TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
OD 21.3~508mm Thickness 2mm~40mm Length 5.8m/ 6m/ 11.8m/ 12m or any fixed length as per customer request Technique Hot rolled or cold drawn Standard API5L/ API5CT/ASTM A53/A106/A179/ A500/A501, JIS G3441/G3444/G3454, DIN 10210/10219, DIN 17175 etc Steel Grade 20#, Q345, A106/53B, A179, S275, S355,GR.B/X42/X46/X56, ST44/37/ A500, J55-P110 Technique Hot rolled or Cold drawn Section Shape Round SurfaceTreatment Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating. TPI SGS, BV, MOODY, CCIC can be arranged before shipment. Packing Steel Strips bundled/In Bulk, Plastic Caps connected, waterproof plastic End Plain Ends ,Beveled End, Threaded with couplings Application Mainly used for high-temperature liquids transmission (water, heavy steam as well as various other high-temperature liquids), machinery, steel constructions, electricity industry, power plants etc We look forward to establishing a long-lasting cooperative relationship with you! Contact name:Jenna Yan Tel:8603175501333 E-mail:Sales2@brsteel.org Skype:Steel-Jenna Whatsapp:+8613292790570 Linkedin:https://www.linkedin.com/in/jenna-yan-steel-pipe-trading-10843b16a/ Wechat:brsteelsales2
Product Details Product Name: Rail Flat Trolley Colorï¼?Yellow/Red/Bule/Customized Capacity: 1-500 Ton as your choose Warranty: 1 Year Certificates: CE ISO SGS Power supply: Storage Battery Application: Industry Fields,Factory,Workshop,Warehouse Advantages The kind of rail flat trolley is with high level automation; Excellent gear reducer and motor with high quality, assemblied together perfectly; Safe devices are installed in the rail flat trolley; The turning can be realized for this kinds of rail flat trolley, as "s", arc-shaped", "curved rail"; Customization can be supported for the rail flat trolley; The kind of rail flat trolley is with large capacity and high quality; The kind of rail flat trolley can be applied in various occasions as high temperature, easy explosion, ponding, dust, scrap iron... The hydraulic lifting device can be equipped as per customers' demand; The V frame can be installed for rounded material as per your need; DC motor controlled, the speed can be adjusted; Safety, flexibility, stable start, big starting torque, small capacity to the gear reducer; Long service lifetime for this kinds of rail flat trolley; The running distance of this kinds rail flat trolley is not limited; This kinds of rail flat trolley is battery operated, so only charged fully, can it run freely without limited distance.
Product Introduction The electric motorized flat carriage is a rail type transportation carriage that lays a track on the ground, and the laid rail is generally an I-shaped surface contact rail. The characteristics of the performance of the electric motorized flat carriage is that it has a large bearing capacity, is not afraid of dirty and squeaky, easy to maintain, and has a long service life. The electric motorized flat carriage can be equipped with industrial wireless remote control devices to achieve artificial remote control. The electric motorized flat carriage has a simple structure, easy using and operation. It is commonly used in construction materials, stone materials, metal processing, tunnel engineering, iron and steel metallurgy, hydropower industry, aerospace war industry, ship terminals, automobile machinery and other fields. Features This series electric motorized flat carriage is suitable to be applied in the bed environment, for example, high-temperature and anti-explosion condition. Compared with KPX (battery power) series flat carriage, the using time of the electric motorized flat carriage is unlimited. Compared with KPD (conductor rail power) series flat carriage, the electric motorized flat carriage has no strict requirement for the construction of the rails. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production carts;
Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
Introduction Half Gallon Transparent Plastic Bucket with Lid is made of new PP material,Website:http://www.yidingpackaging.com, which is used for storage and transportation of various liquids. It has good characteristics for special dangerous goods packaging. It has the characteristics of non-fragile, non-rusting and light weight. Quick Details Material:Plastic, Plastic Usage:Paint Type:Bucket, Type Place of Origin:Jiangsu, China (Mainland) Brand Name:YIDING Model Number:Sturdy Plastic Bucket Product Name:Half Gallon Transparent Plastic Bucket with Lid Brand:YIDING Place of origin:China SizeRange:Half Gallon Shape:roundness Handle:smooth Printing:You can customize Use:Paint Parameter Packaging & Delivery Packaging Details 1.polybag for each product, and suitable quantity for a carton 2.kindly notice: we could pack according to your reques Port Shanghai port  FAQ Q:How could I place an order? A:Please provide your requirements(size,shape,design,printing,finish,etc)as clear as possible,so we could send you quation at first time. Q:How could I get a sample? A:We will provide you the available sample free within 2 work-days, as long as you undertake the freight cost or send us your courier account number for sample sending use. Q:What about the lead time for mass production� A:Honestly, it depends on the order quantity and the season you place the order.Always 15-30 working days. Q:What is your terms of delivery? A:We accept EXW,FOB,etc.You can choose the one which is the most convenient or cost effective for you.
