White Marble Rectangle Coffee Table. A striking two-tone colour palette, geometric frame and sleek silhouette give this coffee table its sense of industrial chic, while the marble-esque finish adds an extra touch of style. The inviting surface is ideal for holding magazines, houseplants or perhaps a post-work cocktail. Assembly is required. Perfect for morning coffee or an evening chat with friends, this table offers an easy-to-clean surface to set down snacks, drinks, the remote, and more. The top of this coffee table is made of manufactured wood with a metal frame in a black finish which provides strong support. Features Assembly you'll love: Thanks to the manageable number of individual parts and the easy-to-understand instructions, this living room table is easy to assemble The table top is made to give you the modern and natural white marble atmosphere in your home with marble pattern coating on wood.
*Unit E DIN 51605 *Density(15°C) Kg/m3 900-930 *Flash Point P.-M. °C Min. 220 *Cinematic Viscosity(40°C) mm2/s max.36,0 *Lower cloric value Kj/kg min 36.000 *Cetane Number min.39 *Carbon Residue Mass n.C. % (m/m) max.0,40 *Iodine Number g Jod/100g 95-125 *Sulphur Content mg/kg max.10 *Contamination mg/kg max.24 *Erucic Acid Value mg KOH/g max.2,0 *Oxidation Stability 110°C h min.6,0 *Phosphorus Content mg/kg max.3 Content of alkaline earth Metals *(Ca+Mg) mg/kg max.20 *Oxid Ash Content % (m/m) max.0,01 *Water Content K.-F. mg/kg max.750
PFA purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2 Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear markings for easy observation, and the pointed spout makes it easy to pour the solution. 2. Product features: 1. Transparent, with raised scales, chemical resistance and heat resistance, resistant to various chemical solvents such as acids and alkalis, HF and organic solvents; suitable for preserving chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in compliance with DIN EN 285. The flanged design facilitates clamping and movement, dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquids; the use of high-purity raw materials makes it easy to clean, and can be used with our company's electric heating plates and digesters 3. High thermal stability, good transparency and smooth surface; 4. It is often used as a reaction vessel for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a container for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200~+260; no memory effect; 7. Anti-pollution: low metal elements have low blank values; 8. It is suitable for laboratories such as trace and ultra-trace analysis and isotope analysis. It is a clean experimental analysis vessel; 9. Comply with the requirements of laboratories or testing institutions, as well as medical testing, trace testing, etc. for experimental equipment, for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); 3. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
Advantages: Excellent Corrosion Resistance: It is coated with Teflon, a high-quality anticorrosive material, making it resistant to strong acids and alkalis. This ensures long-term stable operation of the equipment. Fast Heating Speed: The anti-corrosive cast aluminum hotplate has a rapid heating speed, which can quickly increase the temperature of the digestion solution and shorten the sample processing time. No Cross-Contamination: It allows for the simultaneous processing of multiple samples without causing cross-contamination. Reduced Metal Components: The DBF-type electric hotplate's supports are made entirely of polytetrafluoroethylene (PTFE), significantly reducing the entry of metal parts into the laboratory. Customizable Features: It offers customizable time-setting functions, segmented temperature control, and can be processed with different board surfaces according to requirements. Intuitive Display and Safety Functions: The liquid crystal display (LCD) offers features such as buzzer alarms and automatic power-off for added safety. Easy Operation and Maintenance: The anticorrosive electric hotplate has a simple structure, making it easy to operate and maintain. Energy Efficiency and Environmental Friendliness: Compared to traditional heating methods, it has higher energy utilization efficiency, reducing energy consumption and environmental pollution. In summary, the anticorrosive electric hotplate from Nanjing Binzhenghong Instrument Co., Ltd. offers superior performance in terms of corrosion resistance, heating speed, safety, and energy efficiency, making it an excellent choice for various laboratory applications.
