Bowen Mangoes are also known as KensingtonPride Mangos and are the most popular mango variety grown in the sub-tropical and tropical regions of Australia. 70% of all trees planted in Australia are Bowen Mangos.
Foundry Pig Iron is suitable for iron castings used in general engineering, machine tools and parts for the automotive industry. Due to the high proportion of iron ore used in the production of Foundry Pig Iron, the formation of pearlite in the finished casting is promoted. This effect is enhanced when more than 10% of Pig Iron per charge is used. The use of Foundry Pig Iron promotes graphite formation, reduces primary chill and improves machinability, particularly important in thin-walled castings The use of costly chill reducing inoculants can be minimised through increased addi- tions of Foundry Pig Iron. The high density and high carbon content of Foundry Pig Iron improves melting rates or reduces energy consumption. In an electric induction furnace savings can be as high as 50 kWh/t of molten metal. In a cupola furnace savings of up to 50 kg coke/t of molten metal can be achieved. The higher bulk density of pig iron relative to scrap means lower storage space re- quirements, less handling during charge make-up, fewer charge buckets and lower charging time. â?¢ The lower surface area : volume ratio relative to scrap means lower oxide (rust) for- mation and thus lower slag volume. The carbon content is chemically combined and thus goes into solution more quickly with lower energy requirement than when adding a recarburiser to scrap
Solar panel aluminum parts, steel parts, aluminum extrusion parts, clamps, mounting parts, hooks, fasteners, epdm tape, aluminum scraps.
Silicon material ic b,p, r > 0,5 ohmcm (99,999999999) ingot, broken ingot, top and tail, scrap, wafer. for solar production metallurgical production.
The analyzers from Master series are high quality devices for measurement of nine milk parameters. Precise analysis of the components can be done for 60sec./40sec./30sec. Master LM2 can be equipped with second peristaltic pump for automatic cleaning. Master LM2 is comfortable and reliable milk analyzer with sophisticated sensor with long life and better precision. Options by customer request conductivity, inbuilt printer, USB flash memory stick, second peristaltic pump for automatic cleaning, ph. Three calibration channels are available. Standard calibrations for milk analyzer Master LM2 are for Cow milk, Sheep milk, UHT. The analyzer can be calibrated also for: Buffalo milk, Pasteurized milk, Goat milk, Mixed milk, Skimmed milk, Whey and other types of milk and milk derivatives.
Lactomat Rapid SBP is compact ultrasonic milk fat testing machine. Fast and high technology testing in 18 sec. only. Microprocessor from new generation and improved software. The milk analyzer is equipped with double measuring cell, balloon pump and inbuilt ventilation system for prevention of overheating in hot environments. SMPS based power supply, separated serial ports for printer and PC. Stainless steel housing.Three calibration channels are available. Standard calibrations for milk analyzer Lactomat Rapid SBP are for Cow milk, Sheep milk, UHT. The analyzer can be calibrated also for: Buffalo milk, Pasteurized milk, Goat milk, Mixed milk, Skimmed milk, Whey and other types of milk and milk derivatives.
Hvac products, boilers, natural gas, coal stokers, grain cleaning equipment, electrical generators ng, or diesel, recycling division like scrap tires, clean wood waste, crumb rubber plant.
Spent catalyst, jewellery machine, rare metal recovery, electrolysis unit, pgm recovery, tantalum refining, e scrap, catalytic converter, induction furnaces, assay laboratory.
