Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Desription: 1) 100% optic test: Insertion Loss: 0.3 (PC); 0.2 (APC); 0.2 (UPC); 0.3 (SPC); 2) 100% optic test: Return Loss: 45 (PC); 60 (APC); 55 (UPC); 50 (SPC); 3) Excently qualified standard PC, APC, UPC, polishing 4) Simplex and duplex connector available 5) High precision of mechanical dimensions 6) Good exchange ability and good durability;
Description: Composite or Hybrid Cables are cables that have a number of different components laid up within the bundle. These types of cables allow for multiple transmission paths by various components, whether they be metal conductors or fibre optics, and allow the user to have a single cable, therefore reducing the overall cost and lead time for installation. Application: 1.Used in outdoor applications that require both optical fiber and copper wire elements for communication and power 2.Copper wire can power remote electronics used in fiber optic communications 3.Copper wire can also be used for low data rate data transmission 4.Deployable cables have been used in network and private broadcast applications around the world 5.Cables can be designed for your custom applications Note: 1.Different conductor specification can be make as required. 2.Different Fiber specification can be make as required.
Fiber optical cable. Tray 100 100 pcs 13.5*27*3 cm Inner box 20 tray/box 2000 pcs 29*29*22 cm Outer box 2 inner box/outer box 4000 pcs 60*31*25.8 cm.
The typical bow-type drop optical cable includes central optical fibers with 2 parallel KFRPs or steel wire as the strength members placed on both sides, a LSZH or PVC sheath is extruded outside.
Description: GJDFBV flat ribbon cable uses fiber ribbon as optical transmission medium, covered with aramid yarn as strength member, then extruded with a PVC sheath. Other sheath materials, like LSZH and TPU, are available on request. Application : 1. Ribbon fiber flexible connection jumper 2. Various indoor cabling solutions. Especially used in good laying conditions. 3. Interconnection between apparatuses Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
12cores, apply for duct, aerial, direct burial type single model fiber optic cable 3km per wooden drum fiber optic cable or by customer's require
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Feature: High tensile strength due to aramid strength member; Good flame retardant properties; Stable temperature performance; Excellent stripability with tight buffered fiber; High uniformity of geometrical characteristics. Application: Indoor riser level and plenum level cabling; Fiber jumper or pigtail; Indoor riser level and plenum level cabling; Interconnections between instruments and communication Equipment
Feature: Two single-fiber as basic unit , flat twin configuration; Single-cable with independent strength member; Tight buffer(900um or 600um). Application: Indoor riser level and plenum level cabling; Fiber jumper or pigtail; Indoor riser level and plenum level cabling; Interconnections between instruments and communication Equipment
Feature: High tensile strength due to aramid strength member; Compact structure, higher fiber density and excellent performance of flexibility and crush resistance; Excellent corrosion resistant, waterproof, flame retardant properties. Application: Ribbon fiber flexible connection jumper Various indoor cabling solutions Interconnection between apparatuses Applicable to high density interconnection of MPO or MTP connectors.
Product Description 1) Gel filled mulit loose tube provide good protection for the coating fiber 2 Steel wire/FRP as central tension strength 3) Good ultra violet radiation resistant 4) Double sheath and conrrugated steel tape armored..Good moisture-resistance. 5) Single mode G652D fiber type . APPLICATION 1) Adopted to Outdoor Direct buried,Aerial, Duct installation 2) Access network and local network in high electromagnetic interfering places. Information OF 12CORE GYTA53 FIBER CALBE No. of Tube 2Looses tube+4Filler tube No. of fiber/Tube 6Fibers No. of fiber 12 Fibers Approx. Cable Diameter 13.4~19.6mm Loose Tube Material PBT Filling compound (Tube) Thixotropic Jelly Strength Member Steel Wire or FRP Water Blocking Water Swell able Material Corrugated Steel Tape Nom. 0.25mm Thick. Outer Sheath Nom. 2.7mm Thick. Black MDPE Mechanical & Environmental Performance Tensile Strength Long Term: 1000N, Short Term: 3000N Crush Resistance Long Term: 1000N, Short Term: 3000N Bending Radius Long Term: 10D, Short Term:20D Storage Temperature -20~+60°C Optical Fiber Performance Fiber Type G.652D,125.0±1.0µm Mode Field Diameter 9.2 ± 0.2µm at 1310 nm Cladding Diameter 125 ± 1µm Cladding Non-Circularity: = 1% Coating Diameter 245 ± 10µm Attenuation Coefficient = 0.36dB/km at 1310nm, = 0.22dB/km at 1550nm Chromatic Dispersion =3.5ps/nm/km at 1285~1330nm, =18ps/nm/km at 1550nm Zero Dispersion Wavelength 1300~1322nm PMD Coefficient = 0.2ps/vkm
