Insulation Panels Suppliers and Manufacturers

Our company is providing EPS panels, sandwich panels using styrofoam. please contact us if you have any questions.

Application: Roofing,Wall,Prefab House,Cold Room,Warehouse,Workshop ; Thickness: 50/75/100/150/200mm ; Length: 1-11.8m ; Material: Color Steel Sheet&Polyurethane ; Temperature Range: -40~200 ; Life time: 30 years ;

Polyester fiber sound-absorbing decorative panels with sound absorption, noise reduction, noise reduction, thermal insulation, thermal insulation, thermal insulation and other effects, the material is symmetrical and reliable, is a wide band of high-efficiency sound-absorbing materials. So how do you install a polyester sound-absorbing panel When installing the polyester fiber-absorbent panel wall with reserved back cavity, you can use straight clip type light steel keel to do the back attachment keel. In a good solid wall attached to the wall keel, the polyester fiber board with glue, or nail the method of connecting with the light steel keel. It has good flatness and stability. Directly affixed to the solid wall is as follows. 1. Pay attention to plate selection and plate-layout before construction. Pay attention to slight color difference, find out the center point of the paste surface, draw cross line, adopt the way of bricklaying, and start to line up the board from the center point (it is best to wear gloves to avoid pollution). 2.Cut the board surface Use steel ruler and sharp knife to cut or decorate accordingly, if you want to reduce the seam, you can tilt the blade inward by 0.5 1mm when cutting to facilitate the board edge butt, and reduce the gap. 3.Paste (1) Cement or wood base surface: can choose non-benzene universal glue or white latex made of neoprene rubber. (2) Base surface of paper gypsum board: under the premise that it is not easy to be damp, you can choose white emulsion glue or wallpaper glue made of cellulose as raw material (should be fixed with nails immediately after gluing to avoid the glue is not dry and the board surface moves). (3) Under the premise of easy or possible moisture, you can use universal glue. Polyester fiber sound-absorbing panels are porous sound-absorbing materials, it is easy to absorb glue, blocking holes, affecting the cavity after the sound-absorbing function. It is recommended that when constructing, you can brush glue on one side (only brush glue on the base plate or keel, the amount of brush glue is slightly heavier than normal). At the same time, you can also match the grain nail reinforcement. V-groove wall panels are CNC machine-cut to create 45 90 grooves in the surface of the PET acoustic panels. The paper size can be customized. It is widely used as a wall panel in wall spaces. Our Poly acoustic panels are made from recycled PET, which is also fully recyclable for complete acoustic panels, and we can cut CNC cut and UV printed panels on the surface that are lightweight, fire resistant, impact resistant, tacky, easy to install, and most importantly have high acoustic performance.

Designer: Deco Sound Acoustic wooden slat wall panels are decorative wall panels made of a series of horizontal wooden slats that are joined together. These panels are designed to absorb sound waves and reduce the amount of noise that is transmitted through a wall or ceiling. They are typically used in spaces where sound control is important, such as in recording studios, home theaters, and offices. Acoustic wooden slat wall panels are made from a variety of materials, including wood, fabric, and foam. They can be mounted on a variety of surfaces, including drywall, concrete, and brick, using a variety of methods, such as nails, screws, or adhesive. The panels can be finished with a variety of coatings, including paint, stain, or veneer, to match the decor of the space in which they are installed. In addition to their sound-absorbing properties, acoustic wooden slat wall panels can also be used for decorative purposes. They can add visual interest and texture to a room and can be used in a variety of settings, including living rooms, bedrooms, offices, and retail spaces. They can be used as a standalone feature or can be combined with other wall-covering materials to create a more cohesive design. Acoustic wooden slat wall panels are a functional and stylish option for reducing noise levels and adding visual interest to a space. Overall Dimensions: 22mm x 605 x 2440mm Slat width: 25mm The gap: 15mm Key Features 1. Designed for both residential and commercial use 2. Class A sound absorption 3. FSC Certified real Oak veneered lamellas 4. Bonded to a rigid felt backing made from recycled plastic 5. Available in a 5 range of exclusive colors It was created with the purpose of improving people's favorite spaces. If you have ever been in a room with bad acoustics, then you know the problem bad acoustics can drive you crazy But now you can do something about it, while also improving the looks of your room. Imagine a slat wall on an end wall in your living room or on your ceiling. It would not only dampen the sound but surely it would also provide you with a steady flow of compliments from everyone who sees it. Wooden slats panel