1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200ï½?+260â?? 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
PFA acid purifier 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
1. Premium Soursop Concentrate (Available Jan 2024) - No sugar added. - Gluten Free. - 100% Natural. - Enriched with Probiotics. Packaging - Glass Jars (280 grs, 471 grs, 750 grs) also can be packed as per clientâ??s requirements (Plastic bags, Metal drums or plastic buckets) - 24 units per Carton Box (Glass jars) - 47000 units (280 grs) per 40ft HQ container - EXW â?? FOB or CIF - Product Availability: 2 HQ containers per Week (from Jan 2024 to March 2024) 2. Premium Soursop Jam. (Available Jan 2024) and bakery premium fruit fillings (fillings for cake). - No sugar added. - Gluten Free. - 100% Natural. - Enriched with Probiotics. Packaging - Glass Jars (280 grs, 471 grs, 750 grs) also can be packed as per clientâ??s requirements (Plastic bags or plastic buckets) - 24 units per Carton Box (280 grs) - 47000 units (280 grs) per 40ft HQ container - EXW â?? FOB or CIF - Product Availability: 2 HQ containers per Week (from Jan 2024 to March 2024) 3. Premium Soursop Puree or Pulp. (Available Jan 2024) - No sugar added. - Gluten Free. - 100% Natural. - Metal Drums (180kg - 200kgs) also can be packed as per client's requirements (Plastic bags or plastic buckets) - 84 units per pallet - 16400 kgs per 40ft HQ container - EXW FOB or CIF - Product Availability: 2 HQ containers per Week (from Jan 2024 to March 2024)
The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. Product Description The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi ~ 20,000 psi 3. Nominal diameter: 2.1/16 "~ 4.1/16" (52mm ~ 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46C ~ 121C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 ~ 4 8. Performance level: PR1 ~ 2
Ball screw gate valves are designed for large caliber, high-pressure manual valves. The valve combines the tail balance lever and the unique ball principle to make its operation light, low torque, and easy to operate. Its diameters range from 3 1/16 "to 9" and its pressures range from 10,000 psi to 20,000 psi. Product features: 1. Two-way downstream sealing structure, which improves the service life; 2. Fixed metal seal (between gate and seat and seat and body); 3. Simple and reliable gate and seat design can reduce field service; 4. Sealing ring between seat and body helps seal at low pressure. They also prevent granular contaminants from entering the body chamber and sealing area; 5. Stem seal design covers all pressure classes, temperature ranges, and all fluid conditions encountered in wellhead and manifold environments; 6. Metal seal between bonnet and valve body, up to 20000psi working pressure; 7. Reverse stem seal structure allows the valve to replace stem seal under pressure drive; 8. To ensure safety, a grease injection device can be placed on the stem after the inverted seal. The device can be placed on the bonnet to eliminate body leakage; 9.Ball screws can effectively improve the switching efficiency and reduce the switching torque, which is more conducive to opening and closing the valve easily and quickly. For more information, please visit our website.
English name lycerol tristearate Molecular formula C57H110O6 Molecular weight 891.49 Type - Non-ionic CAS No - 555-43-1 Quality Index Appearance: Colorless crystal or powder Acid value (mgKOH/g): 5 Saponification value (mgKOH/g): 191-202 Freezing point (): 56-60 Physical and chemical properties : Odorless and sweet. Soluble in hot alcohol, chloroform, benzene, insoluble in water-cooled alcohol. The melting point is about 55C. Function and use This product has the functions of emulsifying, lubricating, hardening, etc. It is used as emulsifier, lubricant, ointment base, etc. in pharmaceuticals. Commonly used in the manufacture of creams, ointments, suppositories, lotions, etc. This product is also a food additive, used in the manufacture of emulsified food, cakes, etc. It is also widely used in the daily chemical industry for the manufacture of creams, soaps, shampoos, waterproof papers, adhesives and other daily chemical products. For metal polishing, also for adhesives, dentures, polishes and waterproof paper production. It is used as an auxiliary agent for sizing and leather fatliquoring in the textile industry.
