Width - 21.00 mm Hole dia - 10.03 mm Hole pitch - 25.40 mm Lenth - 3 feet
Bending lenth - 24.00 mm Width - 14.00 mm Deep draw - 7.00 mm lenth Thread - m6 x 1.00 go not go checked.
Size 490mmx490mm thk 2mm Weight 3.2kg With white powdercoating Min qty 5000nos. 10nosin 1carton Weghit 32kg
Plastic Grills, Molded (Cast) Grills, CTP Molded square cross-section grills, FRP Molded Grills Composite grills, molded, CTP orthophthalic grills,CTP isophthalic grills,CTP vinyl ester grills ,grills suitable for every sector. CTP Molded Cast Grills, produced by using variety of resins for different chemical conditions. Compared to metal grills, these grills are much lighter and can be easily processed. Due to high resin level, these grills provide an optimum chemical endurance and minimum maintenance. Cast grills; due to their fiber layers, provide flexibility on the use of panels both transverse and longitudinally, while providing high transport resistance. CTP Molded grills; square and rectangle pored are produced in single piece. CTP grills provide perfect traction on greasy, wet and icy surfaces which is ideal for chemical, industrial and maritime industries. CTP (Composite) Heavy Load Grills Grills those are suitable for uses at heavy load construction zones and heavy load machinery zones. For areas where steel grills are insufficient for load and width. Plastic Grill Closed Heavy Load Grill Diamond shaped designed plate, square profile heavy load grill; provide a safe working environment while providing a pleasant look. Resistance of these grills have been tested and proved for use areas such as busy traffic areas, construction zones that contain forklift and heavy construction machineries PULTRUDED GRILLS CTP profiles that have been produced by pultrusion technique – are constructed by the combination of CTP bars. Due to high fiber they contain, these grills have high resistance Pultruded grills are lighter and practical than metal. PULTRUDED PHENOLIC GRILLS Pultruded grills that contain phenolic resin are commonly used in areas where fire safety is important. Incomparable impact resistance, glass reinforcement and UV resistance responds to maximum levels of need. Pultruded phenolic fiberglass grills, meet all levels of requirements in USCG PFM 2-98 Level 2. Tested in independent laboratories. Fire tests done by the ASTM-E-84 Fire Test Standards, show the fire distribution level at 5 and smoke index at 5. Phenolic resin grills are certified accordingly to USCB rules, and Level 2 qualification of ships, tankers and oil refineries. Fire Proof Phenolic resin Grills Certifications: Rain Water Grill 570x570mm Medium grill interval, diagonal to the road 34,5 Kg 180° openable cover 485x485mm Medium grill interval, diagonal to the road 22,5 Kg 180° openable cover 640x345mm Medium grill interval, diagonal to the road 22,5 Kg 180° openable cover
We bend the tubes and produce tube assemblies. Export packing.
All kind of air conditions spare parts.
Model Number: SAS816FHL-0 Type: Floor heating / Electrical heating Certification: CE logo: OEM or SASWELL color: white Packaging Detail: 100pcs per carton. carton:51cm*30cm*31cm . Delivery Detail: for 500pcs, leading time in 25days after got receipt from bank Introduction The SAS816FHL-0¡Ks non-programmable room thermostat, apply to floor heating system, electrical heating system. Application This room thermostat is apply to Residential buildings, Light industrial buildings. Features Mini LCD display save energy,easy read room temperature Big adjust knob is easy for old people and children operation Optional economic operation or comfort operation Optional detective sensor: Build in sensor or external floor sensor. Optional temperature display of Celsius or Fahrenheit scale Compressor delay option for cooling selection Day/Night switch save energy. Technical data Voltage: 100~240VAC 50/60HZ Relay contact: 250VAC, 5A (3A) Room temperature setting range: 5¢J~30¢J (41¢K~86¢K) Floor temperature setting range: 5¢J~ 40¢J Accuracy: ¡Ó1¢J or ¡Ó1¢K??? Ambient temperature: 0~50¢Xc Protective housing: IP21 Housing material: PC+ABS Dimensions: 86mm¡Ñ86mm¡Ñ25mm wall mount. 100pcs per carton. carton:51cm*30cm*31cm .
