FAS Hamburg Quantity: 2-4 load per month Origin: Germany Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
370$/MT FAS Hamburg LDPE film on bales 98/2 grade Germany Origin 100-200tons per month Loading weight 18-20Mt/40'HC Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
OCC GRADE WASTE PAPER Place of Origin L JAPAN, US, EUROPE Product Group Materials : Occ Scraps Application : Duplex Board Type: Occ Paper Scrap Color : Multicolor Unit : Ton/Tons Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Shipping Lines : Ocean shipping Estimate Lead Time : 15 - 20 days Shipping Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bale (1 .2-1.4 Tons/Bale), 20-25 Tons loading 40FT container
PA66 FR regrind black color Pa6 / pa66 is mainly applied as follows: 1. Improves nylon water absorption and improves size stability of the product. 2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries. 3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement. 4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress. 5. Improves nylon wear resistance to meet high wear resistance requirements. 6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications. 7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines. 8. Reduce nylon cost and improve product competitiveness. Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality. MATERIAL : PA66 FR regrind black color CATEGORY : PA66 FG TYPE : Regrind GRADE : Black color SPECIFICATION : GF50. 1 full container available Origin : Tunisia LOADING WEIGHT 23 Ton FOB (USD/Ton) : 750$ - 950$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales If your company is interested to make a deal, please do contact us. We are waiting to hear from you.
We are interested to supply 200 tons of Mixed Color LDPE Film Scrap in bales on a monthly basis. We wish to make a long term scrap business deal with the reliable LDPE Film Scrap buyers from all over the world. Materials : LDPE Place of Origin : JAPAN, US, EUROPE Color : Mix color Application : Film Bag and Pipe Grade : Film Type : Post Industrial Waste Quality : Clean and 2-3% shortage Form : Film Unit : Ton/Tons FOB Price : $200.00 - $300.00 Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Price Term: FOB Port of shipment: Sendai Port Estimate Lead Time : 15 - 20 days Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales If your company is interested to make a deal, please do contact us. We are waiting to hear from you.
WE MAY HAVE THE COAL OR PET COKE THAT YOU ARE LOOKING FOR. WE ARE CURRENTLY SHIPPING AT THIS TIME AND WELCOME AN OPPORTUNITY TO BE OF SERVICE. PLEASE SEND US FULL SPECIFICATIONS OF WHAT YOU REQUIRE AND TARGET PRICING. # Description Comments 1 Coking Coal Low Vol, Mid Vol and High Vol Coal Tonnage Available 65K MT-100K MT/Month/36 Months Delivery Port East Coast USA (Norfolk or Baltimore) 2 Thermal Coal Sulfur:
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Electric scooters, e bike, bikes, bike parts, scooter parts, tires,tubes, papers, filters, air pumps, rickshaws, bikes etc.