Product Features01 ComfortabilityIt's like stepping on the real earth after shower/bath and it gives powerful feeling of comfortability.02 AbsorptionIt absorbs water fast from the wet feet when stepping on it,with the development of absorption traces clearly visible.03 Comparison to textile bathmatsNo need to frequently wash the bath mat. Just lean it on the wall after some usage and it will restore the absorption capability by itself.04 Safety to the BodyNo more worries about the damages to the body by the textiles or the synthetic chemicals.05 QualityVery high quality. No more need to import from Japan.06 Bathroom safetyNo more slippery or watery floor in the bathroom. Reduce dramatically the risk of slipping for seniors and children.07 Relive housewives' burdenMuch less daily labors of mopping the wet floor after show/ bath of the family member. Product specificationColor: White/blue/greySize : 300*300*9mmN.W. : 0.8kgG.W.: 1.1kgCertifications: SGS/VOC Packing & DeliveryPacking : Bubble bag +inner craft box +color boxCarton packing size : About 32.5*39*32.5cm/ 12 pieces, 14kg/ carton(300*300*9mm) About Us -A professional diatomite and homeware products manufacturer-More than 7000 m2 workshop located in Wenzhou-New Hangzhou office of 40 members is established in July,2018.- Strict ISO9001 factory system, 5S management for 100% quality controlled- Own R&D team of creative design capability and new products updating.- Exporting to Japan and Korea for 3 years with good reputation of quality and reorder FAQQ: What is the monthly output of your factory?A: Our factory has 15 production lines with monthly output of 500,000 pieces diatomite bath mats.Q: Can your company provide free samples?A: Please consult our sales for confirmation of your requirements and samples will be prepared and sent to you, shipping cost is on your side .Q: Is it possible to customize your product?A: Surely, we have experienced of OEM for long times, and free design service provided, color, pattern, package, shape, as you like.Q: What is your payment term?A: Paypal, TT or L/C at sight.
Introduction Half Gallon Transparent Plastic Bucket with Lid is made of new PP which is used for storage and transportation of various liquids. It has good characteristics for special dangerous goods packaging. It has the characteristics of non-fragile, non-rusting and light weight. Quick Details Material:Plastic, Plastic Usage:Paint Type:Bucket, Type Place of Origin:Jiangsu, China (Mainland) Brand Name:YIDING Model Number:Sturdy Plastic Bucket Product Name:Half Gallon Transparent Plastic Bucket with Lid Brand:YIDING Place of origin:China SizeRange:Half Gallon Shape:roundness Handle:smooth Printing:You can customize Use:Paint Parameter Packaging & Delivery Packaging Details 1.polybag for each product, and suitable quantity for a carton 2.kindly notice: we could pack according to your reques Port Shanghai port  FAQ Q:How could I place an order? A:Please provide your requirements(size,shape,design,printing,finish,etc)as clear as possible,so we could send you quation at first time. Q:How could I get a sample? A:We will provide you the available sample free within 2 work-days, as long as you undertake the freight cost or send us your courier account number for sample sending use. Q:What about the lead time for mass production� A:Honestly, it depends on the order quantity and the season you place the order.Always 15-30 working days. Q:What is your terms of delivery? A:We accept EXW,FOB,etc.You can choose the one which is the most convenient or cost effective for you.