Model Number: SAS808FHL Type: Floor heating/ Electric heatingCertification: CE Logo: OEM or SASWELL color: white Introduction The SAS808FHL...room thermostat is designed for hot water radiant heating systems and electric heating cable system.. It is helping to limit floor temperature for protecting wooden floor. Application The room thermostat is used in Residential buildings. Features The room thermostat with built-in NTC sensor, also have external floor sensor, three control mode available Shut down output when heating over limitation for protecting the wooden floor 7-days Programmable or non-programmable available Permanent hold mold and temporary hold duration mode available for comfort and energy saving Keep user setting during power loss Technical data Voltage: AC100- 240V 50/60Hz Power load: 16A / 3500W Setting range: 5¢Xc~40¢Xc Limitation range: 5~35¢Xc (factory setting 35¢Xc) Switching differential: ¡Ó0.5¢Xc Ambient temperature: -5~50¢Xc Protective housing: IP21 Housing material: PC+ABS Floor sensor: Thermoplastic Rubber NTC sensor, cable length is 2.5 m ƒÜDimension: 80mm X 80mm X16mm flush mount 50pcs per carton. Carton:47cm*33cm*37cm .
Model Number: SAS816WHB-0 / SAS816WHL-0 Type: Water based radiant heating / boiler heating Certification: CE logo: OEM or SASWELL color: white Introduction The SAS816WHB/SAS816WHL¡Kroom thermostat is apply to water based radiant heating,boiler heating /coolingsystem. Application This room thermostat is used in apply to Residential buildings. Features Battery back up ,and low Battery Indicator. Room temperature easy read out by Mini LCD display ,without backlight save energy; Big adjust knob is easy for older and children controlling; easy read setting temperature Optional economic operation or comfort operation Optional temperature display of Celsius or Fahrenheit scale Compressor delay option for cooling selection Day/Night switch save energy. Active output for valve actuator and passive output for boiler Technical data Voltage: 2AA alkaline batteries Room temperature setting range: 5¢J~30¢J (41¢K~86¢K) Accuracy: ¡Ó1¢J or ¡Ó1¢K?? Ambient temperature: 0~50¢Xc Protective housing: IP21 Housing material: PC+ABS Dimensions: 86mm¡Ñ86mm¡Ñ25mm wall mount 100pcs per carton. carton:51cm*30cm*31cm . Packaging Detail: 100pcs per carton. carton:51cm*30cm*31cm . Delivery Detail: for 500pcs, leading time in 25days after got receipt from bank
Model Number: SAS908FCT¡K Type: Fan Coil / Air Conditioning /Cooling Certification: CE Logo: OEM or SASWELL color: white Introduction The SAS908FCT...fan coil room thermostat is used in air conditioning system. Application This fan coil room thermostat is apply to Commercial buildings, Residential buildings, Light industrial buildings, hospital Features 2-pipe or 4-pipe heating/cooling available Remote controller available Room card function / Window card function available/ External sensor avaialble Display shows both set points and room temperature simultaneously Auto fan with adjustable 3-fan speed. Keep user setting during power loss Anti-freezing protection Technical data Voltage: AC100- 240V 50/60Hz Load: 3A / 8A Setting range: 5¢Xc~35¢Xc Accuracy: ¡Ó0.5¢Xc Ambient temperature: 0~50¢Xc Protective housing: IP21 Housing material: PC+ABS Dimensions: 115mm¡Ñ90mm¡Ñ16mm Flush mount or wall mount 50pcs per carton. carton:51cm*30cm*31cm . Packaging Detail: 50pcs per carton. carton:51cm*30cm*31cm . Delivery Detail: for 500pcs, leading time in 25days after got receipt from bank.