Water proofing membranes, asphalt, bitumen tar, hdpe granules, ldpe granules, ldpe granules, wool scrap, industrial machinery like excavators, cranes & electric generators.Transportation & shipping
We are a used Tires and used Tires Scrap wholesaler in Germany. We are capable of producing 40000 tons of used car Tyre per year. We are ready to supply these Tyre in Bales which is to be shipped in one 40 FT HC container that can hold about 26 to 27 Tons. origin German Our experience as exporter of used tires in Germany goes back to 2012. All our secondhand car tires are well examined by sight and are in perfect condition. All tires are directly examined according to our high-quality standard at our suppliers in Germany. All part worn tires we sell are well inspected. We pick up old tires, arrange and mark all tires accordingly to the qualities we offer and sell only those tires and casings which are good for further use. Our quality standard is described in our price list. All used tires and casings are graded according to the needs of the buyers in the different tire markets worldwide. Our warehouse is located near Frankfurt am Main/Germany Please visit us in our warehouse after you have sent us a tire export inquiry AND we both agreed to start a profitable mutual business together. That means: We would like to invite costumers for secondhand tires to visit our warehouse in Germany which are able to buy one of the tire mixtures/compositions/ contingents we offer. We are very sorry, though, at present, it is impossible for us to invite everybody. Payment / Shipment Terms -30% in advance rest at Arrival Port Used Car tire 4mm to 8mm mixture from 10 Dollar to 16 Dollar Per Piece car used tires scrap Selling price $ 40/Ton all prices are Ex-works Warehouse Germany
We are looking for real buyers familiar with the purpose of extra-pure metals. We, as manufacturers of high-purity metals, announce that we can supply the following products: 1. High purity copper ingots (grades C5N, C6N) Quality: 99.999% Cu of oxygen-free copper. Quantity: up to 50,000 kg monthly. Price: 385 euro/kg. Quality: 99.9999% or more for the requirements of special thermal and electrical conductivity, cryogenic, acoustic and other properties, at a negotiated price. C6N ingots up to 500 kg per month. Price: 3850 euro/kg. 2. Ultrafine copper powder (PMU) of isotopic composition Chemical purity - 99.999%, average particle size 3 - 12 microns on request. Quantity: up to 25 tons monthly. Price: 385 EUR/kg. Chemical purity - 99.9999%, average particle size 3 - 12 microns on request. Quantity: up to 5 tons monthly. Price: 3850 EUR/kg. 3. Ultrafine zinc powder (isotope Zn-66), is not radioactive Chemical purity: 99.995% - 99.999%, average particle size 3 - 5 microns, Quantity: up to 1000 kg monthly. Price: 2200-11 000 EUR/kg (depending on terms of sale). 4. Nickel wire grade DKRNT-0,025-KT-NP (diam. 0.025 mm) Quality: NP2 (99,8 -99,9% Ni), NP1 (99,93 -99,98% Ni), NP0 (99,99 -99,995% Ni) Quantity: up to 500 kg monthly. Price: NP2 (99,8 -99,9% Ni). Price: from 0,25-0,85 EUR/meter. NP1 (99,93 -99,98% Ni). Price: from 0,35-0,95 EUR/meter. NP0 (99,99 -99,995% Ni). Price: from 0,45-1,05 EUR/meter. 5. High quality aluminum brand A99, A4N6 in bars Quality: not less than 99.996 - 99,998 % Al. Quantity: from 20-60 tons monthly. Price: 35 EUR/kg. 6. High purity aluminum ingots (grades A5N, A5N5, A6N) Quality: not less than 99.999% Al. Quantity: up to 1000 kg monthly. Price: 385 EUR/kg. 7. High purity cadmium ingots (grades KD-0000 brand; Cd6N) Quality: not less than 99.999% Cd. Quantity: up to 2000 kg monthly.� Price: 385 EUR/kg. 8. Europium metal ingots EvM-1 (99.9 - 99.98% Eu) Quantity: up to 150 kg. Price: 7700 EUR/kg. 9. Gold Wire. Quality: � ( 99,99 -99,995% ) Quantity: up to 500 kg monthly. Price: on request We produce tungsten wire in assortment under the buyers order. Prices are on FCA sale condition, factory manufacturer. IASC certificates and other product documents are available on the basis of official requests, LOI + CIS + BCL. We produce all metals from our price list for each customer according to their full requirements and characteristic
Direct supplier of Refined Sugar ICUMSA 45. Our price: Refined Sugar ICUMSA 45. Price annual contract: Volume: 12500tons 380$/ton Volume: 25000tons 370$/ton Volume: 50,000 tons 360$/ton Volume: 100000tons 350$/ton Payment: 100% SBLC Refined Sugar ICUMSA 45. Price annual contract: Volume: 12500tons 390$/ton Volume: 25000tons 380$/ton Volume: 50,000 tons 370$/ton Volume: 100000tons 360$/ton Payment: 100% Irrevocable, Confirmed, Transferable, Operative DLC
We are looking for real buyers familiar with the purpose of extra-pure metals. We, as manufacturers of high-purity metals, announce that we can supply the following products: Nickel wire grade DKRNT-0,025-KT-NP (diam. 0.025 mm) Quality: NP2 (99,8 -99,9% Ni), NP1 (99,93 -99,98% Ni), NP0 (99,99 -99,995% Ni) Quantity: up to 500 kg monthly. Price: NP2 (99,8 -99,9% Ni). Price: from 0,20-0,75 EUR/meter. NP1 (99,93 -99,98% Ni). Price: from 0,25-0,85 EUR/meter. NP0 (99,99 -99,995% Ni). Price: from 0,30-0,95 EUR/meter. Minimum order 5000000 metres.