Product Features01 ComfortabilityIt's like stepping on the real earth after shower/bath and it gives powerful feeling of comfortability.02 AbsorptionIt absorbs water fast from the wet feet when stepping on it, with the development of absorption traces clearly visible.03 Comparison to textile bathmatsNo need to frequently wash the bath mat. Just lean it on the wall after some usage and it will restore the absorption capability by itself.04 Safety to the BodyNo more worries about the damages to the body by the textiles or the synthetic chemicals.05 QualityVery high quality. No more need to import from Japan.06 Bathroom safetyNo more slippery or watery floor in the bathroom. Reduce dramatically the risk of slipping for seniors and children.07 Relive housewives' burdenMuch less daily labors of mopping the wet floor after show/ bath of the family member. Product specificationColor: White/blue/greySize : 300*300*9mmN.W. : 0.8kgG.W.: 1.1kgCertifications: SGS/VOC Packing & DeliveryPacking : Bubble bag +inner craft box +color boxCarton packing size : About 32.5*39*32.5cm/ 12 pieces, 14kg/ carton(300*300*9mm) About Us -A professional diatomite and homeware products manufacturer-More than 7000 m2 workshop located in Wenzhou-New Hangzhou office of 40 members is established in July,2018.- Strict ISO9001 factory system, 5S management for 100% quality controlled- Own R&D team of creative design capability and new products updating.- Exporting to Japan and Korea for 3 years with good reputation of quality and reorder FAQQ: What is the monthly output of your factory?A: Our factory has 15 production lines with monthly output of 500,000 pieces diatomite bath mats.Q: Can your company provide free samples?A: Please consult our sales for confirmation of your requirements and samples will be prepared and sent to you, shipping cost is on your side .Q: Is it possible to customize your product?A: Surely, we have experienced of OEM for long times, and free design service provided, color, pattern, package, shape, as you like.Q: What is your payment term?A: Paypal, TT or L/C at sight.
1. Product description Precision planetary gearboxes from SR are compact and light,comparing with shaft-fixed driving cylindrical gear reducers with hard tooth surface,the weight is 1/2-1/3 lower,and volume is 1/2-1/3 less.It is of high driving efficiency,bearing capacity and driving power.The outline shapes are varied,and they will run steadily and at low noise.It employs high-quality Alloy steel that is hardened and nitrided,so it is of better performance. 2. Technical parameter -Rotation of input-shaft:<1500r/min -Transmission Rate:single-stage 4ï½?18,double-stage 20ï½?125,three-stage 112ï½?1250  3. Features (1)Color:Chinese Red or as clients' requirement (2)Material:Nodular Cast Iron or as clients' requirement (3)Weight:180kg-2000kgã??53kg-1733kgã??85kg-57000kg (4)Deceleration reduces the inertia of the load at the same time, and the reduction of inertia is the square of the reduction ratio. (5)The backhaul clearance is small, the accuracy is high, the service life is very long, the rated output torque can be done very much. 4. Terms of Payment 30% by T/T in advance.  5. Packaging & Delivery Packing details:We usually use the fumigation wooden case packing,also can be customized according to customer service request.  Loading Port: Shanghai or Ningbo Shipping details:Ocean shipping and air freight. Delivery time: Within 25-35 working days after we have received the full payment. 6. Our service (1)The Warranty period is 12 months. (2)Have many years of production experience. (3)We have the independent right to export, price better, can control the quality and delivery time. (4)The photos and films of production process will be reported to you. (5)Good after-sales service.
The Advantages Of PCBN Cutting Tools, CBN Inserts Long Tool Life. CBN cutting tools have properties which resist chipping and cracking and provide uniform hardness and abrasion resistance in all directions. They may outperform conventional cutting tools by as much as 50 times. Reduced tool wear results in closer tolerances on work pieces, and fewer tool adjustments keep machine down-time to a minimum. The increased reliability of CBN cutting tools makes them a major factor in automating machining operations. Cutting Hard, Tough Materials. CBN cutting tools are so hard that they can efficiently machine steel with hardness of Rc 45 and above. CBN is also used for machining cobalt-base and nickel-base high-temperature alloys with hardness of Rc 35 and above. Many of these materials are so hard and tough that they must be machined at relatively low speeds. Conventional grinding is also used but is a relatively slow metal-removal process. CBN cutting tools have a high resistance to impact and therefore can machine parts with interrupted cuts and tough abrasive scale. High Quality Products. Because the cutting edges of CBN cutting tools wear very slowly, they produce high-quality parts faster and at lower cost per piece than do conventional cutting tools. The need for the inspection of parts is greatly reduced as is the adjustment of the machine tool to compensate for cutting-tool wear maintenance. This results in better control over work piece shape and size, which produces consistent part quality far beyond that possible with other cutting tools. Uniform Surface Finish. Surface finishes of less than 10 micron. are possible, which often eliminate the need for relatively slow finishing operations such as conventional grinding.