Product Identification, Model and Performance Spcifications Radial produced fan types have different models and shapes which in operation conditions and capasities between 100m3/h 150000 m3/h. Models Have rare bladed, back inclined radial fans (TRHD) Have dense bladed radial fans (TRV and TADH) Also each type of fan can be produced tandem and used multifan, so same kind of two or moreover fans should operate with one motor. When for this kind of fans are used fan selection table, consider that theused fan number is "n", then the pressure value of single fan will be constant so the value which will be read on the curve is the absorbed power is multiply by (n x 1,10) and revolution is multiply by 1,06. Which is the dense bladed type radial TADH fans' rotor blade widht and numbers are more than type of TRV which is dense bladed fans, so that provides more air flowing from the same size fan. The rotor type of rare bladed, back inclined fans (TRHD), completely different than the dense bladed radial fans. Rather sloping of large faced rotor blades on the contery of the dense bladed fans are faced to the back inclined. Place of Origin: Izmir Turkey Brand Name: TKB Makina Model Number: TADH Type: Radial Fan Electric Current Type: Both AC&DC Mounting: Free Standing Blade Material: Stainless Steel , Galvanized St... Air Volume: 3.600 / 140.000 m3/h Speed: 650 / 4.200 dd Certification: CE Power: 3.00 / 75.00 KW Color: Metalic
TDC (Transverse Duct Connector) system is a separate flange install onto the for rectangular ductwork. The flanges attach to the duct wall and have an integral mastic which allows the flange to seal itself to the duct. Octopus Metal offers wide range of TDC flanges at very competitive price through a complete supply chain. Material: Galvanized Steel, Stainless Steel 2) Available in zinc coating: 80g/m² - 275 g/m² (G25 - G90) 3) Specifications: Item No. Size Thickness OCT-F20-A 20mm 0.8mm OCT-F30-A 30mm 1.0mm OCT-F40-A 40mm 1.2mm Assorted duct corners are available. Standard export packing.
The Duct Corners are used to add rigidity to the flange; hold the ductwork, together and provide a sealing surface for the gasket. Octopus Metal offers various Air duct corner, customized production is available based on supplied drawing or sample. TDC Corner : For Transverse Duct Connector system, the flange is separately installed onto the ductwork. 1) Material: Galvanized Steel, Stainless Steel 2) Size: 20 mm / 25mm / 30 mm / 35mm / 40 mm 3) Thickness: 2.0mm / 2.5mm / 3.0mm / 3.5mm /4.0mm TDF Corner : For Transverse Duct Flange system, the flange is formed from the same sheet as of the duct. 1) Material: Pre - galvanized 2) Size: 105*30mm 3) Thickness: 1.0 mm -1.2 mm (18-20 Gauge) Standard export packing.
Copper tube insulated for air conditioning systems. Size from 1/4" - 3/8" - 1/2" - 5/8" - 3/4". Rolls in pallets.
Sunsong is the first power steering hose manufacturing in china.Supplying most chinese oem with 50 + applications.Export to european aftermarket with 83 + part numbers, applications include mercedes, bmw, audi and volvo Features:all hose is conformed to SAE J188/ SAE J189HOt impulse: 400, 000 times high volumetric expansion: 6ml/ft excellent low noise.
Ultra-low permeability: 0.6 m²/year Super adhesion Resistance to High and low temperature Advanced structure, easy to assemble Distinguishing characteristics of shock absorption and noise reduction High flexibility, easy to bend and install Excellent Cleanliness, high flexibility, easy to bend Resistance to high pressure, long life, safe and reliable Designed and manufactured to protect and improve atmospheric environment.
High temperature resistance (150¡æ) Low permeability (Meet O3 spec.).
Whip Test upto 200 hours; Low expansion ¡§C 0.27ml/m Low moisture permeability; Excellent impulse 1st Manufacturer in China to obtain DOT. Meet & exceed SAE J1401 & DOT FMVSS 106 and OEM specification, i.e. GM, Ford, Chrysler, etc. Supply most OEM in China and some OEM internationally.
allthe fittings and brake hardware can be made with mild steel, stainless steel and brass material. Thread including metric thread M10x1, M10x1.25, M12x1.25, M12x1.5, M14x1.5 etc; and imperial thread 3/8x24, 7/16x20, 7/16x24, 5/8x18, 5/8x26 etc.
Capacity : 55 gallons. Tank : 12 swg imported sheet. Outer body : 23 swg imported sheet with powder coating. 100% imported malaysian wood glass Tesla thirmostate . Top and bottom 10 swg One year warranty Packing in good material
