The chamomile water is steam distilled from fresh blossoms of bulgarian chamomilla during the months of may and june of each year. It is a completely natural product for skin and hair application. 100% pure and natural product. Chamomile floral water soothing and relaxing effect on the human body. Ideal as a facial or hair toner and for soothing irritated skin. Chamomile floral water is so mild it is ideal for use on babies. It can be added to bath water or used as a calming bedding / pillow spray.
The health benefits of Lavandin Essential Oil can be attributed to its properties as an antidepressant, antiseptic, analgesic, cicatrisant, expectorant, nervine, and vulnerary substance. The Lavandin, plant from which this essential oil is obtained, is not a natural plant in the true sense because it was born as a result of the hybridization of two plants with the scientific names Lavandula Angustifolia and Lavandula Latifolia. That is why Lavandin is scientifically known as Lavandula Hybrida and Lavandula Hortensis. The aroma and medicinal properties of Lavandin are quite similar to those of Lavender, but they are more intense and sharp since it is a hybrid. The main components of this oil are Lavandulol, Linalool, Linalyl Acetate, Camphor, Cineole, Caryophyllene, Camphene, Dipentene, Limonene, Ocimene, and Terpinene. Lavandin oil boosts self-esteem, confidence, hope, and mental strength, while efficiently fighting depression. This can be very helpful to drive away depression for those who are suffering from depression due to a failure in their career or personal relationships, insecurity, loneliness, stagnation, someoneâ??s death, or for any other reason. This also relieves anxiety. As an antidepressant, it can be systematically administered to patients with acute depression who are undergoing rehabilitation
Rose petals are edible and a traditional ingredient in the foods in the middle east, especially in desserts. In addition to sprinkling rose water on desserts, it is sprinkled on guests as a sign of welcome before the meal. Rose petal jam and cordial are still popular in Europe. Rose hips are a rich source of vitamin c and can be made into a conserve or jam. The petals are then eaten as a candy or used to decorate desserts. Roses are used for excess menstrual bleeding, digestive problems, gonorrhoea, and for liver symptoms. Delicious medicinal preparations can be made from rose petals, including syrup of roses, honey of roses, sugar of roses, rose water, and vinegar of roses. Rose petals have been used for conditions such as fevers, headache, jaundice, joint pain, fainting, weakness, trembling of the heart, poor digestion, and infection.
Origin: Vietnam Style: Antique Imitation Usage: Family Aquarium Decoration, Wedding Decoration & Gift Material: Organic Material Size: Variety Color: Natural Color Packing & delivery: Paper bag/ PP bag/ Carton box Payment: L/C, T/T,....
Specifications: Type: Cucumber, Gherkin Preserved type: vinegar, brine Acid: 0.35-0.55% (acetic acid) Salt: 2.4-2.6% (NaCl) Brix: 5.0-6.0% Price: Negotiation - Can size 720 ml: 12 cans/ carton + Loading: 1800 -1850 cartons/ cont 20 FT - Can size 1500 ml: 6 cans/ carton + Loading: 900 - 1000 cartons/cont 20 FT
Type: Coconut Peat Form: Granules Certification: Organic Place of Origin: Vietnam
Type: Coconut Peat Form: Granules Certification: Organic Place of Origin: Vietnam
- Materials: Natural wooden - Color: Printed any colors - Size: 5 mm to 30 mm, as your request - Shape: Round - Square - Oval - Style: With hole for decoration - Shipping: Support Express - Sea freight - Air freight
Rattan mats are made 100% from skilled, experienced workers.
Specification: Origin: Village in Viet Nam Material: 100% natural Rattan Color: Brown, White, Pink, Black.... Size: Various Size Technical: Plain Dyed, Wicker Price: depending on each size and quantity Function: Decorative and Holiday like Christmas Feature: Eco-friendly, durable, lightweight Style: Luxurious, elegant, modern MOQ: 1000 Pieces Payment: L/C, T/T, Western Union, Xoom
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
