Air handling unit (ahu) 8 different models which provide required humidity and temperature by conditioning air volume in wide ranges. Standard series Application area: business centers, schools, hospitals, factories, hotels and restaurants. 8 different models which provide required humidity and temperature by conditioning air volume in the range of 3000m¦/h and 100.000 m¦/h. The framework which is formed by combination of aluminum frames, which are connected specially, with plastic and aluminum comers. Boards which are made up of double skilled galvanized iron in a standard way. Polyurethane insulated panels, which are 30 mm in thickness, for thermal and acoustic insulation in a standard way. Standard accessories; Filter chambers; chamber design which provides easy mounting and de-mounting in filters and filters with different productivity levels on demand. Heating and cooling coils; seamless cooper tubes. In heating coils, 4 options: warm water, vapor, hot water, electrically heated; in cooling coils, 2 options: chilled water and dx (direct expansion). Dampers; rigid aluminum frame in multi airfoil structure which is the least resistant against airflow. Rubber gaskets which reduce air leakage through blades to the minimum level. Fans; statically and dynamically balanced aspirators and ventilators in double inlet belt driven centrifugal type. Forward curved fans in systems with low, medium and high duct pressures, . Optional accessories; Gonka vapor humidifier, standard vapor cylinder, immersion electrodes, stainless vapor distributor and microprocessor control unit. Mufflers which are made up of coulisses to provide required sound holding capacity. Plate heat exchanger or heat recovery wheel for recovery of the heat emitted with exhaust air. Electrical board. Frequency converter Depends on the size, model and chambers
NOB CISCO3925E/K9 CISCO3925E ROUTER-------2400Euro MARK LEVINSON 533H USED------5000Euro MANLEY VOXBOX PREAMP/VOICE PROCESSOR----1800Euro DOLBY CP-750 Stereo Digital Cinema Processor--1400Euro Dolby Lake LP4D12 Processor DLP-----1700Euro LAB GRUPPEN PLM20000 DSP AMPLIFIER - USED----5000Euro Lab Gruppen PLM 10000Q SP-----3500Euro Lab Gruppen PLM 14000-----4000Euro Ampeg B15 Heritage Series Bass Combo Amplifier HB-15-----1600Euro BSS OMNIDRIVE COMPACT PLUS FDS-366T-----1200Euro L ACOUSTICS LA48/LAB GRUPPEN FP6400---1000Euro Lab Gruppen FP2600 with only 3 hours of use----700Euro KLARK TEKNIK DN9848 LOUDSPEAKER PROCESSOR----1500Euro DBX 160SL Blue Precision Stereo Compressor/Limiter---1500Euro Eventide H-3000-se Studio Ultra Harmonizer Effects Processor---Euro500 Hhb Cdr-850 Cd Recorder ---400Euro Empirical Labs EL8X-S Distressor Stereo Pair---1200Euro Tc Electronic Finalizer 96k Studio Mastering Processor---700Euro Drawmer 1961 Vacuum Tube Equaliser---Euro1000 Bss Audio Fds-334T Minidrive Loudspeaker---300Euro Bss Audio Fds-366t Omnidrive Compact -----1300Euro BSS FCS-960 Dual Channel/Mode Graphic EQ--700Euro Dolby Lake Contour Dsp 2 X 6 Speaker Processor--700Euro Lab Gruppen Plm20000Q/Bp Plm 20000Q Powered Loudspeaker Management ---4000Euro Lab Gruppen PLM 10000Q/SP Powered Loudspeaker Management System---3500Euro Xta Dp 226 - Dolby Lake Contour Dsp 2 X 6 Dsp With Aes Ebu Digital---600Euro Lab Gruppen PLM 14000-----4000Euro Lab Gruppen Plm14000/Bp 2X22550W 8 Ohm Binding Post Power Amplifier----3800Euro DBX DriveRack 4820 4X8 Loudspeaker Management System---1200Euro DBX DriveRack 4820TI 4X8 Loudspeaker Management System----1900Euro DBX DriveRack 4820TIO - Complete Equalization and Loudspeaker Ma---2500Euro dbx 4820TO DriveRack Loudspeaker ------2000Euro dbx 4820 4800 w/ blank front panel DriveRack---850Euro SE Electronics SE Munro Egg 150 Monitoring System-----950Euro Audio Technica M3 Wireless in Ear Monitor System AT-M3--300Euro Shure PSM 1000 | Personal Monitor System, Dual Receiver P10TR---1500Euro Sennheiser EW 300 IEM G3 Wireless In Ear Monitor System 566-608 MHz---400Euro Shure P9TRA Wireless In-Ear Monitor System----600Euro Sennheiser EW 300 IEM G3 Wireless In Ear Monitor System 566-608 MHz----300Euro
