IFE Public Transport Escalator An escalator is a type of conveyor that moves people horizontally or vertically between levels of a building or other structure. The public transport escalator is often used in public transportation systems such as airports, train stations, and shopping malls to help people easily access different levels of the building. IFE Public Transport Escalator List GRACES-700 GRACES-700 heavy-haul public transport escalator provides the safest, most comfortable and stable conveying equipment for crowded places such as subways, railway stations and airports. Public Transport Escalator Structure Why Choose IFE Public Transport Escalator? GRACES-700 heavy-duty public transport escalator adopts leading technology at home and abroad. And the drive host adopts a two-stage deceleration structure, which is highly efficient and energy-saving. The full frequency conversion control system is adopted to meet the needs of passenger flow at different times. The safety factor of the drive system reaches more than 8 to meet the safety of the equipment. The Important Role Of Transport Escalator Plays In Public In the dense flow of people and other public transportation places safety is particularly important. GRACES-700 escalator static load safety factor can reach more than 8 times, enough to cope with various harsh situation needs, the drive host adopts a two-stage reduction device, the transmission efficiency can reach 95%, effectively reducing power loss. All metal parts are made of corrosion-resistant materials, and the service life of the whole machine can reach more than 40 years, avoiding frequent replacement of parts during use, reducing the utilization rate of equipment, thereby improving the conveying rate of passengers.
Save time and labor. Direct seeding of rice is direct sowing, just like wheat, eliminating the process of raising seedlings, and transplanting, and there is no need to occupy rice fields for raising seedlings. Direct seeding of rice does not have the process of regreening and seedling injury, so the growth period is shorter than that of transplanted rice in the same period. Direct seeding of rice is simple and convenient, which is conducive to large-scale development. The Yongxiang SeedHub with Intelligent tablet APP, central control system and radar sensor ensures precise distribution even in windy conditions. Using the electrically controlled metering shaft, the seed enters the air channel where it is conveyed by the blower fan to the ends through plastic hoses. Using radar speed measurement and centrol control system to accurately control the sowing amount, the sowing accuracy is as high as 98%. Description: 1. Direct rice seeding machine with 8/12 Rows optional 2. Smart Tablet APP control precise seeding volume 3. Easy to attach on most brand riding transplanter (Yanmar, Kubota, Iseki .etc) 4. Rice seed roller with seeding rate from 7.5-600kg/ha 5. 12V transplanter battery power supply 6. Stepless motor, tablet control box, radar sensor combined working for high precise seeding rate control 7. Only set the seeds rate in control tablet APP and seeder works 8. Seed Level, Seed rate and catlibration, working width on control APP tab 9. Anti-blocking, leakage, empty box alarm device 10. Remain seeds discharge operation on control tab 11. Water ditcher and seeds line maker, conducive to the field water in/drainage
Description for S&S Cycle T124 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three Piece Flywheel assemblies with main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 cam Stock 96 Twin Cam bolt patter Forged dished piston 4-1/8 bore 4-5/8 stroke 10.2:1 compression ratio Requires oil line installation kit 434-336 for 1999-2006 FLT models, 434-335 for 1999-05 Dyna models 58MM throttle body highly recommended Carbureted engines will require a performance ignition module that allows adjustments to the advance curves S&S engines are shipped without oil 2 Year Warranty
Description for S&S Cycle T111 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three piece flywheel assemblies with the main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 camshafts Stock 96 Twin Cam bolt patter Forged piston 9.8:1 compression ratio 4-1/8 bore 4-1/8 stroke Requires oil line installation kit 725-169 S&S engines are shipped without oil 2 Year Warranty
Attapulgite suspension agent is a thixotropic anti-sinking thickener, which is made of natural rare minerals processed by high-tech special technology, and its main composition is crystalline magnesium aluminum silicate hydrate. It has good anti-sinking and thickening effect in both water-based and solvent-based systems. Specification Powder Colour Grayish white Viscous ,CPS 2000, no precipitation. Mesh Number 200 Moisture,% �¢?�¤12 PH 8-10 Proportion 2.35 Packing Density, g/cm3 : �¢?�¤0.50 Application areas: High-grade putty, paint, ink, liquid fertilizer, pesticide, lubricating oil, fine chemical, printing and dyeing paste, etc. 1. Good thickening. The paint film is plump and the can opening effect is good. 2. Good suspensibility. Prevent paints and paints from precipitation and delamination 3. Good shakiness. It is easy to brush, thinning under the action of shear force and thickening after rest. 4. Good thixotropy. Direct addition, good compatibility, no need to change the process and formula 5. Good leveling. Anti-shrinkage hole and fisheye, not easy to hang 6. Good weather resistance. It has strong acid and alkali resistance, corrosion resistance and mildew resistance. 7. Good thermal insulation. High temperature resistance, thermal insulation, insulation 8. Good environmental protection. Chemical inertia, no pollution, inhibit the growth of microorganisms, absorb toxic volatile components, green environmental protection. As the suspension agent and carrier of pesticides, attapulgite is widely used in pesticides, fungicides, herbicides and so on because of its high oil absorption rate and moderate pH. It can prolong the efficacy, prolong the shelf life and reduce the production cost of pesticides.