We at GREENLAND FRESCO procure Peanuts in the most professional way and always ensure that fresh and healthy products are delivered to our clients. We keep pace with the latest technology and market requirements to ensure stability & sustainability towards fulfilling the clients demand. We have built a cost-effective and reliable supply chain to deliver Java & Bold varieties of Peanuts in one click. We maintain aflatoxin level & moisture content at minimal level. Peanuts are processed at processing plants to obtain the required specifications specified by our clients. Specifications of Bold / Java / Blanched Bold / Blanched Java Peanut kernels : - Type - Peanut kernels Peanuts counts per Ounce - 38/42, 40/50, 50/60, 60/70, 70/80 Origin - India Admixture - 1% max Oil content - 42% - 48% max Foreign Material - 0.50% max OR 1% max Moisture - 7% max OR 8% max Aflatoxin - Aflatoxin negative 5/10 PPB Gross Wt. per Bag - 10/15/25/50 Kgs Packaging Material - New Jute Bags Load Ability : One 20" FCL can load 19 MTS or 380 Bags of 50 Kgs New Jute Bags One 20" FCL can load 19 MTS or 760 Bags of 25 Kgs Vacuum Bags New vacuum pack inside and outer layer with PP woven bags 25 Kgs Gross Specifications of Peanuts in Shell Bold / Java : - Type - Peanuts in shell Bold : HPS- Ground nuts Peanuts bold shell - 18/22, 20/24, 22/26 Counts/Ounce Origin - India Moisture - 6-8% Max Admixture - 1% Max Imperfect - 5% Max Aflatoxin(B1+B2+G1+G2) - 5-10 ppb (as per clients specifications) Packing - In Strong Jute Bags of 30 Kgs Net/Gross Each One 20" FCL can load 12-14 MTS One 40" FCL can load 19-20 MTS Health Benefits 1. Peanuts have a strong nutritional Profile 2. Peanuts can reduce the risk of Heart disease 3. Peanuts are excellent source of plant based protein, fiber and many key vitamins and minerals. 4. Peanut consumption reduces the risk of weight loss and obesity 5. Peanut consumption reduces the risk of colorectal cancer
Electronic specification: MotorDifferential speed motor 500W Battery48V20AH/60V20AH sealed lead-acid battery All battery with electric protection circuit Dashboardcommon meter Controller500W Brushless controller Charger110-240V 50-60HZ Charging time8~10 hours LampLED Performance & Main components: Max speed25km/h Range55km (distance by riders weight,terrain,road surface etc.) Max load110KGS Tyres300-10 tubeless Front brakedrum brake Rear brakedrum brake Climbing angle
Overproductions, Short dated Expiry Dates, False Printing in Packages, Many reasons exist for access stocks in German food Currently available of German branded trademarks for Export only: Soup in cans (truckloads) Fish in cans (various pallets) Salt Sticks (1truck) Ice cream (truckloads) Jam (1/2 truck) Cidre (2 trucks) Farine (5 trucks) Cornflakes (3 trucks) Candies and Sweets (2 trucks) Tea (1 truck). In the last 20 years the Warendhandels-Contor Uetersen Gmbh became one of the leading specialists for stockclearance and closeouts in Germany. Our main business is the export of Stocklots and Leftovers Remaining of promotion items Rejects and Overproductions Returned goods, goods from insured loss or insolvency Our product range: Textil and Clothing (Underwear, Socks, Trousers, Jackets etc.) Houshold articles in general Food in general incl. frozen goods Stationery Electrical items Our suppliers belong to the most important manufacturers and retail chains. Our professional way of dealing with stocklots and overflow has made us to one of the most reliable and leading Problem Solvers in German Industry & Commerce.
Color index, number : 18 Hot alcoholInsolubile,% : 1.00 Application: 1. The plasticity and castability of heating, combined with its ability to absorb a large amount of infiltrated material, is of great value in the casting industry. 2. The lac resin is non-toxic. Based on the excellent characteristics listed above, the shellac resin is applied to alcohol paints, electrical insulating materials, printing inks, rubber fillers, and its use for oil and acid resistance. 3. Other industries: It has a wide range of important application value in many fields such as medicine, food, cosmetics, chemical industry, metallurgy, machinery, woodware, papermaking, electronics and military industry.
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
Color - White/Yellow Melting point - 62-67 Acid value - 5.0mg/g-8.0mg/g,16.0 mg/g-23.0 mg/g Saponification value - 75.0mg/g-110mg/g Iodine value - 8.0g/100g-13.0g/100g Benzene insoluble - 0.3% 1. Cosmetics: excellent adhesion, permeability and emulsification, widely used in face cream, snow cream, lipstick, hair oil,eyebrow pencil, eye shadow, etc. 2. Food: used by food and family as barbecue oil, cooking wax, and mold release agent for processing Chinese and western dim sum and confectionery. 3. Medicine: widely used as ointment base material, Chinese patent medicine auxiliary material, soft capsule polishing. 4. Other industries: it is also widely used in the electronic industry, electric power industry, printing industry, leather industry, ink industry, oil agent industry and candle industry.