Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
Applications 1.Skin Tightening 2.Wrinkle Removal 3.Eyes' area treatments 4.lncrease skin elasticity 5.Fat and cellulite reduction 6.Face wrinkle removal & lifting 7.Warm vacuum cellulite massage 8.Body slimming, contouring & shaping 9.Promote cell metabolism, improveblood circulation Working Principle 940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue; The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect; The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment
Diode laser hair removal machine OEM logo Medical CE vertical 808nm diode ndyag laser hair removal epilator 808nm diode laser Model: QM-808+ Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. Specialty of QM-808+: ** New Medical and Elegant design ** Handpiece Specifications Technical Specifications: Laser Type Diode Laser Laser Stacks Power 1000-1600W Wavelength (Spectrum) 808nm/755nm+808nm+1064nm Energy Density (Fluence) 166J/cm2 (Continuously adjustable) Spot Size 15x15mm2 Dual chiller 25*25mm Pulse Repetition Rate 1-10Hz Pulse Duration 10-400ms Pulses Single Cooling +Continuous Sapphire contact cooling(-5�ºC~1�ºC) +Air cooling +Closed water circulation cooling Stand-by Working Continuously for 20 hours Display 10" True Color LCD Touch Screen Electrical Requirements 110/230VAC, 15/20A max., 50/60Hz Net Weight 55kgs Dimensions (WxDxH) 450*550*1000 mm
Diode laser hair removal machine OEM logo Medical CE vertical 808nm diode ndyag laser hair removal epilator 808nm diode laser Model: QM-808+ Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. Specialty of QM-808+: ** New Medical and Elegant design ** Handpiece Specifications Technical Specifications: Laser Type Diode Laser Laser Stacks Power 1000-1600W Wavelength (Spectrum) 808nm/755nm+808nm+1064nm Energy Density (Fluence) 166J/cm2 (Continuously adjustable) Spot Size 15x15mm2 Dual chiller 25*25mm Pulse Repetition Rate 1-10Hz Pulse Duration 10-400ms Pulses Single Cooling +Continuous Sapphire contact cooling(-5�ºC~1�ºC) +Air cooling +Closed water circulation cooling Stand-by Working Continuously for 20 hours Display 10" True Color LCD Touch Screen Electrical Requirements 110/230VAC, 15/20A max., 50/60Hz Net Weight 55kgs Dimensions (WxDxH) 450*550*1000 mm
Diode laser hair removal machine OEM logo Medical CE vertical 808nm diode ndyag laser hair removal epilator 808nm diode laser Model: QM-808+ Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. Specialty of QM-808+: ** New Medical and Elegant design ** Handpiece Specifications Technical Specifications: Laser Type Diode Laser Laser Stacks Power 1000-1600W Wavelength (Spectrum) 808nm/755nm+808nm+1064nm Energy Density (Fluence) 166J/cm2 (Continuously adjustable) Spot Size 15x15mm2 Dual chiller 25*25mm Pulse Repetition Rate 1-10Hz Pulse Duration 10-400ms Pulses Single Cooling +Continuous Sapphire contact cooling(-5�ºC~1�ºC) +Air cooling +Closed water circulation cooling Stand-by Working Continuously for 20 hours Display 10" True Color LCD Touch Screen Electrical Requirements 110/230VAC, 15/20A max., 50/60Hz Net Weight 55kgs Dimensions (WxDxH) 450*550*1000 mm
Contract Axminster Broadloom Carpet Furnish Carpet that comply with the following requirements: 1. Traffic Classification: Heavy traffic. 2. Fiber Content: 80% wool, 20% nylon of soil-resistant treatment. 3. Construction: Machine Woven. 4. Face Construction: Cut pile 5. Pitch: 27.55/dm -175mm 6. Rows: 27.55/dm/-175mm. 7. Pile Height/Wire: above backing 6.5mm. 8. Surface Pile Weight: 877 g/sq. m, minimum. 9. Total Pile Weight: 1683 g/sq. m, minimum. 10. Colors and Patterns: As indicated in Schedules or provided by the designer . 11. Width: 3.66m , 4.00m or customised B. Backing: As follows 1. Primary Backing: 112 g/m (3.3oz/yd2) woven polypropylene 2. Secondary Backing: 237 g/m2 (7oz/yd2) woven jute 3. Laminate: 948 g/m2 (28oz/yd2) synthetic latex C. Performance Characteristics: As follows: 1. Critical Radiant Flux Classification: Not less than 0.22 W/sq. cm. 2. Dry Breaking Strength: Not less than 445 N per ASTM D 2646. 3. Resistance to Insects: Comply with AATCC-24. 4. Noise Reduction Coefficient (NRC): 0.6 per ASTM C 423. 5. Colorfastness to Crocking: Not less than 4, wet and dry, per AATCC-165. 6. Colorfastness to Light: Not less than 4 after 40 AFU (AATCC fading units) per AATCC-16. 7. Antimicrobial Activity: Not less than 2 mm halo of inhibition for gram-positive bacteria; not less than 1 mm halo of inhibition for gram-negative bacteria; no fungal growth; per AATCC-174. Note: The technical parameter sheet flexibly based on the needs of different customers. The new technical specifications are modified without prior notice due to processing changes, technological progress and other conditions.
