AIT500-SG has a high gain and measurement accuracy in the full bandwidth range, due to theapplicationofthe multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. The multi-point zero-flux technology system secures the high accuracy by utilizing thetechnologycombination of exciting magnetic flux closed-loop control, self-excited magnetic fluxgateandmulti-closed-loop control that realizes the closed-loop control between excitation magnetic fluxandAC/DCmagnetic flux generated by primary current, while the high-frequency ripple sensing channel allowsthesensor to have the high performance over the full bandwidth range.
HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and various irregular waveforms under the condition of complete isolation of the primary side and the secondary side. It is mainly used in the field of measurement verification and measurement calibration that requires high accuracy, and rail transit, power quality analysis, power analyzer, medical, aerospace, missile, ship and other fields that require high sensitivity, high stability and high reliability.
PSM1500 AC/DC standard meter is a new generation of standard meter produced by hangzhi precision. The product adopts a new software and hardware design, which can simultaneously measure single-phase AC and DC voltage, current, frequency, phase, active power, reactive power, inspecting power, power factor, active energy, and reactive energy etc., at the same time, high-order harmonic distortion (up to 63 harmonics) can be measured. Votlage Measuring Range: DC1000V / AC707V Current Measuring Range & Accuracy: DC1500A @ 0.02% Accuracy, AC1000A @ 0.05% Accuracy PSM1500 AC/DC standard meter can be widely used in metrology research institutes, government inspection agencies and other metrology fields for the metrological verification of single-phase AC and DC voltmeters, ammeters, electric energy meters and power meters.
The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB circuit board. It is based on the fluxgate technology and can realize the isolated measurement of DC current and AC current. Measuring range: from ±6A to ±50A. Accuracy: ±0.8%. Linearity: ±0.1. Supply voltage: ±5V. Operating temperature: -40°C~80°C. Bandwidth (3dB): 300kHz. Response time: 3us.
The CIT series high precision split core current transducer is developed by Hangzhi based on the fluxgate technology and can realize the isolated measurement of DC current and AC current. Measuring range: from Ã?±100A to Ã?±1500A. Accuracy: 0.05%. Linearity: 0.02%. Hole diameter: 40mm. Zero offset current/I: Ã?±30uA. Operating temperature: -30Ã?ÂÃ?°C~75Ã?ÂÃ?°C. Bandwidth (3dB): 350kHz. Response time: 2us. The non-intrusive installation of a CIT split-core fluxgate current transducer is one of its key advantages. There is no need to disrupt the circuit by simply clamping the device around the conductor, making it a feasible alternative for monitoring existing systems without generating downtime. These transducers are used in a variety of applications, including power distribution, energy management, industrial automation, and others. They are critical in allowing for efficient energy use, monitoring electrical systems, and guaranteeing safe and reliable operation.
BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system).
AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Key Technologies Excitation closed-loop control technology Self-excitation demagnetization technology Multi-point zero-flux technology Temperature control compensation technology Multi-range automatic switching technology Features Insulated measurement between primary and secondary side Excellent linearity and accuracy Extremely low temperature drift Extremely low zero drift Broad band and low response time Strong anti-electromagnetic interference Application Domain Medical Equipment: Scanner, MRI Rail Transit: EMU, Metro, Trolly car Power industry: Converter, Inverter Ship: Electric driven ship Renewable Energy: Photovoltaic, Wind energy Car: Electric car Testing Instrument: Power analyzer, High-precision power supply Smart Power Grid: Power generation and battery monitoring, Medium low voltage substation Industry Control: Industrial motor drive, UPS, Welding, Robot, Hoist, Elevator, Ski lift
HZ601 Collection Programmable DC Standard Power Source is a high-level meter & power source integrated instrument which invested by Shenzhen Hangzhi, who gathering high-tech talents, adopting the unique electronic compensation linear sampling technology which ensure full range linearity of small signals (�µA & mV level) and super signals (50A & 1000V). Voltage and current could be output simultaneously and output DC power as well. Besides output, the input voltage (or current) can be measured simultaneously. It builds-in DC meter verification program to easy users. High output stability: DC voltage, current output stability can reach 0.005% / min. Wide output range: standard source output DC voltage range 0 mV-1100V Standard source output DC current range: 0�µA-55A Wide measurement range: measurement input DC voltage range 0mV-1100V Measurement of the input DC current range: 0mA-55A Support self-calibration: software self-calibration to the output input gear and does not need to open the case Soft start: built-in soft start, preset load circuit,output from zero quickly rise to the set value, no impact on the load Load protection: overload prompt, flow limit for about 4 seconds after the interception protection, to ensure the safety of the load Human-PC Interaction: Large & colorful touch screen display and flexible setting to adjust the control source output parameters and easy to operate
Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200ppm (200 parts per million). The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux and AC flux, and can detect high-frequency ripple by constructing a high-frequency ripple sensing channel, so that the transducer can achieve high gains and measuring accuracy over the full bandwidth.