Exterior House Wall Panels by BV7S-001 Wood Pattern Sandwich Panel is often using on mobile house, villa house, holiday house. Structure 3 layers: Surface: 0.3 mm Al-zn alloy coated steel sheet (Al 55%, Zn 43%) Middle: 16mm PU foam Back : Aluminium foil paper Size: Length (3000mm-6000mm) Width:380mm Thickness: 16mm Weight: 3.7kgs/sqm Application Sandwich panel is widely used for Exterior wall cladding and Interior wall Insulation and Decoration in the filed of PEB house, Villa, Steel Structure buildings, Hospital, Old Building renovation, School, Library, Supermarket, Plant, Train Station, Residence and so on!

lamination/ insulation /building materials / package material

Light weight wall panel. Wooden pallet with proper rapping packaging. 18 USD per one pallet of about 10-16 pcs in one pallet.

Aerogel Blanket Specification HT200. Aerogel insulation blanket with Aluminium foil, similar to Cryogel Z ( mainly used for the cold insulation, such as LNG, Working temperature from -190C-200C ), the thermal conductivity from 0.017-0.023 W/m.k Description: HT200 series aerogel blanket is a kind of flexible, low-temperature, and high-efficiency cold-proof felt. This material combines nano-aerogel with special fiber to produce flexible, ultra-low thermal conductivity, high-efficiency thermal insulation felt, suitable for liquid nitrogen, LNG, and other low-temperature industrial pipes, tanks, and equipment cold-proof and heat-insulating. HT200 series aerogel blanket are the best products in cold insulation materials and are ideal for customers to pursue better low-temperature cooling effects and lower energy consumption. HT200. Aerogel insulation blanket with Aluminium foil, similar to Cryogel Z ( mainly used for the cold insulation, such as LNG, Working temperature from -190C-200C ), the thermal conductivity from 0.017-0.023 W/m.k

glasswool board besides heat insulation and thermal insulation, it has other advantages such as excellent damping and sound absorption, especially for intermediate and low frequency and all kinds of noise concussion, noise reduction and working environment improvement. The materials can be cut at random according to the construction requirement. It is mainly used on the following aspects: rooms of buildings, sound reduction system, mean of communication, refrigeration equipments, damping, and sound absorption and noise reduction of domestic electric appliance, which has a satisfactory effect. complete Glasswool insulation board is made by adopting unique centrifugal technology and adding environmental adhesives of thermosetting resins-based into molten glass fibrosis. It is a kind of elastic glass fiber product made of glass fiber with diameter of only a few microns, and we can also choose moisture-proof facing on-line compound according to customers' requirements. Because of a large number of tiny air interspaces, it has the functions of heat insulation, sound absorption, safe guarding and etc, so it is the best materials of heat insulation and sound absorption in construction. Glasswool insulation board production lines range from 5 to 700 tons/day capacity (100,000 to 1,500,000 tons/year), and are fully automated thanks to PLC and Scada systems. Distinctive Advantages of Glasswool Insulation Board: Sound absorption and noise reduction. Easy for construction; cutting at will. Grade A1 fireproof. Low moisture absorption; stable physical properties. Strong vibration resistance and high durability.