Double sided scrim tape is made of high strength glass fiber yarn for strengthening the back material, coated with strong adhesion pressure sensitive adhesive on both sides; The double-sided scrim tape has high tension strength, strong viscosity, high wear resistance and moisture resistance. There is a thin layer of high temperature resistant glass fiber mesh cloth in the middle of the adhesive layer (glass fiber in a very wide range of temperature to maintain dimensional stability very little deformation) can provide vertical and horizontal two-way stable size without deformation. Adhesive materials range is very wide, including rubber, PP/PE, PBT/PET, ABS, PMMA, general plastics, metals, inorganic glass and so on. The adhesive can be maintained in a wide temperature range (temperature range depends on the nature of the adhesive material and the weight of the load). Features of Double Sided Scrim Tape Use high duty fiber glass(PES/PVS) mesh cloth as backing Both sides coated with aggressive pressure sensitive adhesive Protected by gold glassine paper release liner Backing material has very good tensile strength Extremely high adhesion strength Can be removed with no glue residue & no de-lamination Excellent resistance to abrasion, moisture, high temperature Can easily conform to many irregular surfaces Double Sided Scrim Tape vs Paper Tape Double Sided Scrim Tape (or Double Sided Fiberglass Tape) Composition: Double-sided scrim tape typically consists of a strong fiberglass mesh (also known as scrim) embedded between two layers of adhesive. This construction provides excellent strength and durability. Double-coated scrim tape is commonly used in construction and building projects for applications such as mounting, bonding, and sealing. The fiberglass mesh provides reinforcement, making it suitable for heavy-duty applications where strength and stability are crucial. Key Features of the Double-sided Scrim Glass Tape: Strong adhesion on both sides. High tensile strength due to the fiberglass mesh. Resistant to tearing and stretching. Suitable for indoor and outdoor use. Paper Tape Composition: Paper tape is typically made of paper or a paper-like material with an adhesive coating on one side. It lacks the reinforcement provided by fiberglass mesh. Paper tape is commonly used in painting and drywall applications for tasks such as masking, taping joints, and covering gaps. It is designed to be easily torn by hand and is often used in situations where flexibility and conformability are more important than sheer strength. Key Features: Easy to tear by hand. Flexible and conformable to irregular surfaces. Suitable for indoor applications where strength requirements are moderate. As a professional adhesive tape factory, Egret has high-quality aluminum foil tape for sale. Welcome to contact us if needed.
Frozen and fresh veal, beef and young bull cuts, forequarters and hindquarters, tenderloin, prime rib, brisket, flank, shin & shank, knuckle, topside, silverside, rumpsteak, head meat trimming, eyeround, chuck & blade, chuck tender, ribeye steak, heel, ossobuco, by products like tripe, testicles, tail, feet, omasum, lungs, aorta, tongue, diaphragm, liver, tendons, mask, snout, rumpsteak, filet mignon, ribeye steak, top sirloin steak, stripling steak, fresh and frozen lamb, mutton and goat meat, whole carcasses, six way cuts, boneless or bone in shoulder, chops, rack, shank, neck, loin chop, rump, by products like tripe, intestine, fat, kidney, liver, heart, testicles, tongue, trimmings, head trimming.