APPLICATIONS&TEST PURPOSE This tester simulates the normal conditions of usage to determine the sofaâ??s endurance under a long-term repeatability loading. The principle is to simulate normal functional use to determine the strength of the three-sofa structure by applying to seating and backrest with loads.Using a certain shape and load modules, with specific form, frequency, respectively, repeating load seating, backrest and armrest. Three tests can work together or independently, also the test position is adjustable. GENERL SPECIFICATIONS Machine Dimensions: (W x D x H) 2500*1700*1850mm Power supply source: single-phase, AC220V±10%, 50/60Hz (can be appointed) Gross Weight: 950kg DESIGN STANDARD: EN 4875 1a Seat static load test1b Back static load test 4a Seat fatigue test4b Back fatigue test STANDARD FEATURES: Function Three Seating and backrest test modules, one armrest test modules Timer 0ï½?999,999, can set the test cyclic freely Cyclic and Holding Time 0ï½?99.9S Air Source 7kg/ cm2 ï¼?provided by customerï¼? Max Specimen Size (LÃ?WÃ?H)2200Ã?1200Ã?1200mm 1) Seat fatigue load: 950 N; Backrest fatigue load: 400N 2) LCD color Touch screen, easy to operate 3) PLC programmable controller
Top Power Bank : Quickly and smartly charges a smartphone and a tablet at the same time via Smart USB ports with the total 2A output . Phone Bank Charger : 12000mAh high capacity provide safer and more adequate power for charging a variety of smartphones, laptops, household electric appliances . Each home power bank has been designed to the highest safety and quality standards, ensuring reliability and performance . Built-in safeguards protect your devices against excessive current, overheating, and overcharging . 12,000 mAh color : White , gray 1, simple shape, ultra-thin design, feel comfortable 2, A + polymer battery, 600 + cycle charging 3, 2.4A input, 2.4A dual port output, fast charging inside and outside 4, V1 fire retardant material 5, overcharge, over discharge, over current, over voltage, short circuit, excessive power, low voltage and other eight protection. 6, dual USB output, can charge two mobile phones at the same time How long will it take to charge the Phone Power Bank itself? The time of charging Power Bank is very based on its input current and capacity. Simply speaking, a 2200mAh power bank may take only 2â??3 hours to charge, whereas a 6600mAh top power bank may take 3â??5 hours to charge. Home power bank can be charged using a Wall Charger or a computer. The wall charger will charge the power bank at a faster rate than the computer. Computers have a smaller charging output. Computer Wall Outlet 6600mAh 4400mAh 2200mAh Looking for ideal Top Power Bank Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Phone Bank Charger are quality guaranteed. We are China Origin Factory of Home Power Bank. If you have any question, please feel free to contact us. More information click : https://www.baisiweicable.com
product description: Stainless steel wire mesh is the future of the enclosure material, manufactured from high-grade stainless steel cables of material class AISI304,AISI304L,AISI316 / AISI316L ,including knotted mesh and ferrule mesh, Mesh can be applied in either a vertical or horizontal direction,The mesh is hand woven from stainless steel wire, Commonly used Mesh sizes range from 20mm x 20mm to 300mm x 300mm with stainless cable diameters from 1.0mm to 4.0mm,Allowing architects and designers to choose from a variety of load the corresponding specifications,But, because the weave opening, we can infinitely customizable ,to meet your exact specifications, No matter how large, how small. Brand Name: SF Type: ferrule or hand woven Wire diameter: 1.0-4.0 mm Hole size: 20 x 20 - 300 x 300 mm Angle: 60 degrees - 90 degrees Hole shape: Diamond or Square Technique: Hand woven Material: Stainless steel wire 304,304L,316,316L Product Name: Stainless steel cable net for bridge Product Features Stainless steel Cable mesh have Corrosion resistance, very good tensile strength, high yield Strength: the choice of stainless steel is a guarantee of quality with regard to bridge construction. Its properties enable compliance with the most Demanding technical requirements: long span, lightweight ting of structures, Seismic performance. It can be used by bare, even in very harsh environments Such as coastal or industrial zones. Applications: Stainless steel Bridge protection cable mesh is usually used on both sides of the bridge,to Avoid persons and cars falling into the water.
