Dumping reach Mm -¼1320 Lifting time of the arm S -n5 Total cycling time S -n11 Traveling speed -f -f Forward gear i Km/h 0-11 Forward gear ii Km/h 0-35 Reverse gear Km/h 0-15 Max. Climbing gradient -p 30 Tires type -f 23.5-25 Engine model -f Shangchai d9-220 Rated power/rated speed Kw/r/min 162/2200 Axles -f Strengthed axles
1.Rated load: 6ton, 2.Bucket capacity: 3.5-4.5 cubic meter, 3.C6121 enine made in china by cat 3306b technoloy, 4.Hanzhou zf w 180 transmission, 5.Soma axles, 6.Air conditioner, pilot control (joystick), 7.Advanced tire, 8.Hydraulic system from the best brand of china. Item unit specification Bucket capacity m3 3.5-4.5 Rated load t 6 5% Operation weight 19.2 Length*width*height mm8385+3074+3400 Wheel base mm 3350 Tread width mm 2250 Dumpin height mm 2950 Dumpin reach mm 1255 Liftin time of the arms 6.1 Total cyclin times 10.7 Travelin speed Forward ear km/h0-8 Forward ear km/h0-15 Forward ear = km/h0-23 Forward ear km/h0-38 Reverse ear km/h0-8 Reverse ear km/h0-15 Reverse ear km/h0-23 Max .Climbin radientp30 Tires type23.5-25 Enine modelcat 3306b licensed shanchai c6121z Rated power/rated speedkw/r/min175/2200 Transmission hanzhou zf w180 Axlessoma axles
We have jgm 737 wheel loader available with following details : Rated load : 3000kg Rated power : 92kw/2200rpm Bucket capacity : 2.0m3 Operation weight: 10300kg Distance acc.To the height: 1000mm We also have many series of wheel loaders, please feel free to contact us, we will be happy to give you details.
We have fdm 716 wheel loader available with following details : Rated load : 1600kg Rated power : 44kw/2200rpm Bucket capacity : 1m3 Operation weight: 5600kg Distance acc.To the height: 890mm We also have many series of wheel loaders, please feel free to contact us, we will be happy to give you details.
Bucket capacity 3.0m3 Rated load 50KN Raising time 6.2s The sum of three times 11s Max. breakout force 165KN Max. climbing gradient 30íp Outside of rear tire 6250mm Outside of bucket 6890mm Operating weight 16300kg Min. ground clearance 540mm Max. dumping height 3200mm Dumping reach 1350mm Overall length 7500mm Overall width 2900mm Traveling speed (km/h) 1st 0-12 2nd 0-36 Reverse 0-16 Oil tank capacity Fuel tank 260L Hydraulic oil tank 280L Engine oil 20L Gear box 45L Axle and final reducer (single axle) 25L Brake system 4L Engine Type WD61567G3-28A Rated power /speed 162kw/2200r/min Brake system Brake pressure 0.45-0.68Mpa Foot brake type Air assisted oil disc type four wheel brake Hand brake type Soft shaft control inner expand hoof brake Transmission system Planetary type power shift transmission box Torque coefficient 4 Torque convertor intake oil pressure 0.3-0.45Mpa pressure 0.2-0.3Mpa Transmission control pressure 1.1-1.4Mpa Axle and main transmission Main transmission type Single stage Main transmission reducer radio 5.286 Final reducer Single stage planetary Working hydraulic system System type Open model twin-pump controlling Working system pressure 16Mpa Bucket delivery time 0.9s Tires Standard configuration size of tire 23.5-25 Front tire 0.333-0.353Mpa Pressure 0.275-0.294Mpa
The ZL50D-II loader adopts the STER construction machinery-specific diesel engine made by Weifang Diesel Engine Factory
Items technical specifications Rated weight (kg)2000 Operating weight(kg)6000 Rated capacity¿m1.0 Max breakout force (kn)55 Max drawing force (kn)45 Max.Dump height (mm)2750 Max.Dump reach (mm)920 Overall dimensions (lwh)(mm) 588020602700 Operating weight(kg)6000
Ln935 wheel loader Rated weight3500kg Operating weight 9700kg Overall dimensions (lwh)mm 6990 2420 3000
Technical specifications Rated capacity3.0m Transmission system gear box and torque-converter, the whole unit Rated weight5000kg Torque-converter mode Operating weight16500kg type double-turbine Automatic leveling ability yes Transmission box type full power shift, planetary power chang-shift type Static tilting load110kn Number of gear shift 2forward and 1 reverse 16500kg for operation load; Overall dimensions (lwh)mm 800430703300
