9-function electric bed Size: 2000-2200 * 1000 * (640-860) 9-function: Height adjustment: 640-860 Back Section adjustable: 0-75 Knee section adjustable: 0- 45 Trendelenburg: 0- 15 Anti-Trendelenburg: 0- 15 Left and Right: 0-12 Footboard extend function: 2000-2200 Chair function CPR function Technical Parameter Technical Parameter 1. treated by electro-coating and powder-coating 2. cold-rolled steel bedboards 3. PP material handrails 4. X-ray available back board 5. 6pcs Linak motors 6. Embedded operator 7.CPR function 8. Battery backup 9. 4 double-side silent wheels(150mm) 10. All the screws made of stainless steel material 11. Height adjustable 304 stainless steel iv pole 12.One-step molding powder coated steel dust cover 13.Angle indicator panel 14. Centrol control side brake 15. With anti-bumper, lighting lamp 16. Fifth caster
Size: 2000-2200*1020*525-965mm 8-Functions: HI-LOW:525-965mm Back Section adjustable:0-75 Knee section adjustable:0- 45 Trendelenburg:0- 15 Anti-Trendelenburg:0- 15 Length extend: 2000-2200 Chair function Footboard curve function CPR function Technical Parameter 1. treated by electro-coating and powder-coating 2. cold-rolled steel bedboards 3. PP material handrails 4. X-ray available back board 5. 6pcs Linak motors 6. Embedded operator 7.CPR function 8. Battery backup 9. 4 double-side silent wheels(150mm) 10. All the screws made of stainless steel material 11. Height adjustable 304 stainless steel iv pole 12.One-step molding powder coated steel dust cover 13.Angle indicator panel 14. Centrol control side brake 15. With anti-bumper, lighting lamp 16.Drainage hook 17.Loading capacity: 300kg
Features DIMENSION L2160xW1060xH450 720mm 1,Carbon steel bed frame,bed platform steel sheet design,High-temperature electrostatic of spraying. 2,ABS head and foot board are detacheble.Siderails made of PP materialã?? 3,Central brake system of 5 inch castors. 4,Bumpers are on the corners and we use the JIECANG motors and I.V. pole Functions: 1. Backrest lifting 0to 80(�±°) 2. Footrest lifting 0to 40 3. Height adjustment 450-720mm 4. Trendelenburg from 0to 12 5. Reverse Trendelenburg form 0to -1
Function: Backrest:0~75±5 Footrest:0~40±5 Height:430~810mm(from ground to bed board) Reverse:0~14±1 Trendelenburg:0~14±1 Material Steel Electrostatic spraying+ABS +Aluminum+rubber Mild steel electrostatic spraying frame ABS head and foot board Aluminum side rails foldable and removable 5 Rubber castor with central brake system Accessories 4pcs 5 castors with central brake system 1 set of bed side rail 1 set of detachable ABS Head & Foot boards 4 Urine hooks 1pc MOTECK motor(1pc hand set,1pc control box,4pcs electric motors) 4pcs angle displayers 2pcs central brake pedals 4pcs bumper wheels on corner Specification: Sizeï¼?2140*1000*440-770mm Length:2140mm Width:1000mm Height:440-770mm Bed board size:1950x840mm(LxW),thickness:1.2mm Side rail size:1500x415mm(LxH),weight:3.8kgs Frame tube size:30x60mm,thickness:1.5mm ABS head and foot board weight:7.2kgs/pair Castor size:5(12.5cm),weight:5.4kgs/4pcs Capacity weight:400kgs Other Packing size:2190*1050*520mm,1pc/box Gross weight 128kgs Net weight120kgs
Three function Electric hospital bed Model: ALK06-B02P Size:L2130*W980*H480-720mm Angle of back section: 0 ~ 70 (±5) Angle of leg section: 0 ~ 30(±5) Adjustable height: 480-720mm 1 Cold steel plate wholly molded surface. 2) Integrated stamping frame and treated with electrostatic spraying, anti-aging and anti-rust 3 ABS bed head, side rail with 6 aluminum bars fence can go up and down. 4 3pcs electro-motor, 1pc control box 5 One set of handset 6) 5" universal castors with brake 7) Battery back up 8) Standard ccessoreis:1pc of I.V pole