Customizes according to demand of project

Products introduction: Dc refrigerated truck body have the following performance features : 4.Good performance of fire proof.According to the america astm research shows the frp+pu structure clod panels with good performance of fire proof. 5. Customised insulated box size, and the thickness of the panels 60-125mm is at your option. 6.Our refrigerated truck body could keep the temperature minimum at -40¡ãc 7. Every truck from our company need to get the rain test. 8. We could export you the refrigerated truck, semi refrigerated truck, refrigerated truck body ckd kits, or the panels, and the spare parts of the refrigerated body needed. Naked

Brown Sand Roll Earthy Yellow PU Sandwich Wall Panel Product description: the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof. Advantage: 1. Heat preservation and heat insulation: the metal carved board has excellent heat preservation and heat insulation performance, can greatly reduce the heating and cooling energy consumption, and save energy expenditure, compared with the traditional exterior wall heat preservation materials, the product cost performance is higher. 2. Fire and flame retardant: the surface of the board is made of a metal layer with special technology, and the inner core is made of hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment. The bottom layer is fireproof and moisture-proof fiber cloth, which makes triple protection more secure. 3. Waterproof and moisture-proof: Metal carved board has an excellent own structure and compact concave-convex bump plug between the board and groove type installation, it can avoid structural damage caused by rain, snow, freezing, melting, etc. It can eliminate the possibility of wall water seepage after installation. 4. Sound insulation and noise reduction: 5. Efficient construction: the installation method of the metal carved board is simple and fast, regardless of being limited by seasonal climate and geographical environment. It can obviously shorten the progress of the project, save the construction cost and reduce the overall cost. At the same time thermal insulation, minimizes the load on the exterior walls and increases the availability of space and land. 6. Environmental protection and durability: the metal carved board has a stable chemical and physical structure, it does not decompose and mildew, and it has no radiation and no pollution to our environment. It also can be flexible disassembly for reinstalled and reused, its scraps can also be recycled and reused, the construction waste will be reduced in the installation process, and easy to clean and durable. 7. Shock resistance and crack prevention: the metal carved board is light in weight, high in strength, and good in impact resistance. the advantages of light weight, not only reduce the burden of the building itself, but also greatly reduce the impact of the earthquake on the building. the board is installed in the lightweight steel structure of the building and has strong integrity, anti-knock and anti-crack, which performs strongly and is high in safety.

Length:customized Width: 1m, 0.96m Height50mm-200mm Standard export package:corrugated paper box to protect four corners of pu sandwich panel

Multicolor steels offer a wide variety of factory made, pre-fabricated insulated sandwich panels for myriad applications. We offer distinct type of panel configurations made on a fully automatic line with metal skin on both sides , ensures consistent cross-section, uniform dimensions and close tolerances.

Rockwool sandwich panel is made of rock wool as raw material. The upper and lower surfaces are made of galvanized color steel plate. According to customer's specific requirements, we can also use aluminum-zinc color plate or galvanized steel plate. The thickness of the steel plate is generally within 0.2-0.8mm, and the core material of the sandwich plate is made of high quality vertical silk rock wool with 120kg/m3 density. So that rock wool sandwich panels with good stiffness. Excellent absorption sound insulation Excellent fire performance: Rockwool core fire rating for the AI level. Buttoning a reasonable way: Rockwool roof panels with dark buckle connection, to avoid the roof joints leakage hazards, saving the amount of accessories. convenient/flexible installation;performance: flat board, seam tight, good stiffness, effectively prevent the generation of hot and cold bridge Sandwich panels are used in facades, partition walls and ceilings. The most typical applications include industrial, office and commercial buildings, sports halls, warehouses and power plants. The panels are also suitable for food industry construction and demanding clean room applications.

As a subsidiary of a Chinese state-run company. it offers the best quality & most competitive price.

Polyurethane screen panel is a kind of reticulated product produced with polyurethane as raw material, as long as it is used in mine mineral processing, classification, dehydration and other screening machines to replace metal sieve plate (net). Polyurethane screen panel is mainly used in coal mine, iron ore, copper ore, and other ore classification, screening, dehydration and other places, is one of the necessary accessories of vibrating screen. According to the screen holes, polyurethane screen panels are divided into slit, rectangular, circular and square screen panels. The friction coefficient between polyurethane and material is low, and because the service life of polyurethane screen panel is 3-5 times longer than that of stainless steel sieve plate, and the number of maintenance and replacement is less, it is the preferred choice in many industries. Polyurethane screen panel is wear-resistant, moisture-resistant, can work under the condition of water medium, has a long service life, and can avoid the adhesion of wet particles, which is more than 5 times that of ordinary rubber screen panel.