Nutritional rice production line is based on food nutritional demand and advanced technology.It has the advtantages of high automatic and saving energy.This production line can adopt rice,millet,black rice,buckwheat ect.As main materials.Then it can be treated with vitamins,protein and mineral substance.After the processing of extruding,cooking and shaping,the materials can be made to reinforced rice,golden rice,buckwheat rice,solaum tuberdsm rice ect.The cooking method is same as natural rice.Even more,it is easier and more conveninent. Packing and shipping 1. Daub coal oil on the surface of the machines. 2. Plastic film as the inner packing. 3.Train, ship or depend on clients' requirement Our services 1). Free consultation service before, during, and after sales. 2). Free project planning and design services upon clients' special demands. 3). Debugging and inspecting of equipment until everything is functional before leaving the factory. 4). Overseas installation and training of equipment maintenance and operating personally. Company Information: Shandong Joyang Machinery Co., Ltd.is a professional supplier of food processing machines. We are located in Jinan, the capital of Shandong Province. Our company is full of staff with many years of experience in supplying the food process machines. Contact Me If you have any questions about don't hesitate to contact with us. Your inquiry will be highly appreciated and we will give you the best price and service in order to make a long business relationship with you in the future!
Fish feed machine is suitable to make dry and wet type fish food pellet (catfish, aquarium, Tilapia, Freshwater fish and tropical fish etc.) 1). All fish food equipments are made of stainless steel. 2). The fish food whole line fully continuous and automatic. 3).Joyang provide basic fish food formula according to your require. 4). The final fish food shapes and sizes can be various by changing the mould. 5). Supply different size mould free of charge. 6). Packing machine could be supplied to work with the fish feed production line (depending on your require) Packing and shipping 1. Daub coal oil on the surface of the machines. 2. Plastic film as the inner packing. 3.Train, ship or depend on clients' requirement Our services 1. Free consultation service before, during, and after sales. 2. Free project planning and design services upon clients' special demands. 3. Debugging and inspecting of equipment until everything is functional before leaving the factory. 4. Overseas installation and training of equipment maintenance and operating personally. Company Information: Shandong Joyang Machinery Co., Ltd.is a professional supplier of food processing machines. We are located in Jinan, the capital of Shandong Province. Our company is full of staff with many years of experience in supplying the food process machines. Contact Me If you have any questions about don't hesitate to contact with us. Your inquiry will be highly appreciated and we will give you the best price and service in order to make a long business relationship with you in the future!
Name: PCD Cutting Tool Blanks Brief IntroductionMore SuperHard PCD Cutting Tool Blanks In The Size Of 5μm�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. Type: Triangle, Cylindrical, Square, Flake, Etc Details More SuperHard PCD Cutting Tool Blanks In The Size Of 5μm�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. They Are Applicable To The Processing Of Non-Metal Materials As Wood, Ceramics,Intensified Planks And Non-Farrous Material As Copper And Aluminum. We Can Supply All Kinds Of PCD Cutting Tool Blanks That Diameter Can Reach 58mm . Model Product No Ang Diameter (Mm) Thickness (Mm) MoreD30 360 30 1.6, 2.0, 3.2 MoreD42 360 42 1.6, 2.0, 3.2 MoreD48 360 48 1.6, 2.0, 3.2 MoreD51 360 51 1.6, 2.0, 3.2 MoreD58 360 58 1.6, 2.0, 3.2 Note:The Products Can Be Manufactured Per Customer Request As Non-Standard Shapes Such As Rectangular, Square, Triangle, Rhombus, Sector And So On. Advantages: 1. High hardness, abrasion resistance and impact resistance 2. High speed, good surface finish, long life and high efficiency 3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl 4. Gauge pads have tungsten carbide inserts for maximum wear resistance 5. The diamond layer with thickness over 1 mm increases abrasion resistance of PDC cutter Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult and choose at any time