2130*970*540mm 2-function: 1) Backrest max upward angle: 75 2) Footrest max upward angle: 40 1) Overallsize (L*W*H):2130*970*540mm 2) Durable frame: made of cold-rolled steel plate, treated by electro-coating and powder-coating 3) Detachable ABS headboard/footboard, with plastic patient name card 4) 4-part Steel bedboards 5) 6-crank Al-alloy handrails 6) Fully tested sturdy construction capable of taking a maximum user weight of up to 250kg 7) Four silent wheels with cross brakes,125mm 8) With one ss height adjustable I.V pole, with Drainage hook
Available in 100% Cotton, Micro Fiber Fabric, or Poly Cotton fabric In Percale, Soft Sateen, or any other customized constructions. 1 set that includes : 1x Flat Sheet or Comforter, 1x Fitted Sheets, 2 or 1 x Pillowcases, Customization is Available in construction, sizes, packaging, and design. Offers extra softening, whitening, and shrinkage-controlled processes, if the customer is interested.
Our Company is a well-known name in the industry we are engaged in offering the best quality� Alfalfa Hay Bales. Our offered products are prepared using the latest technologies. These products are offered at very affordable rates. The size is (16 x 27 x 32 inch), wherein the approximate bale weight of each bale will be 50 Kgs. Technical Specification: Protein: 16% to 22% Fat: 1.5% to 2.5% Fibre: 24% to 32% Ash: 2.5% to 6% Moisture: 10% to 12% As in reference to the supply of Alfalfa Hay, we would like to share following details related to same: Alfalfa Haying Process is done through Sun Drying Process, which is called Sun Curing Process. The haying process is totally manual and labour intensive process. The dry matter recovery is variable in nature. The dry matter means the hay residue of the same The pricing will fluctuate based on the dry matter recovery. The baling is done with a static baler in fixed size. During the sun curing process, the green pigments are lost. Which is a direct loss of Vitamin AD3. In order to avoid the loss of green pigmentation and core vitamin value of the forage, two-stage haying is executed by HAF�®. Stage One is direct sun curing and in Stage two passive sun curing is done in Net House. During the second stage of sun curing, high water content forage on drying process turns to Bottle Green Colour (which visually looks blackish green). Sometimes lump formation is evident in hay bales and its because the hay in post sun curing process reaches to Moisture level around 6% or 7 %. During the baling process, a mild spray of saline water is applied to the hay (which adds 0.34% Moisture). That enables the appropriate binding process of � the double-compressed bales. The usage of saline water (instead of regular water) for spraying prevents the microbial and toxin growth in the hay. Internationally accepted standard of Moisture in hay is 17%, whereas our hay has Moisture not above 9% in total. The shelf life of the HAF Alfalfa Hay is 30 Months and its all because of its meticulous processing methodology The bales must not come in direct sun light. Due to Photosensitivity, the green leafy material may loose green pigments. The standard weight of the Bale will be 45 Kgs or 50 Kgs, depending on the volume of the dry hay.