Sell from the manufacturer of wheat flour highest grade (type 550). The volume of supply up to 2000 tons per month. Packaging in bags of 50 kg.
Our company produces new euro-pallets EPAL 800mm x 1200mm. Europallets are made in accordance with UIC 435-2. All EUR pallets are treated (phytosanitary control). Price The possibility of supplying 10000pcs per month.
Our company produces wood pellets 6 mm in diameter, packaged in bags of 15 kg. Characteristics: total humidity 6,1% ash content 0,7% total sulfur 0,014% exit of flying speeches 84,4% density - 1,12g/sm3 calories 4400(min)-5050(max) Kcal/kg The bags can be marked with a logo (+5 Euros) Possible volume of supply - 1000 tons per month. Price 350 Euros per ton on the terms of Price 460 Euros per ton on the terms of
We produce and sell fuel pellets (pellets) from sunflower husks. Diameter: 6 and 8 mm. Ash content: up to 3,5% Humidity: up to 10% Higher calorific value: 4970 kcal/kg Lower heating value: 4140 kcal/kg Bulk density: 450-490 kg/m3 Packaging: 15 kg bags and 1000 kg big-bags. Terms of delivery FCA Svetlovodsk FCA Svetlovodsk price $255/ton; FCA Riga price $240/ton; Volume 1000 tons per month.
Sell from the manufacturer of sunflower oil refined and unrefined, tare in 1 and 5 liters, as well as in bulk flexitank. Price of refined sunflower oil on the condition of - 1L - $1.49/bottle. - 5L - $ 6.75/bottle. Price of unrefined sunflower oil on condition : - 1l - $1.46/bottle. - 5l - $6.60/bottle. Pouring into flexitanks on request. Delivery volume 1000 tons per month. The composition comprises linoleic sunflower oil and linoleic unsaturated fatty acids are not synthesized in the body. These acids are called vitamin F or essential acids. The need for them to humans even higher than in other vitamins. Unsaturated fatty acids are involved as an essential component in the formation of cell membranes and sheaths of nerve fibers.Sunflower oil contains B vitamins A, D and E.
We produce and sell ultra-dispersed copper powder PMU. Delivery volume up to 25000kg per month. Price with delivery in the free customs zone Payment SBLC. Chemical purity of PMU, in accordance with and IGAS certificates, is not less than 99,999 %, Cu 65-30.91 0.05 %, Cu63-69.09 0.05 %. Powder is stabilized in inert gas Argon. Shape of the particles is spherical. Package: PET jar of 2 kg. A box contains 15 pcs. Net weight - 30 kg. SPECIFICATION COPPER POWDER PMU Product name: COPPER POWDER ULTRAFINE Purity not less than: 99,999% - 99,9997% The isotopic composition is that of natural cooper: Cu63 (69,09+/- 0,05%), Cu65 (30,91+/- 0,05%) Powder structure: Is not laminated Melting point: 1084 C Packing: PET jar of 2 kg. A plastik box contains 15 pcs. Net weight - 30 kg
Product Type: Food Style: Fresh, Fresh Shelf Life: 3 YEARS Place of Origin: Pakistan Variety: Long-Grain Rice Kind: Basmati Rice Crop Year: 2018 Texture: Hard Cultivation Type: Common Color: White