Hangzhi AIT300-SG is a 300 Amp High Precision Current Transducer with an accuracy of 10ppm (ten parts per million.) The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux and AC flux, and can detect high-frequency ripple by constructing a high-frequency ripple sensing channel, so that the transducer can achieve high gains and measuring accuracy over the full bandwidth.
RIT001 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC0.01, Overload Capacity: 200% for 1 minute, Power Supply: DC14.2V to 15.8V, Output Voltage: ±1V, Accuracy: 1%, Linearity: 0.2%, Zero Offset Voltage: ±10mV, Dynamic Response Time: 2ms, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC600A, AC424A, Overload Capacity: DC720A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 3000:1, Secondary Burden Resistance: 2 ~ 5�©, Accuracy: 0.05%, Linearity: 50ppm, Current Change Rate: 100A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC200A, AC141A, Overload Capacity: DC240A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 2000:1, Secondary Burden Resistance: 10 ~ 25, Accuracy: 0.02%, Linearity: 20ppm, Current Change Rate: 200A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-precision digital current sensor provided by Hangzhi for the above equipment plays a key role in the measurement of current in its process control. The digitalized data output reduces the difficulty for customers to collect current signals and greatly reduced the cost of the customers.
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range: ±1500A Output signal: standard 0-10V voltage signal Accuracy: 50ppm (Parts Per Million) Linearity: max 20ppm; Time stability: 0.5ppm/month; Temperature stability: 0.5ppm/K; Frequency Bandwidth (-3dB): 500kHz; Dynamic response time: di/dt=1.5V/us.
TC-2088 diffused silicon pressure transmitter is a high-precision pressure sensor that utilizes resistive diffused silicon elements as sensitive components. It boasts advantages such as small size, light weight, good stability, strong interchangeability, and high reliability. The sensor employs imported diffused silicon or ceramic cores as pressure sensing elements, crafted through special processing techniques to achieve high accuracy and excellent stability. The output signal of the diffused silicon pressure transmitter is a unified 0-10mA or 4-20mA signal, compatible with various types of moving coil indicators, digital pressure gauges, electronic potentiometers, and other devices for precise pressure measurement and control. This pressure transmitter finds wide application in industries such as petroleum, chemical, and metallurgical industries for pressure measurement and control of steam, air, and other corrosive media. It is also suitable for monitoring high-voltage switchgear operating currents in power plants, smoke emission monitoring in environmental protection departments, water flow indication in high-rise building water supply networks in building drainage projects, pharmaceutical liquid filtration, fermentation tanks in food processing industries, boiler water replenishment systems, air conditioning ducts, oil field water injection, and continuous measurement of media in pipelines, among other applications.
Product Introduction The wet gas flowmeter is a volumetric gas flowmeter. Its measurement range ranges from 0.016L/min for small flow to 200L/min for large flow. It has high accuracy, no leakage, and good stability. It is suitable for gas volume or flow measurement in laboratories, research institutions, environmental measurement, production sites, etc. It can also be used as a transmission standard and working standard, and is widely used in gas appliances, energy, chemical industry, environment, medicine, calibration and other industries. The products have been exported to Europe, America, Asia and other countries and regions. � Product Features 1. Extra-wide flow range 1:300 2. Repeatability better than 0.1% 3. Intelligent correction (Volume and flow rate automatic correction) 4. Various automatic measurement methods (constant volume output, timing output, and fixed whole revolution output) 5. Full digital flow meters (Temperature, Pressure, Volume, High-precision measurement of flow, RS485 Bus Communication) 6. Intelligent wire control start and stop 7. Each is strictly calibrated with � 0.05-stage active piston prover to ensure accuracy 8.� No leakage (using advanced magnetically coupled transmission technology, non-oil seal) � Precision (Repeatability) Standard Flow Range: �± 0.1% (Standard deviation) Entire Flow Range: �± 0.15% (Standard deviation) � Material (Anti-corrosion) 304 stainless steel 316 stainless steel (customized) Temperature measurement: 0-50 Pressure measurement: 0-10kPa
AIT600-SG has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Measuring range: ±600A Output signal: analogical current output Accuracy: max 10ppm Linearity: max 2ppm; Time stability: 0.2ppm/month; Temperature stability: 0.1ppm/K; Frequency Bandwidth (-3dB): 500kHz; Dynamic response time: 1uS & 100A/us.
we provide � Balance Testing,Biomedical,Healthcare Refrigerators & Freezers,Feeding Pumps/IV Pumps,Emergency Medicine,Electrosurgery,Disposables,Cognitive Measurement & Management,Defibrillators & AEDs,Dental,Dental Products,Allergy Testing
We provide  Balance Testing,Biomedical,Healthcare Refrigerators & Freezers,Feeding Pumps/IV Pumps,Emergency Medicine,Electrosurgery,Disposables,Cognitive Measurement & Management,Defibrillators & AEDs,Dental,Dental Products,Allergy Testing