Description: The PCD Boring Tools are made by PCD Blanks (E6) Brazing on The Tungsten Carbide Body. Most common is full face PCD Notching Tools. PCD Boring Tools are used for Machining Various Of Tungsten Carbide Rollers. PCD Tips for Carbide Roller Notching. Details Specification Applications of PCD Boring & Notching Tools: PCD Boring Tools Are Used For Machining Various Of Tungsten Carbide Rollers. PCD Tips For Carbide Roller Notching. PCD boring tools Application range Roll Air Conditioning Compressor Parts Slewing support Gear shaft Bearing Cylinder liner Hub unit bearing Brake drum Brake disc. Why Choose Our PCD Boring Tools 1. The raw material is excellent, and it is processed and sharpened by the element six PCD composite sheet. 2. Fine cutting edge, the hardness of diamond is about 8000HV, and the hardness is 10 times that of alloy. It has the advantages of low friction coefficient, high hardness and long service life. It can process a higher finish than conventional tools while reducing costs. 3. High-precision dimensions, tolerances of blade angle, blade tip, length, and equal division are strictly controlled within the tolerance of 0.02MM to ensure the stability of the life of each blade. 4. Complete specifications, various specifications and models can be produced, customized production according to the customer's use size, the manufacturer's supply makes you more assured. Advantages of PCD Boring & Notching Tools: High Abrasive Resistance And Thermal Conductivity Good Surface Finish Long Service Life. The Service Life Is 20-30 Times More Than Carbide Boring Tools. High processing efficiency and high universality. Suitable for dry and wet cutting. PCD inserts are mostly used in high, medium and low silicon content aluminum alloys, graphite, metal matrix composites, carbon fiber composites, titanium alloys, aluminum alloy ultra-finishing industries, aviation and auto parts, etc. In traditional machining applications, it not only greatly reduces the overall production cost, but also significantly improves the productivity and efficiency of the entire production operation, while greatly reducing equipment investment. Pack: Cartons and bubble wrap Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided FOB Port: Shanghai Qingdao Guangzhou
Processing Part: Aluminum alloy wheel hubs for car, Aluminum Alloy Outer Circle, Head Face Processing Way: Turning, Semi-Fishing, Fishing Characters: PCD Turing Tools Have Long Service Life, High Efficiency And Work Pieces Have Higher Brightness Etc. During the wheel hub machining process, uses the PCD wheel hub tool for repairing and refurbishing the aluminum alloy wheel hub rim. Applications of PCD wheel hub turning tools: The PCD wheel hub tools are used for turning and finishing aluminum alloy wheel hub rims for cars. Advantage of PCD tools for wheel hub cutting: The tool bits of the PCD wheel hub turning tools use PCD & PCBN blanks by E6. The cutter arbor uses high-quality tungsten carbide and tool steel Advanced Welding Technology To Ensure PCD turning tools No Turning, No Welding Off, No Carbonization, Long Life Welded Integral Hub Tools with Good Tool Rigidity, Good Shock Resistance, Stable Performance, And Large Feed It Is An Aluminum Car Wheel, Motorcycle Aluminum Wheel Hub, Electric Vehicle Aluminum Wheel Hub The Most Commonly Used Diamond Blade For Fine Turning. PCD wheel hub turning tools Classification: 1. Welded Integral Hub Tools.(Can Be Designed To Meet Sp ecific Customer Requirements.) The PCD blade and the tool holder are welded together, which has good thermal conductivity, stability and impact resistance. The size can be customized according to customer needs, which saves the debugging time for the matching of the blade base and the tool holder. In turn, the rapid response of the processing site is achieved. Mainly used for rough machining of wheel hubs. Common Specifications Include 25*25 And 20*20 Two Kinds Of Body Specifications, Divided Into Forehand And Backhand. ·The Dimensions Of The Cutter Head R Are Generally R4, R3, R2.5, And R2. ·The Protruding Part Of The Welding Head Of The Blade Body Is Welded With a Hard Alloy To Reinforce The Strength. ·The Extension Length Is Determined By The Processing Of The Hub Size And The Depth Of The Rim. Advantages: Good Tool Rigidity, High Welding Strength, Good Shock Resistance, Stable Performance, And Large Feed.
Models: RNMN solid CBN, RCMX soilid CBN, PCD notching tools, PCD engraving tools Applications of PCD inserts, solid cbn : high speed steel (HSS) roll, Ni-Cr alloy cast iron roll, chilled cast iron roll, threaded steel roll, cast iron rolls, cast steel rolls, tungsten carbide ring, forged steel cold Rolls Specification: 1ã??PCD and PCBN Tools for Rolls Machining Moresuperhard solid CBN inserts and PCD tools for machining high hardness rolls, cast iron roll, high-speed steel (HSS) roll, Ni-Cr alloy cast iron roll, chilled cast iron roll, threaded steel roll, cast iron rolls, cast steel rolls, tungsten carbide ring, forged steel cold Rolls. Due to its excellent properties, carbide rolls are widely used in the steel industry and their hardness is very high. For the machining of cemented carbide rolls, CBN/PCD Inserts can effectively replace the grinding process to improve production efficiency. The roll is the main workpiece and tool that makes the metal continuously plastically deform on the rolling mill. The roll is mainly composed of three parts: roll body, roll neck and roll head. The roll is the intermediate part of the roll that actually participates in rolling the metal. Has smooth cylindrical or grooved surfaces. Rollers are almost universally used in nearly every manufacturing process in the world. The roller is the main part of the rolling machine, with the pressure which come from the rolling roller to roll the steel. 2ã??The specifications size of PCD tools, solid CBN inserts for machining roll - Solid CBN inserts for Rolls Machining As a PCBN inserts manufacturer and exporter in China, More Superhard's PCBN inserts have excellent performance in processing gray cast iron,nodular cast iron,hardened steel and material, sintered metal,and processing work piece surface is highly polished and very durable. Solid CBN iinserts rough machining high Ni-Cr alloy cast iron rolls, semi finishing chilled cast iron rolls, finish turning forged steel cold rolls, turning tungsten carbide rings and hss rolls, etc - PCD Notching Tools, PCD Boring Cutter for Roller The PCD notching tools, pcd boring cutters are made by PCD blanks (E6) brazing on the tungsten carbide body. Most common is full face pcd notching tools. PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching.
