Alumina Oxide Cas1344 28 1 Suppliers and Manufacturers

800 Watts Powerful and durable motor 3 Speed Setting with Incher Anti-slip Vacuum Feet Reverse Quadra Flow Jars Silent & Smooth Compact Design with Elegant Look Hygienic Stainless Steel Blender Jar (1.5 Ltr Capacity) Hygienic Stainless Steel Wet Grinding Jar (1 Ltr Capacity) Hygienic Stainless Steel Dry Grinding Jar (0.5 Ltr Capacity) Hygienic Stainless Steel Blades with hard chrome plating 28 000 RPM Overload Prevention Mechanism 1 years motor warranty Dome lock Lids for extra safety.

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects

Oxides % Mg O

Product Name: Iron Oxide Yellow 313 Color Index: Pigment Yellow 42 C.I. No.: 77492 CAS No.: 51274-00-1 EINECS NO.:275-098-5 Molecular Formula: Fe2O3.H2O Molecular Weight: 177.71 Iron Oxide Yellow 313 Properties Iron Oxide yellow 313 main content is the ferric oxide, iron oxide yellow chemical formula Fe2O3.H2O, is one of the iron oxide hydrates. Redone Iron Oxide Yellow 313 is a common iron oxide pigment used in developing building materials, paints, rubber, asphalt, sports racetracks, paper, plastic and others.

Type : All Types (usda standard) Staple Length : 28 to 29 mm. OR (1-9/32? inches) Mic. : 3.5 to 4.9 NCL Strength : 88,000 PSI minimum Moisture : 7.5 % Maximum Trash : 3.5% Maximum

Type : All Types (usda standard) Staple Length : 28 to 29 mm. OR (1-9/32? inches) Mic. : 3.5 to 4.9 NCL Strength : 88,000 PSI minimum Moisture : 7.5 % Maximum Trash : 3.5% Maximum

1. Round ( Fandoghi) 2. Jumbo ( Kaleh Ghuchi) 3. Long ( Badami, Ahmad Aghaei, Akbari) The available size as follow: 20-22.22-24, 26-28, 28-30, 30-32, 32-34 The normally packing is 10kg/25kg/50kg/plastic bag, or by your requirement Natural: %100 Open Shell Pistachio: Min %95 Closed Shell Pistachios: Max %5 Crop time: Mid September Salmonela: N/A E.Coli: N/A Yeast: N/A

1. Round ( Fandoghi) 2. Jumbo ( Kaleh Ghuchi) 3. Long ( Badami, Ahmad Aghaei, Akbari) The available size as follow: 20-22.22-24, 26-28, 28-30, 30-32, 32-34 The normally packing is 10kg/25kg/50kg/plastic bag, or by your requirement Natural: %100 Open Shell Pistachio: Min %95 Closed Shell Pistachios: Max %5 Crop time: Mid September Salmonela: N/A E.Coli: N/A Yeast: N/A

Color: typical, without oxidation Aroma: typical of strawberry Taste: typical of strawberry Consistency: Firm Foreign materials: Animal (insects, worms, larvae): - not permitted Vegetable: calyx or fragment - up to 3mm max./1 kg fruit Stalks or fragment - up to 3mm max./1 kg fruit Leave and stalk

Color: typical, without oxidation Aroma: typical of strawberry Taste: typical of strawberry Consistency: Firm Foreign materials: Animal (insects, worms, larvae): - not permitted Vegetable: calyx or fragment - up to 3mm max./1 kg fruit Stalks or fragment - up to 3mm max./1 kg fruit Leave and stalk

Applications 1. Mainly used in electroplating industry. 2. Used as a catalyst for preparing polyethylene by phillips process under medium pressure. 3. Used for the preparation of analytical reagent, strong oxidant and chromate. 4. Used as catalyst for synthesis of polyethylene. 5. Used in electroplating industry, medicine industry, printing industry, tanning leather and fabric mordant dyeing.

Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.

Zinc oxide is white powder, with good hiding power and tinting power, widely used in printing & dyeing, rubber, coating, ceramics, feeds, cosmetics, pharmacy,ink, cable, electronics, phosphor, catalysts. 1. The product has small particle size, large specific surface area, strong adhesion and hiding power, which can greatly improve the efficacy of the coating. 2. The product has a small proportion and is not easy to form precipitation in the use or final product. 3. The product also has the function of shielding ultraviolet rays, and can play an anti-aging role in the coating.

Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20

Ball clay, or plastic clay as it is also known, is an extremely rare mineral, only found at a handful of locations around the world. It is a kaolinitic clay that commonly consists of 20 - 80% kaolinite, 10 - 25% mica, 6 - 65% quartz as well as organic matter. Ball clay is formed from the weathering and transportation by water of parent rocks which are deposited in ancient river basins from where it is extracted. Applications: - Ball clays are prized for the production of traditional ceramics such as sanitaryware, tableware, wall and floor tiles as well as for technical ceramics and electrical porcelains. Ball Clay products are immensely used in the manufacturing of Ceramics, Sanitaryware, Vitrified Tiles, Glazes and Engobes ultramarine and in various other purposes. As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 96+ AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 50 - 65 % 2. Alumina - (AI2O3) 20 - 35 % 3. Iron - (Fe2O3) 0.33 - 2 % 4. Titanium - (TiO2) 0.31 - 3 % 5. Potash - (K2O) 0.19 - 2 % 6. L Value 60 - 88 %

Dolomite mineral is a double carbonate of calcium and magnesium and it exhibits a granular structure. It has high natural whiteness and it's noted for their ease of dispersion. Its use improves properties such as weather ability, reduces shrinkage, fissure development and water absorption. Natural Dolomite Powder is of White Colour and is used as Filler in many applications such as Soap & Detergent, Paints, Ceramics and many other Industries. Applications: - Soap & Detergent Leather Cloth Industry Cable Industries Rigid PVC Pipes Iron, Steel, and Ferro-Alloys Industries Paints, Inks, Powder Coating Ceramic Industry Rubber Industry Glass Industry Available Mesh Size: - 100 TO 700 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 92 TO 96 AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 10.41 % 2. Alumina - (AI2O3) 01.15 % 3. Iron - (Fe2O3) 00.21 % 4. Titanium - (TiO2) 00.18 % 5. Calcium - (Cao) 30.02 % 6. Magnesium - (MgO) 18.41 % 7. Soda - (Na2O) 00.34 % 8. Potash - (K2O) 00.07 % 9. Loss on Ignition - (LOI) 38.91 %

Quartz a crystal form of silica is found in a massive forming hill. Quartz is a mineral that's easily available from the crust of earth. And yet, it's quite valuable for its vast usage. Applications: - GLASS CERAMIC ABRASIVE PAINT SODIUM SILICATE FERRO SILICON REFRACTORY Millimeters Scale ASTM Scale 0.08-0.15mm 100-200 Mesh 0.1-0.2mm 70-120 Mesh 0.2-0.4mm 40-70 Mesh 0.3-0.6mm 26-40 Mesh 0.6-0.12mm 16-26 Mesh 1.2-2.5mm 8-16 Mesh 2.5-4.0mm 6-8 Mesh 4.0-6.0mm 4-6 Mesh 6.0-8.0mm 3-5 Mesh 38 Microns 400 & 200 Mesh Index Compound Unit Result 1. Silica - (SiO2) % 98.11 2. Alumina - (AI2O3) % 00.49 3. Iron - (Fe2O3) % 00.03 4. Titanium - (TiO2) % 00.03 5. Calcium - (Cao) % 00.64 6. Magnesium - (MgO) % 00.07 7. Soda - (Na2O) % 00.09 8. Potash - (K2O) % 00.03 9. Loss on Ignition - (LOI) % 00.20