FFA (%) NEN-EN-ISO 660 max 0.1 Moisture (%) NEN-EN-ISO 662 max 0.05 Impurities (%) NEN-EN-ISO 663 negative Color Lovibond (5 1/4 inch) NEN 6308 15Y 1.5 R Peroxide Value at loading (meq/kg) NEN-EN-ISO 3960 max 1.0 Relative density at 20 C NEN 6311 0.91 93 Iodine value (g 12/100g) NEN-EN-ISO 3961 110-126 The product is not allowed to contain the following pesticides: Toxaphene Max 0.10 mg/kh Total DDT Max 0.05 mg/kg Other pesticides (individual) Max 0.01mg/kg PCBâ??s Max 0.01mg/kg Presence of the following metals is tested: Cadmium max 0.02 mg/kg Mercury max 0.05mg/kg Copper max 0.05mg/kg Arsenic max 0.10mg/kg Lead max 0.10mg/kg Nickel max 0.20mg/kg Iron max 0.10 mg/kg Microbiological characteristics, The following analyses are done periodical: Total viable counts Salmonella neg./25g Lypolytic m.o. Yeast Mould Enterobacteriaceae max 10./g E- Coli
Particulate Filtration Efficiency: 95% CA-N95F-175 This highly breathable flat fold earl loop disposable respirator mask also has ASTM Level 3 surgical mask rating. has authorized it as a 95PFE Surgical Respirator Adult Standard Size 5 Layer (KN95 Style) Face Mask Respirators are in for superior comfort and protection. This added value of assembly is not only visible in the high-quality construction of these masks; you will be confident knowing you are protecting yourself and others with genuine lab-tested products and a rigorous manufacturing process. FEATURES: Hypoallergenic, no Latex and no Graphene Manufactured in Clean Room Disposable Superior protection around the face and mouth with a fitted design that blocks airborne pathogens Anti-fog Earl loops Convenient and comfortable for daily wear White Colour Bi-fold Design Individually wrapped for extra protection 20 masks per box Ideal use: Medical and casual use, indoors and outdoors. 5-layer construction 5-layer:2 non-woven outer layers, 2 melt-blown inner filter, 1 non-woven cotton middle layer. Earl loop design with metal nose bridge. Fits most adults and teenagers12+
Sugar Icumsa : Origin: Brazil Product: Sugar Icumsa 45 Specifications Polarity At 20,c: 99.80, Minimum Sulphated Ash Content: 0.04% Maximum By Weight Moisture: 0.04% Maximum By Weight Magnetic Particles: Mg/kg 4 Solubility: 100% Dry & Free Flowing Granulometry: Fine Standard Icumsa: Colour 45 Icumsa Attenuation Index Units (method #10-1978) Maximum As: 1 P.P.M. Colour: Brilliant White Reducing Sugar: 0.010% Maximum In Dry Mass Radiation: Normal W/o Presence Of Cesium Or Iodine So2: Mg/kg 20 Heavy Metals, Toxic Elements Maximum Mg / Kg Basis Arsenic 0.50 Cadmium 0.05 Copper 1.00 Lead 1.00 Mercury 0.01 Zinc 3.00 Pesticide Traces Maximum Mg / Kg Basis Ddt 0.005 Photoxin 0.01 Hexachloran Gamma Isomer 0.005 Microbiological Limits Pathogenic Bacteria Including Salmonella Per 25 Gram: Nil. Bacillus Per Gram: Nil
Gum Arabic, E414, Hashab, Talha (Natural & Dry Powder) SOLUBILITY Soluble up to 55% concentration. Gum Arabic is truly soluble in cold water. Other gums are either insoluble in cold water or form colloidal suspensions, solutions not true. VISCOSITY A 20% aqueous solution will give less than 100 cps, i.e. Gum Arabic is not very viscous at such concentrations. High viscosity is obtained only at concentrations of 40% - 50% EMULSIFIER Gum Arabic produces highly stable emulsions making it very useful in the preparation of oil-in-water food flavour emulsions, particularly for citrus oils. TASTE Gum Arabic has no off-taste. The taste of flavoring products co-spraydried with Gum Arabic is not affected or dulled by Gum Arabic as the carrier. CALORIC VALUE Generally defined as POLYSACCHARIDE DIETARY FIBER WITH REDUCED CALORIC INTAKE. FILM-FORMING Gum Arabic's superb film-forming properties make it ideal for some confectionery coatings and lithographic