Jeju Island-produced pine nut oil extracted from pristine areas of South Korea, consisting of 77% pure pine nut oil and 100% synergistic essential oil. Experience the refreshing essence of the pine forest, meticulously extracted using pristine Jeju Island spring water through steam distillation. This process ensures purity by removing impurities and aging the oil, resulting in a clean and fragrant pine nut oil. Phytoncides are natural antimicrobial substances emitted by cypress trees as a defense mechanism against pests and microorganisms. With their powerful antimicrobial properties, phytoncides can soothe itching in conditions like atopic dermatitis, allergies, and sensitive skin. Additionally, they aid in the natural healing of fatigued skin. Here are some key characteristics of phytoncides: 1. Forest Bathing Effect: Spending time in forests rich in phytoncides can reduce stress and enhance mental well-being. 2. Neutralizing Harmful Substances: Phytoncides help neutralize harmful substances in the air. 3. Preventing New House Syndrome: They mitigate symptoms associated with moving into a new house or newly remodeled space. 4. Antibacterial and Deodorizing Action: Phytoncides effectively combat mold and ammonia odors. 5. Stress Reduction: Inhaling phytoncide-rich air can lower cortisol levels and promote relaxation. Choosing products or environments with high phytoncide content can contribute to overall health and happiness. Synergy Blending Recipe: 77% Jeju Island-produced pine nut oil Lavender oil Rosemary leaf oil Wild geranium oil Feel free to use the organic essential oil on both your face and body with confidence. Here are some usage precautions: 1. When storing essential oil, its recommended to remove any remaining oil from the dropper before sealing the container. If left inside the dropper (made of rubber) or the glass bottle for an extended period, the oil can cause the rubber to become sticky, deteriorate, or spoil. Heres how to use it: 1. Aromatherapy: Place 2-3 drops on the corner of your pillow or bedding. The abundant phytoncide content in pine nut oil helps relieve stress and promotes restful sleep. 2. Bath Oil: Add 2-4 drops to your bathwater. The forest-like aroma of pine nut oil enhances relaxation during half-body baths, while its moisturizing properties keep your skin hydrated. 3. Skin Care: Mix 1-2 drops with your regular lotion or base oil. Apply it all over your body for moisturizing and soothing effects. 4. Scalp Care: Add 1-2 drops to your shampoo. Massaging your scalp with this mixture contributes to scalp health through its antimicrobial properties." Remember to adjust the amount when using 100% essential oil. Enjoy the benefits of pine nut oil! Expiration date : 36 months after manufacturing. Made in Korea
Venus Legacy Body Shape slimming device fat removal Radio frequency Skin Tightening Machine. Model: iShape III+ 2024 upgraded best equipo cellulite SPRT v10 sculptor body slim shape machine weight loss for sale 1.Skin Tightening 2. Wrinkle Removal 3. Eyes' area treatments 4. lncrease skin elasticity 5. Fat and cellulite reduction 6. Face wrinkle removal & lifting 7. Warm vacuum cellulite massage 8. Body slimming, contouring & shaping 9. Promote cell metabolism, improveblood circulation 940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue; The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect; The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment. Technology 1: Cavitation 40KHz Cavitation technology in itself means that the ultrasound causes the fat cells to vibrate so fast (high frequency) so vacuum bubbles are formed in the cell. As a consequence, the outer casing of the fat cells (the membrane) is "blown out" and the fat ends outside the cells. Outside of the membrane, the fat can be broken down to rapidly accessible energy, which is then taken up in the blood or transported by lymph nodes, after which they are either burned or stored in other fat cells elsewhere in the body. Technology 2: Mechanical roller massage The mechanical roller massage works profoundly on densified connective tissues. The mechanical massage rollers enhance the skin's cell-generating activity, resulting in thickened fat deposits being drained. Technology 3: Vacuum massage The vacuum massages lift, mold and massage the skin deep and on the surface. The massage also increases the blood circulation, which in turn leads to the release of fat from the fat cells. The massage further provides a tightening of the skin. Technology 4: Bipolar RF(radio frequency) Bipolar RF makes water molecules in the fat revolve with high speed to produce friction and shock, then triglyceride go out from fat. RF energy with 1-10M could get to 4-15mm skin depth, which makes every layer get heat evenly. The new collagen makes skin turn tighten. This Bipolar RF makes the reorganizing fat cells connect more closely, stimulate the collagen re-grow, avoiding flabby skin after slimming treatment. Technology 5: 980nm infrared light