Description Introduction of Expanded Metal Mesh Expanded metal mesh is an intermediate raw material that allows light and air to flow freely through it and that has more rigidity than the sheet from which it was produced. It is formed in an expanded metal mesh press and produced from any malleable metal sheet product. The plate, sheet, or coil is simultaneously slit and stretched into diamond-shaped openings. These openings are of uniform size and regularity. Expanded Metal Mesh Material Suitable for Expanding Carbon Steel, Alum inum, Stainless Steel, Galvanized, Copper, Brass, Titanium, Platinum, Zinc, Nickel, Silver, Gold Surface Finisheshot-dip, galvanizing, pre-galvanizing, anodizing, enameling, power coating, painting, plastic coating, etc ApplicationsCeilings and r oofs, Decorative dividers, Guards, Air and fluid filters, Fencing, Battery cells, Strainers, Partitions, Outdoor furniture, Speaker grills, Security walls, ceilings, floors, doors, Machine and window guards, Shelving and racks, Containers, Greenhouse benches Styles of Expanded Metal Mesh Regular (standard or raised) all expanded metal mesh is produced in regular form off the expanders. The strands and bonds are set at a uniform angle to the plane of the sheet. This gives added strength and rigidity, as well as a skid resistant surface. Flattened is manufactured by processing regular expanded metal mesh in a rolling mill. The rolling process reduces the thickness of the original base metal. Design Designations Strands The sides of the expanded metal meshdesign v Strand Thickness Thickness of the base material from which the sheet was produced. Strand Width Amount of metal fed under dies to produce one strand v Strand Thickness and Width Can be varied to create different openings. The width of the strand should equal or exceed the thickness of the base metal. SWD Nominal dimension, Short Way of Diamond v LWD Nominal dimension, Long Way of Diamond v Design Size Actual dimension SWD and LWD. Measured from a point to a corresponding point on the adjacent diamond. Packaging & Delivery Delivery Lead Time : 15 daysMinimum Order : 100 meters
Johnson strainer Grade: SUS201,SUS304,SUS316, Duplex2205, 2507, 3507, SUS906Stainless steel tube Size: 1.050" to 4"1/2 Stainless steel casing size: 4"1/2 to 20"The thickness for the tube:2.87mm to 16mmThe thickness for the casing:5.21mm to 20.24mm Standard: API 5CT, ASTM A312, API 5L Certification: ISO9001, SGS, CTI, ROHS, BV,DIN, GB, JIS, BA, ANSIThe threads type: STCLength:up to 6m (or according to clients' requests)Application:water/oil filter, oil wells, water wells, gas well, the chemical factories using Technique:Polishing&Wire wrapped&Welding Characteristics of Johnson strainerThe characteristics of the wire and rods:The welded stainless steel water well screen is made up of rods and wires. The rods can be round, triangular and trapezoid wire. The wire is triangular wire we also called v-shaped wire. The characteristics of the slot:the structure of the water well screen with high open area, as well as accurate dimension. Other characteristics of the water well screens: heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Use area of Johnson strainerThe strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters.Johnson screeScreen Size(in)Inside Diameter (in)Outside Diameter(in)OD of Female Threads End (in)2225/823/43335/833/44445/843/45555/853/46665/878885/891/41010103/4113/81212123/4133/814131/814??161516??2018 3/420??
Quick information Brand name: shuangyiplace of origin: chinamodel number : china yb/t4001-2007size : 1m*6m Description Hot-dip galvanized steel grating has strong impact resistance, strong corrosion resistance and heavy load capacity, elegant and beautiful, and has excellent performance in municipal subgrade and steel platform construction projects. The high cost performance is the construction project of the hot galvanized steel lattice plate widely used in the pavement of the old and new subgrade. It has long service life is, it is generally within the range of 40 years -50 years. The hot-dip galvanized steel plate is a very good steel frame structure and bearing platform without the participation of the destructive factors. Steel grating size: 1m*6m standard type (special size and american standard size are also customizable) Material: low carbon steel (q235)=a36 Surface treatment: hot dip galvanizing, paint or no coating Surface shape: plain, serrated and i type Steel grating standard: chin a y b/t4001-2007 America ansi/naam Australia as1657-1992 Steel standard: china gb700-88 / astm (a36) / bs4306 (43a) Hot dip galvanizing standard: china gb/t13912-92 / astm (a123) / bs729 Technological process (1) material (2) pressure welding (3) cutting (4) welding of ends bar (5) hot dipped galvani-zation (6) final shipment -
