Generators, light towers, fuel tanks.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Beef Cattle Feed (BC-060416) Product Details : Crude Protein (% Minimum) : 16 Crude Fat (% Minimum) : 4 Crude Fibre (% Maximum) : 8 Moisture (% Maximum) : 12 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Low Yielding Cattle Feed We are involved in producing an exclusive range of� Low Yielding Cattle Feed.� These products are prepared using the best quality ingredient and tested on various quality parameters in order to ensure their optimum quality. Apart from this, we offer these feeds within a committed period of time. Product Details: Crude Protein : 16.0 % Minimum Crude Fat : 2.0 % Minimum Crude Fibre : 14.0 % Maximum Acid Insoluble Ash : 5.0 % Maximum Moisture (%) : 12% Maximum General Details: Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Net Weight : 39 Kgs When Packed Product Branding : HAF Product Form : Coarse Mash Form / Pellet Form Form : Granule
Commercial Beef Stock Feed (BC-220220) Product Details : Crude Protein % : 20 Crude Fat % : 2 Crude Fiber % : 8 Moisture (% Maximum) : 12 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Parrot Maintenance Feed (PTF-010717) Product Details : Crude Protein % : 16.5 Crude Fat % : 7.0 Crude Fiber % : 3.1 Moisture (% Maximum) : 12.0 Metabolizable Energy kcal/kg : 3075 Crude Ash % : 4.9 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) - 12 Product Form : Coarse Mash Form / Pellet Form Product Branding - HAF Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Breeder Developer Duck Feed (D-040215) We rule the industry by offering a broad array of� Duck Breeder Developer Feed� that is highly appreciated by our valuable customers. Our product is prepared using high-grade ingredients that are bought from the famous vendors. This product is verified on quality parameters to guarantee our patrons requirement satisfaction. Product Details: Crude Protein (N x 6.25)(maximum %) : 14.5 Crude Fat (maximum %) : 2.0 Crude fibre (maximum %) : 7 Acid-insoluble ash(maximum %) : 4.0 Moisture (maximum %) : 12 General Details Specification Ingredients : Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF�® Net Weight : 39 Kgs When Packed
Parrot Breeder Feed is hygienically produced to meet international quality standards and is known for supplying critical nutrients to birds We use moistureproof packaging material to keep the product fresh for as long as possible We provide our clients with the highest quality Feed which is generally praised for its superior quality and 100 vegetarian nature This variety of Parrot Breeder Feed may be stored for a longer amount of time because it is made entirely of vegetarian feed items that are free of microorganism contamination Parrot Breeder Feed PTF020821 Product Details Crude Protein 205 Crude Fat 80 Crude Fiber 24 Moisture Maximum 120 Metabolizable Energy kcalkg 3300 Crude Ash 60 GENERAL DETAILS Ingredients Corn Gluten Meal Wheat Gluten Soy Meal DDGS Pluses Essential Amino Acids Vitamins Minerals Trace Minerals Toxin Binders and Mold Inhibitor Ingredient Profile  100 Vegetarian Moisture Maximum 12 Product Form  Coarse Mash Form Pellet Form Product Branding HAF Net Weight 39 Kgs When Packed Product Pricing On Unit Basis for each 39 Kgs Packing Production Capacity per Day  450 MTDay Factory Visit  Not Permissible Fumigation  Aluminum Phosphide or Methyl Bromide or any as per buyer specification Clinical Test Methodology  As per IS2052 Proximate Analysis on Dry Matter Basis
Sheep Feed Mash (S-030416) Product Details : Crude Protein: 16.0 % Minimum Crude Fat : 4.0 % Minimum Crude Fibre : 8.0 % Maximum Ash : 6.6 % Metabolizable Energy : 12.0 mj/kg Usage The High energy ratio in the sated ration provides optimum growth and health. Very useful for providing extra warmth in cold condition. GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Peanut Hay Pellets are produced from Sun Cured Peanut Hay of Indian Origin. The Hay is passed through a Complex Process of Production, wherein required Steam and Cooking of the Hay is done. Removal of Toxic and Hazardous Contents is done to maximum possible extent. Being an Agro-Based Derivative, the nutritional value of the Hay Pellets is highly volatile in Nature. Due to efficient Production System the Volume of the Hay is densified to a maximum possible extent. The final product is absolutely� suitable for feeding Dairy and Meat Livestock and other Domestic Farm Animals. Product Details: Crude Protein : 12% to 16% Crude Fat : 1.5% to 3% Crude Fibre : 15% to 20% Ash : 3.5 to 5% Moisture : 12% Maximum GENERAL DETAILS� � Ingredients : Sun Cured Peanut Hay of Indian Origin Ingredient Profile : 100% Vegetarian Moisture (% Maximum) : 12 Product Form : Pellet Form Product Branding : HAF�® Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Beef Stock Feed (BC-190220) Provided Beef Stock Feed has been produced from ingredients like pulses, vitamins, corn based gluten meal, toxin binders, trace minerals, dried distillers grains with soluble corn, mold inhibitor, minerals and essential amino acids. Product Details : Crude Protein % : 20 Crude Fat % : 1.75 Crude Fiber % : 12 Moisture (% Maximum) : 12 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology : As per IS:2052 Proximate Analysis on Dry Matter Basis
Turkey Finisher Feed (T-050317) (Feed from 18 Weeks to Finish) Product Details : Crude protein (N x 6.25) (maximum %) : 16.4 Crude Fat (maximum %) : 2.9 Crude fibre (maximum %) : 3.2 Moisture (maximum %) : 12 Acid-insoluble ash (maximum %) : 4.6 Salt (as NaCl) (maximum %) : 0.6 GENERAL DETAILS Ingredients : Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile : 100% Vegetarian Moisture (% Maximum) : 12 Product Form : Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight : 39 Kgs When Packed Product Pricing : On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day : 450 MT/Day Factory Visit : Not Permissible Fumigation : Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology: As per IS:2052 Proximate Analysis on Dry Matter Basis
Supplementary Cattle Feed (C-060322) Product Details : Crude Protein: 22.0 % Minimum Crude Fat : 3.00 % Minimum Crude Fibre : 12.0 % Maximum Acid Insoluble Ash : 4.5 % Maximum Moisture: 12 % Maximum GENERAL DETAILS Ingredients: Corn Gluten Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :� 100% Vegetarian Moisture (% Maximum) - 12 Product Form :� Coarse Mash Form / Pellet Form Product Branding -� HAF Net Weight :� 39 Kgs When Packed Product Pricing :� On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day :� 450 MT/Day Factory Visit :� Not Permissible Fumigation :� Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology :� As per IS:2052 Proximate Analysis on Dry Matter Basis
