Industrial Varnish Coatings Suppliers and Manufacturers

Product Description Deicing Potassium acetate can be used as a deicer to remove ice and prevent its formation. It is a substitute for chloride salts such as calcium chloride or magnesium chloride in deicing applications. It offers the advantage of being less aggressive on soils and much less corrosive, and for this reason is preferred for airport runways. It is, however, more expensive. Fire extinguishing Potassium acetate is the extinguishing agent used in Class K fire extinguishers because of its ability to cool and form a crust over burning oils. Food additive Potassium acetate is used as a food additive as a preservative and acidity regulator. In the European Union, it is labeled by the E number E261;[5] it is also approved for usage in the USA[6] and Australia and New Zealand.[7] Potassium hydrogen diacetate (CAS #4251-29-0 ) with formula KH(OOCCH3)2 is a related food additive with the same E number as potassium acetate. Packing: It is packed with polythene bag as inner layer and polywoven bag as the outer layer. The net weight of each bag is 25kg. Storage and Transport: It should be stored in a dry, clean and ventilative warehouse; and kept away from water and moisture during transport, unloaded with care so as to avoid damage to bags. Be cautious to keep away from moisture and hot.

White crystal powder without any visible foreign matters. Soluble in water, slightly soluted in alcohol, dissolvable in benzene, ether and petroleum ether etc., Esters will be formed by reaction with common organic acid; No reaction take place when it is heated with dilute caustic solution. application Pentaerythritol is used in the manufacture of Alkyd resins, fatty acid rosin and tall oil esters and to make paint and coatings, printing ink, coating adhesives, explosives, sealants, varnish, lacquer, vinyl chloride, synthetic rubber and miscellaneous including Pentaerythritol tetranitrate (PETN), urethane coatings, flame retardant paints, polyvinyl chloride stabilizers, olefins antioxidant and Pentaerythritol triacrylate.

Sebacic acid has a wide range of uses, mainly used to prepare sebacic acid esters, such as dibutyl sebacate, dioctyl sebacate and Diisooctyl sebacate. These esters can be used as plasticizers for plastics, cold resistant rubber, polyamide, polyurethane, alkyd resin, synthetic lubricating oil, lubricating oil additives, spices, coatings, cosmetics, etc. It can also be used as raw material for the production of nylon 1010, nylon 910, nylon 810, nylon 610 and nylon 9, and as raw material for high temperature resistant lubricating oil diethylhexyl ester. It is also the raw material for the production of plasticizer, softener and solvent for alkyd resin (used as surface coating, plasticized nitrocellulose coating and urea resin varnish) and polyurethane rubber, cellulose resin, vinyl resin and synthetic rubber. Hot selling Sebacic acid Decanedioic Acid with new batch CAS 111-20-6

Element % Si O2 8.4 Ti O2 0.2 Fe 52.4 Fe2 O3 74.9 Alc O3 5.62 Fe O 0 Ca O 5.15 Mg O 0.34 Na2 O 0.16 K2 O 0.05 Mn 0.54 S O3 1.3 P2 O5 0.4 L.O.I 3.7

Brightness 95% powder Refractive index 1.59 Oil absorption (ISO787/5) g/100g DOP absorption(ISO 787/5) g/100g PH Value (ISO 787/7) 9.0 Bulk density 1.4g/cm3 Hardness in Mohs 3 Moisture 0.2% Caco3 99.6% Ca O 56.06% Mg O 0.01% Fe2 O3 0.001% Al2 O3 0.001% Si O2 0.01% L.O.l 43.89

Laxogenin is a plant based steroid. It can be found in small quantities of green (plant based) foods. It is derived from a certain plant (smilax sieboldii) and promotes anabolic activity within the body.But no side effects or potential health risks is found yet. More information of Isophorone CAS:78-59-1 1)Used as an intermediate in manufacturing mainly polyurethane field compounds such as isophorone Diamine, isophorone Diisocyanate, Trimethylcyclohexanone used for Light stable weather resistant urethane coating. 2)It is used as a solvent for resin, lacquers,inks & PVC. 3)It is used in formulating Pesticides, Herbicides. 4)It is used in vinyl chloride/acetate-based coating systems for metal cans, other metal paints,nitrocellulose, and printing inks for plastics.

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188°C (370.4°F) Melting Point: -59°C (-74.2°F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco. Packaging Details Mono Propylene Glycol MPG CAS: 57-55-6 Iron drums, 215kg/drum, 17.2 MT/20GP Flexitank: 22-23MT/ flexitank cost little

Oxides % Mg O

XRF LAP % Si O2 99.93 Ti O2 0.01 Al2 O3

It is used in synthetic resin, adhesive, coating, etc., and also used in the production of herbicide, etc. 1. Pesticides: used in the production of pesticides, etc; 2. Coating: synthetic high-grade automotive paint; 3. Resin: synthesize various adhesives; 4. Papermaking: synthetic paper reinforcing agent; 5. Casting: sanding and film remover, synthetic casting adhesive; 6. Aquaculture: fumigation disinfectant; 7. Organic chemical industry; 8. Others: disinfection, sterilizing agent. Purity: 96%min.

1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .

Biological fulvic acid, also known as fulvic acid, is extracted from plants bodies, weathered coal, peat, etc, using special bacteria biological fermentation and chemical treament technology. It is a kind of short carbon chain molecular material extracted from natural plants, with high loading capacity and physiological activity. Fulvic acid contains small molecule aromatic carboxylic acid chemical compounds, its main components containing fulvic acid, amino acid, trace element, etc. It also contains biological active substances and plant endogenous hormone including nucleic acid, salicylic acid, carbohydrates, indole acids, collagen, etc.

Product Description Calcined alumina Industrial alumina powder---Metallurgical grade alumina powder Calcined alumina--- mainly used in ceramics, refractories, glazing etc White fused alumina--- used in refractory,grinding&polishing,abrasives Tabular alumina--- used in refractory Calcined alumina Fetures 1) 99.6% min high purity, raw material origin is Australia 2) SGS, ISO audited manufacturer 3) mass production ability 4) stable chemical features with fine particle size 5) hot-selling in Asia market with favorable price Application for Calcined aluminaï¼? T-pad, thermal conductive silicone grease Fillings for thermal dissipation baseplates, MC baseplates, thermal phase change materials Fillings for semi-conductivity packing grease Fillings for organnic silicon thermal dissipation adhesives and other mixtures Ceramic filter Grinding Materials Catalytic carrier catalyst, and analytical reagents Precise polishing materials, glass products, metal products Semi-conductivity materials, plastic, tapes, burnish belt

Sulfonion Plus is Alkyl Benzene Sulfonic Acid that mainly use as surfactant for detergent, dishwashing and liquid detergent. Sulfonion Plus is work effectively even in acidic and alkaline solution as well as in neutral solution, also in hard water. Chemical Name : Linear Alkyl Benzene Sulfonic Acid (LABSA) Classification : Anionic Surfactant Precaution: Sulfonion Plus is strong acid, handing with care. If contact to skin or clothes, rinse immediately with plenty of water. Packaging & Shipping Available Size: Plastic Drum (200 kgs, 220 kgs) ISO Tank (15,000 kgs, 20,000 kgs) Packaging detail: English/Thai packaging Delivery: Sea freight