plate solutions. COLOR Colorless (top quality) to pale straw color (average quality). FIBER Gum Arabic is regarded as 90% Soluble Fiber DESCRIPTION Gum Arabic is natural gum made of hardened sap taken from two species of the acacia tree. Gum Arabic appears as an off-white to yellowish granular or powder. It is used as food thickeners in food and beverages such as in icing, fillings, chewing gum and other confectionery. Nutritional properties:Enrichment in soluble dietary fibers; Improvement of digestive comfort; Source of prebiotic fiber. As an experienced Gum Arabic manufacturer and supplier, we has been supplying and exporting Gum Arabic for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Gum Arabic Specification ITEMS STANDARD Appearance Off-white to Yellowish Granular or Powder Odor Own inherent smell, no odor Viscosity ( Brookfield RVT, 25%, 25, Spindle 2, 20rpm, mPa.s) 60- 100 pH 3.5- 6.5 Moisture(105, 5h) 15% Max Solubility Soluble in water, insoluble in ethanol Nitrogen 0.24%- 0.41% Ash 4% Max Insolubles in Acid 0.5% Max Starch Negative Dannin Negative Arsenic (As) 3ppm Max Lead (Pb) 10ppm Max Heavy Metals 40ppm Max E.Coli/ 5g Negative Salmonella/ 10g Negative Total Plate Count 1000 cfu/ g Max Specifications of Acacia Gum Spray-dried Powder : ITEMS STANDARD Appearance White to off-white Powder Odor Own inherent smell, no odor Viscosity ( Brookfield RVT, 25%, 25, Spindle 2, 20rpm, mPa.s) 60- 100 pH 3.5- 6.5 Moisture(105, 4h) 10% Total ash 4% Acid insoluble ash 0.5% Acid insoluble matter 1% Nitrogen 0.24%- 0.41% Starch or dextrin Negative Tannin Negative Arsenic (As) 2 mg/kg Lead (Pb) 3 mg/kg Heavy Metals 20 mg/kg E.coli/ 5g Negative Salmonella spp./ 10g Negative Total Plate Count 5000 cfu/ g
You can customize all you innovation whether metal or plastic!
The PFA pipette tips offered by Nanjing Binzhenghong Instrument Co., Ltd. possess numerous advantages that make them an excellent choice for various applications. Here are some of the key benefits: Advantages: 1.Excellent Chemical Resistance: The PFA pipette tips exhibit remarkable chemical stability, resisting corrosion from harsh chemicals like acids, bases, and organic solvents. This ensures consistent performance and accuracy in demanding laboratory environments. 2.Wide Temperature Range: These pipette tips can withstand a broad temperature range from -200°C to 260°C, making them suitable for both low- and high-temperature applications. 3.High Precision and Accuracy: The PFA pipette tips offer precise and accurate dispensing of liquids, ensuring consistent and reliable results in laboratory experiments. 4.Low Background Values: With low metal element content (such as lead and uranium) of less than 0.01ppb, these pipette tips are suitable for high-sensitivity analytical techniques like ICP-MS and trace analysis. 5.Customizable Options: The pipette tips are available in different sizes and can be customized to fit various pipette models, meeting the specific needs of different laboratories. Durable and Reusable: The excellent stability of PFA material allows these pipette tips to be used repeatedly over a long period, reducing the need for frequent replacements and saving costs. 6.Easy to Clean: The smooth surface and precise manufacturing of these pipette tips ensure easy cleaning and minimal residue, maintaining the accuracy and reliability of the tips. 7.Transparent and Easy to Observe: The transparent design allows users to easily observe the liquid level inside the pipette tip, making it convenient for accurate dispensing. In summary, the PFA pipette tips from Nanjing Binzhenghong Instrument Co., Ltd. are an excellent choice for laboratories requiring high chemical resistance, precision, and accuracy in liquid handling applications.
