This 12 right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases. The right-angled SATA cable supports high-speed data transfers up to 6Gbps and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by Stccable.com's Lifetime Warranty.
The STC-P006 Right Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a right-angled SATA receptacle, providing a simple 18-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6Gbps when used with SATA 3.0 compliant drives. The right-angled SATA connection enables you to plug in your Serial ATA hard drive in hard-to-reach areas or tight spaces, while the low profile and flexible design of the cable improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool. Constructed of only top-quality materials and designed for optimum performance and reliability this 18â?³ SATA cable is backed by our lifetime warranty.
The Left Side-Angled SATA Cable (18-inch) features one straight and one left side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports - ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low-profile design that helps improve airflow and reduce clutter in your computer case, which helps keep the case clean and cool. Constructed of only top-quality materials and designed for optimum performance and reliability this 18³ SATA cable supports full SATA 3.0 bandwidth (up to 6Gbps) when used with SATA 3.0 compliant drives and is backed by our lifetime warranty.
This 18in right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases.
The right-angled SATA cable supports high speed data transfers up to 6Gbps and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by Stccable.com's Lifetime Warranty. Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps.
This 18in right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
STC SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration.
This 18in right-angled latching SATA cable withTransparent green features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature. Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases. The right-angled SATA cable supports high-speed data transfers up to 6Gbps and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by Stccable.com's Lifetime Warranty.
This 0.15m 4-Pin (LP4) Molex to Right Angle SATA power adapter cable features one 4-Pin Molex (LP4) male connector and one (female) right angle SATA power connector, allowing you to power a Serial ATA hard drives from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive. This Molex to Right Angle SATA adapter is backed by Stccable.com's Lifetime Warranty. SERIAL ATA CABLE 6 Inch Power Converter Cable This 6" cable is used for powering serial drives. Serial ATA drives have a special 15 Pin Power connector which converts it to the standard 4 Pin Used on most power supplies. This cable is required for all Serial ATA Devices.
The STC-P037 0.3-meter (30cm) SATA Data Extension Cable enables you to extend the reach between internal SATA drive connections by up to 30 cm (11.81 in). The extension simplifies drive installation by overcoming typical connection limitations, and it reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.Constructed of only high-quality materials and expertly designed for reliability and peak performance, the 30CM cable is backed by a Stccable.com lifetime warranty.
The STC-C046 20 cm 90 degree left angle USB 2.0 A Male to A Female Extension Extender Cable features 1 USB A male left angle connector and 1 USB A female connector, extending the connection between USB 2.0 devices, When setting up a system with limited space, it will be very beneficial if there is an angled cable that can be squeezed in the smallest space without having to bend it in a way that would affect the cableâ??s performance. we offer a large selection of USB-angled cables that are categorized into a left angle, right angle, up angle, and right angle. Length: 40cm 20cm 10cm or customized.
1>USB extender cable allows you to extend the cable connection between a Computer (Mac/PC)/ Windows tablet and Most of USB-enabled devices, such as keyboard, mouse, camera, printer, external hard drive, USB Flash Drive, card reader, VoIP phone and more. 2>Perfect for lengthening a device connection when the charging cable is too short; Keep it at the desktop or anywhere to protect the USB ports of the tablet or PC from possible damage; No more crawling under the desk to plug something into the PC.
This male-to-female cable extends the reach of the Micro-USB port on your tablet or phone by 20 inches and is compatible with both OTG (USB On-The-Go) and MHL (Mobile High-Definition Link) adapters. Plus, the cable offers an easy way for you to connect your tablet to an Android docking station which means you can listen to music and charge your tablet using your phone dock. The extra length of the cable enables you to position USB 2.0 peripheral devices as needed. Simply connect the micro usb extension cable to your phone or tablet and plug your OTG or MHL adapter into the cable. With an additional 20 inches, you have extra room for placing your USB OTG-capable devices in a way that best suits your needs. You can place your thumb drive out of the way, or position devices such as your keyboard or mouse more comfortably. When connecting an MHL adapter or a Micro-USB charge-and-sync cable it can provide the extra length you need for connecting to an HDMI or Micro-USB cable that's just out of reach.
1>The mini USB female comes with 2 mounting holes for one mounting plane or panel. Secure the cable with two screws. This is the unique feature of the cable, which is different from others. 2 screws in the package. 2>Wrapped copper. 28AWG/1P + 28AWG/2C. 3>Data & Current. mini USB fulfill 2A current and 480Mbps data.
Gives you the flexibility to custom build your PC by adding an extra 8 inches to the P4 connector on your Power Supply Easy to use and install
3.5mm Audio Extension Cable STC Premium 3.5mm extension cable could extend any 3.5mm auxiliary jack up to a longer length. It brings your favorite music by connecting your mobile devices, like iPhone, iPod, or any MP3 player to a car stereo or speaker system. The perfect quality lets you enjoy a wonderful life. The slim metal case connector allows you to plug it into your source device without taking off your mobile/Tab case.
Place of Origin: China (Mainland) Brand Name: ZMS Model Number: 70mm2 welding cable Insulation Material: Rubber Type: Low Voltage Application: Industrial Conductor Material: Copper Jacket: Rubber specification: welding Product Name: welding cable 75mm2
This 6ft Extension Cable features one 3.5mm Male audio and one 3.5mm Female audio connectors, allowing you to extend a computer audio connection by up to 6ft. This cable offers a cost-effective way to position computer speakers etc. as needed, without having to worry about stretching the audio cable. Constructed of high-quality materials and designed to provide a dependable audio connection, this high-quality 6ft 3.5mm audio extension cable is backed Lifetime Warranty.