DG966 High-efficiency Loader Weichai and Stair Diesel Engine are available, with environmental care, large power, high efficiency and energy saving, low noise and low emission. Adopt off-road large tyre 26.5-25 with no inner tyre, fast speed and reliable performance. Advanced Z-type reverse tipping bucket mechanism, optimized design of working device, reasonable articulated points distribution with large digging and lifting force. Main parts adopt domestic famous brand of quality products, and main structural components adopt high quality steel, which is more reliable and applicable. Pilot operation, lifting limitation, and bucket flattened automatically to reduce the driverí»s labor intensity. Double bumps concourse, coaxial flow amplifying steering and turning priority hydraulic system contribute to the simple flexible operation and reliable performance. Single stage, 3-element torque converter, power shift 4-forward and 4-backward transmission, and the separate structure of transmission and torque converter make the operation flexible and portable. The hydraulic parts adopt the imported 4-layer high-pressure rubber hoses, which bear high pressure and have reliable performance. Bow frame, smaller turning radius, flexible and applicable in many places. The air-hydraulic actuated disc brake and emergency brake system makes it more safe and reliable. All Pin devices are equipped with anti-dust installation, to avoid the entry of mud, sand and dust and prolong the lubricating time and service life. The cab meets the ergonomic design, with good visibility, airproof and decreasing vibration, which make the operation more comfortable and safe. The Integrated instrument panel is beautiful and comfortable. Optional devices are available, e.g. air conditioning.íí
DG938 high-efficiency loader òXichai and Deutz Engine are available, with low oil consumption, large torque moment, low noise but excellent performance. òPower shift transmission and full hydraulic steering contribute to flexible operation and more reliable operation. òThe optimized design of Z-type reverse tipping bucket mechanism contributes to large digging force and high working efficiency. òThe structural components adopt high quality steel, and the quality of the reinforced arm is more reliable. òBucket flattened automatically to reduce the driverÆs labor intensity òThe optimized design of drive and hydraulic system contribute to the fast travel speed and high working efficiency. òThe heavy body and long wheelbase make it more stable. òThe articulated point is placed in the middle, the bow frame, smaller turning radius, the front and rear wheels are in the same track, which benefit to protect the tyres. òAdopting excellent polyurethane high-pressure hose, the air-hydraulic actuated disc brake double pipelines brake system makes it more safe and reliable. òEquipped with anti-dust installation, the pin devices have long service life. òThe cab meets the ergonomic design, with good visibility, and the high grade of vibration decreasing seat is more comfortable and safe. òMultiple applications of the machine, various working devices are available, such as log grab machine, grass grab machine, and coal loading bucket, rock bucket, high dump and breaker.
Itemsparameters(lw350 wheel loader) Rated load3000kg Optional bucket1.5m3(rock bucketú 2.2m3ú¿light weight bucketú Dumping height3100mm Dumping reach980mm Max.Lifting height4012mm Working pressure of working system16mpa Arm lifting time6.5s Arm declining time4s Bucket forward tilting time 1.5s Breakout force96kn
Rated Loading weight: 1000kg Rated Bucket Capacity: 0.5m3 Operating weight: 2880KG Tread: 1320mm Wheel Base: 2040mm Min. Turning Radius: 4200mm Min. Ground Clearance: 240mm Dump Clearance: 2545mm Dump Reach: 900mm Lifting time of Bucket: 3.05s Max. Breakout Force: 32kn Overall Dimension: 4900X1685X2520(mm) Model of Engine: ZN485Q Type: turbulent, water-cooled, in-line, four strokes, four cylinders Bore & stroke (mm): 85x98 Rated power & speed (kw/r/min): 26/2200 Displacement (L): 2.156 Net weight (kg): 205 Overall dimensions (mm): 696x492x650 Operating weight: 2880KG Overall Dimension: 4900X1685X2520(mm)
Rated Loading weight: 1200kg Rated Bucket Capacity: 0.6m3 Operating weight: 3100KG Tread: 1400mm Wheel Base: 2005mm Min. Turning Radius: 4500mm Min. Ground Clearance: 260mm Dump Clearance: 2650mm Dump Reach: 1020mm Lifting time of Bucket: 4s Max. Breakout Force: 36kn Overall Dimension: 4800X1730X2720(mm) Engine Model: Changchai 4L68 Type: direct injection, water-cooled, in-line, four strokes, four cylinders Bore & stroke (mm): 95x100 Rated power & speed (kw/r/min): 37/2200 Displacement (L): 2.83 Net weight (kg): 250 Overall dimensions (mm): 696x492x650 Operating weight: 3100KG Overall Dimension: 4800X1730X2720(mm)