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Xiongcai XC303 electronic speed controller (ESC) is engineered for medical bone drill speed control, also it is suitable for Stryker bone drill. The Xiongcai XC303 electronic speed control (ESC, motor controller) is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER. With power system of 30A, 7.2v-16.8v, this product will promote performance of your vehicle. Integrating an Al case, it can be inserted into handle of bone drill, what you need to do is ensuring the following items complying with our specification: a) this product can be inserted into handle and fixed with our any loose; b) The magnets fixed on the trigger align with Hall Sensors; c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic fiel and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill). A Brazil client contacted us and inquired about electronic speed comtroller several months ago. He said he wanted to buy controller for Skryker#6,#7,#8. He saw a lot of damaged Stryker bone brill being abandoned because no contollers for maintenance. He doubted and said we bought some electronic speed controller from other suppliers, but some of them could not be installed properly and some of them could not run at their best. I showed him the specification and told him to pay attention to the items I mentioned above. After checking the details, he understood why the products he bought before didn't work well, because the range of magnets was not precise, the magnetic field was unsteady. I told him samples are charged, but expense could be refunded when he placed order for massive production. He bought 10 samples for test. One month later, he came back to me and said the test was successful, Stryker bone drill worked very well as orginial. Last week, he ordered a batch of electronic speed controller for his maintenance business. We designed a series of protection measures to make sure that the products can run steadily and safe. Protection measures includes under voltage, over voltage, over current, short circuit protection, etc. Furthermore, this product is certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You donâ??t need to worry about the reliability. Xiongcai electronic speed controllers have been applied to many top brands such as NISSAN, XPeng, Jingyi Group, ACHR, FAW Group, FAWDE, Shenhai Electrical Appliances, Kesen, Cummins and more. If you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try, or google Shenzhen Xiongcai Technology, we are ready to put your device at its best.
Efficiency · Innovation · Intelligence Likegro has 30 years of experience in the manufacture of slow closing toilet lid and bathroom fixtures. Our professional service teams are located in three core cities in China, including Shanghai, Ningbo and Baoding. During to the sufficient bath hardware wholesale experience and production strength, we have long-term in-depth cooperation with international first-line brands such as Kohler, Bemis, Villeroy&Boch, Centoco, etc., and have unique professional capabilities in product development, design, production, and sales. Cooperating with us, we will jointly explore the most dynamic and stable irreplaceable service plan. Likegro Bathroom Hardware & Slow Close Toilet Seat Transform Function Into Beauty SAFETY We only use environmentally friendly or high-quality raw materials. Pollution and emission issues are strictly controlled during the production process. Our bathroom fitting company minimize the impact of production on the environment and protect human health. INTELLIGENCE The production line from raw material grinding to finished product assembly is all completed by intelligent automation equipment The R&D team always keeps up with the new technology trends in the market LONG LIFE SPAN î?? Each soft toilet seats for sale and bath fixtures wholesale has passed the life testing test, such as 22 hours CASS test, more than 50,000 opening and closing tests, etc. Why Choose Likegro Slow Close Toilet Seat & Bathroom Hardware for Sale? Possess an engineering technology R&D team with independent innovation capabilities to efficiently develop and test new products. Long experience in mold manufacturing, zinc hardware/aluminum hardware alloy die-casting, CNC machining, electroplating process, slow-down device manufacturing, precision injection molding, and fully automated production capabilities. Strategic partnerships with world high-end customers such as Bemis, Kohler, Centoco, Kalamata, Villeroy & Boch etc. Products occupy over 30% of the European market, over 20% in Canada, and over 50% in the United States. With sales and service teams in Shanghai and the United States, international and professional services are readily available. While pursuing high efficiency and quality, production does not forget energy conservation and environmental protection, and always adheres to a people-oriented sustainable development path. Adhere to the service concept of quality first and customer first, continue to develop and innovate, and strive to become the first international brand of Chinese sanitary ware brands.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30+55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30+55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30??+55?? Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4Vï½?5.2V (rechargeable battery) Working temperature -30ï½?+55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30+55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30+55 Track gauge division value 0.01mm Track gauge max indication error �±0.25mm Superelevation division value 0.05mm Superelevation error �±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30+55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30??ï½?+55?? Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
Digital Rolling Track Gauge For Track Geometry Measurement The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy. The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace. It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying . Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. PRODUCT SPECIFICATIONS Model (1435mm) GJC-JJG0 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range -200~+200 Flangeway Clearance 20-107 Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V5.2V (rechargeable battery) Working temperature -30+55 Track gauge division value 0.01mm Track gauge max indication error ±0.25mm Superelevation division value 0.05mm Superelevation error ±0.3mm Weight 6.5kg Application rail line railway speed less than 350km/h Customize 1000 1067 1435 1520 1600 1676 track gauge are available