Hotel and hospital supplier , bed linen plain or strip with deferent tc like 250 ,300 350 250, or less . napkins with deferent color and sizes .table cover stretch and plain chair cover stretch and plain kitchen cloth. iron board , irons room kettle's safe box for room . bath room amenities slippers . bath towels .face towels hand towels. pool towels bath robe terry and waffle . etc.We are supplying the whole sale price tour clints
Technical Specifications External Dimension - 2075L X 1000W (in mm) Bed Frame - 2015L X 945W (in mm) Matress Platform - 1870L X 825W (in mm) Standard Height - 600 mm Backrest Angle - 0-75* (+/- 5*) Kneerest Angle - 0-45* (+/- 5*) Safe Operating Load - 150 Kg (Inc. Mattress & Accessories) Patient Working Load - 125 Kg Technical Configratation Linear Motor Crank Mechanism (Backrest, Tilt Trendelenburg & Rev.Trendelenburg ) - 2 pcs Diagonal Lock Single Wheel Caster (125 mm) - 4 pcs Polymer Head & Foot Board - 1 Set MS Dropdown Side Rail - 1 Set 100 mm Dia Wall Bumper Wheel - 4 pcs IV Pole - 1 Set IV Pole Provision - 4 pcs Mattress Platform with Metal Top - 1 Set Mattress Arrestor - 4 pcs
Technical Specifications External Dimension - 2075L X 1000W (in mm) Bed Frame - 2015L X 945W (in mm) Matress Platform - 1870L X 825W (in mm) Standard Height - 600 mm Backrest Angle - 0-75* (+/- 5*) Kneerest Angle - 0-45* (+/- 5*) Safe Operating Load - 150 Kg (Inc. Mattress & Accessories) Patient Working Load - 125 Kg Technical Configratation Linear Motor Crank Mechanism (Backrest, Kneerest,Tilt Trendelenburg & Rev.Trendelenburg ) - 3 pcs Diagonal Lock Single Wheel Caster (125 mm) - 4 pcs Polymer Head & Foot Board - 1 Set Aluminium Alloy Foldable SS Side Rail (H Type) - 1 Set 100 mm Dia Wall Bumper Wheel - 4 pcs IV Pole - 1 Set IV Pole Provision - 4 pcs Mattress Platform with Metal Top - 1 Set Mattress Arrestor - 4 pcs
Technical Specifications External Dimension - 2145L X 1100W (in mm) Bed Frame - 2085L X 1040W (in mm) Matress Platform - 1890L X 860W (in mm) Minimum Height - 520 mm Maximum Height - 780 mm Backrest Angle - 0-75* (+/- 5*) Kneerest Angle - 0-45* (+/- 5*) Safe Operating Load - 150 Kg (Inc. Mattress & Accessories) Patient Working Load - 125 Kg Technical Configratation Linear Motor Crank Mechanism (Backrest, Kneerest, Height & Tilt Trendelenburg & Rev.Trendelenburg ) - 4 pcs Diagonal Lock Single Wheel Caster (125 mm) - 4 pcs Polymer Head & Foot Board - 1 Set Aluminium Alloy Foldable SS Side Rail (C Type) - 1 Set 100 mm Dia Wall Bumper Wheel - 4 pcs IV Pole - 1 Set IV Pole Provision - 4 pcs Urine Bag Holder - 2 pcs Mattress Platform with Metal Top - 1 Set Mattress Arrestor - 4 pcs
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
We have a great range of new and used marine accessories. We are also main dealers for outboard engines . Outboard Services and Marine Ltd are based on the south coast of Cornwall. We have a great range of new and used marine accessories. We are also main dealers for outboard engines, OUTBOARD BOAT ENGINE WHOLESALE We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them. WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW. EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. item value Condition New Engine 4 Stroke Fuel Type Gasoline Cylinders 6 Engine Position OUTBOARD Dimensions (L x W x H) (mm) 1266 x 729 x 1179 Brand Name Outboard Engine Boat Motor Model Number Outboard Engine Boat Motor Engine type 4 Stoke Product Name Outboard 4 Stroke Displacement 52cc Starting system Manual Warranty 1 Year Type 4 Stroke Model Control System Tiller Control Color Black Application Marine SHIP Engine Model CM6D28C engines, OUTBOARD BOAT ENGINE WHOLESALE, We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them. WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW. EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. OUTBOARD 4 STROKE Mileage one to two hours used Fuel Gasoline and Diesel Gears Manual and Authomatic Engine 4,6 and 8 Shaft long shaft 25 Colour gray and white Colour Choice of colours
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.