A series EAGLE is composed of two models for electrosurgery which can all be connected to an independent Argon gas module and max. powers of 400 W and 280 W; there is also one model for electrosurgery which built in Argon gas and max. power of 400 W. The units have got 17 currents: 10 for the monopolar usage and 7 for the bipolar usage. Three for the monopolar cut, Three for the monopolar cut, Four for the monopolar coagulation, Two for the bipolar cut, Two for the bipolar coagulation, Two for the bipolar coagulation, One for the coagulation / sealing of big vessels. All the output currents are completely self controlled through a micro-processor with three different systems: - ADC System - APC System - Starting impulse control, which electronically checks the starting pulse of the cut currents. The EAGLE models are equipped with a circuit that can verify the connection/contact of the neutral electrodes ônon Splitö type with a single section and ôSplitö type with a double section with interrupts delivery of the power and luminous acoustic alarm signal. The units can be used with one double pedal footswitch, which allows the activation of the monopolar or bipolar functions, and with a second double pedal foot-switch, which is indicated for the independent activation of the bipolar functions only. The all models allow memorizing and then selecting through a simple button 100 complete functioning programs and are equipped with: two monopolar outputs, which can be used at the same time by two different operators through the Twin activation device; two bipolar outputs. All models are equipped with an auto-check system at double microprocessor: - Main Auto-Check, main auto-diagnosis procedure at the switching-on. - Standard Auto-Check, continuous check of all the functioning parameters during the usage. - Immediate interruption of the functioning with contemporary alarm signal for the operators through specific Error Codes HF Leakage Control, check of the high frequency leakage currents to earth. Auto-Check Argon section. Automatic output of the right modulated and pulsed spray coagulation when the Argon gas coagulation is activated independently from the type of coagulation selected for the simple electro-surgery, and selfcompensation of the gas flow according to the diameter of the electrodes, with a perfect control of the penetration depth. The units can be equipped with automatic activation aspirators that guarantee the efficacious and silent elimination of smokes or electro-surgical aerosol.
Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
Stringed musical instruments: violins, viola, cello, double bass, guitar.
Hardwood flooring, softwood flooring, engineered wood panels, acoustic products.Shipping
Ceramic tiles, slatwall panels, CNC designs, acoustic panels and perform perforation o.
Roller Shutter, Fire Rolling Shutter, Acoustic Roller Shutter, Fire Rated Roller Shutter, Hangar Door, Indsutrial Roller Shutter, Fire Fix Window.
We import and distribute melamine foam blocks for acoustic insulation in EU, UK, Turkey, LATAM, India. Different colors and grades available.
Acoustic panels and skirtings.
My name is Adela Pacalu and I am a Sales Representative at the company Hora, from Romania, which is the biggest factory for bowed instruments and guitars in Europe. I can summarize in a few words, that our company exports 80% of its musical instruments production all over the world, to well-known specialized companies from the European Union, Japan, Australia, United States, Russia - to name only a few. I would also like to mention that we have good quality at affordable prices and all range of instruments: from student, advanced, professional and even to master (highest degree). Our purpose in the near future is to enter also in the African musical instruments market by finding wholesalers for our instruments. I send you below a link to our online catalog, where you may see our products, their description and the material they are made of:
Laminated glass, tempered glass, glass for railing systems, balconies, winter gardens, verandas, balustrades, canopies, glasses for aluminium systems, bent glass, isolation glass, solar panels, architectural glass, safety glass, bulletproof security glass, acoustic glass.Manufacturing
These WCs, which are specially designed, are made with special materials.
These types of glass are used to redesign and divide large areas. The glasses used can be designed as a single-sided mirror and divide an area in two.
These glasses which are used for protection and decoration purposes are produced by Erdem Cam as specific to mimer and provide an elegant appearance to indoor and outdoor areas.
These doors are designed in a space-specific manner and manufactured in harmony with the architecture. The doors produced have an elegant appearance and are produced as skids.
Glass vaults are specially designed entrance and roof systems designed for every place.
These glass systems are used to cut the wind on door entrances, cafe sides and glass balconies.
Glass Film is used to limit the appearance, to provide decoration and to attract attention in divided areas.