High Quality and Cost-effective 62.5/125um Multimode Fiber Patch Cable The 62.5/125um multimode fiber patch cable meets RoHS compliant, and all cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling. Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. Why choose us? 1. Sophenol's fiber optic patch cords include differen terminations like LC, SC/APC, ST, E2000/APC, MU, VF45, FC, MTRJ, SC, MPO, MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon, FDDI, etc. 2. Fiber optic patch cords are available for simplex, duplex and multicore with single mode 9/125 or multimode 50/125, 62.5/125, etc. 3. Various kinds of cable materials, PVC, Riser, Plenum, OFNR, OFNP, LSZH (LSOH), 10 Gig Aqua. 4. There are assemblies for simplex fiber optic patch cords, duplex fiber optic patch cords, multi fiber optic patch cords, and also ribbon fan out fiber optic patch cords and bundle fiber optic patch cords. 5. Typical fiber optic patch cords cable diameter can be 0.9mm, 2mm,or 3mm.?Sophenol also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. 6. High Quality and Cost-effective 9/125um Singlemode Fiber Patch Cable The 9/125um single mode fiber patch cable meets RoHS compliant. 7. All cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling. Quality Standard: ·Fire retardant conformity with IEC 60332-3C standard ·No corrosive gas emissions IEC 60754-2 standard ·Low smoke zero halogen emissions with IEC 61034-2 standard ·Use international standard LC, SC, ST, FC connectors, support simplex or duplex Features: ·100% pre-terminated and optically tested in factory to ensure transfer performance ·Meets or exceeds industry standards for return loss and insertion loss ·Manufactured using advanced automated assembly and polishing techniques ·Segmented boot for bend strain relief ·Use standard LC, SC, ST, FC connectors, support simplex or duplex ·Customized OEM products available Custom Assembly: ·LC, SC, ST, FC, MTRJ, and other customize connectors available upon request ·PC, UPC, APC polishings available upon request ·0.99mm, 1.2mm, 1.6mm, 1.8mm, 2.0mm, and 3.0mm diameters also available upon request ·Yellow, Orange, aquamarine, violet or customized color jackets and boots available ·Length and fibers according to request, and Pigtail available ·Simplex, duplex, uniboot, zipcord jacket, or armoured cable, etc. all available Item Details ·Connector: MTRJ to MTRJ ·Fiber Mode: 62.5/125um ·Jacket Color: Orange ·Jacket OD: 2.0/0.9/3.0mm ·Fiber Count: Simplex (1-fiber) and Duplex (2-fiber) ·Material: PVC/LSZH/OFNP ·Operating temperature: -20~75°C ·Storage temperature: -40~85°C
Description: In the hybrid fiber optic cable, single-mode/multimode fibers are positioned in loose tubes, which are made of high modulus plastics and filled with water-blocking materials. Loose tubes and required insulated copper wires are stranded around the metallic central strength member into a compact and circular cable core. For certain high fiber count cables, the strength member would be covered with polyethylene (PE). The PSP is longitudinally applied around the cable core, before a PE sheath is extruded over it.
Description: Loose Tube Optical Ground Wire is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs. Application:Aerial/ground(earth) wire. Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2.Specially designed Cable structure is available on request. 3.Cables can be supplied with dry core or semi dry core
Description Micro air blown fiber optic cable is mainly used in access network and metropolitan area network. By air blowing installation technology, without excavation surface in tiny pipe installation, also can be installed in the existing cable pipe,save pipeline resources, meet the real time capacity of the network. We communication provides the micro optical cable technology can reduce the early stages of the fiber optic cable construction cost,increase investment according to the demand of the network, to speed up the return on investment, is an good solution of FTTH. Note: 1. Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 3000m/reel: other lengths available on request.
In the structure of model gyxtw optical cable, the single mode or multimode optical fibers are jacketed by loose tube and the tube is made of high modulus polyester.Inside the tube, it is full of waterproof filling compound, in which no elemental hydrogen could be detected.Outside the loose tube, it is wrapped longitudinally by a layer of both sides plastic coated ripple steeltape and the waterproof material between th steel tape and loose tube is used to ensure compact optical cable structure and longitudinal waterproof.There are two parallel steel wires on the two sides of the loose tube and they are sheathed by pe to form an optical cable. Features of product: , ¨¨the remaining length of optical fiber is controlled precisely to ensure prefect mechanical performance and temperature characteristics of optical cable. 2¨¨the loose tube material itself has perfect hydrolysis resistance and high strength.The special filling paste inside the loose tube is used to protect the optical fiber. 3¨¨two parallel steel wires ensure high tensile strength of optical cable. 4 the medium density pe sheath features perfect mechanical tensile strength, weatherproof, abrasive resistance and good environmental stress cracking performance. 5¨¨the longitudinally wrapped both side plastic coated steel tapes and waterproof tape could effectively prevent tube from shrinking and improve optical cable waterproof, penetration resistance and moisture-proof. 6¨¨it is convenient in construction as its small diameter, light weight and perfect performance-price ratio. 3000m/roll or customized
Fiber optic cable
