Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Technical Parameters Table size (LxW): 1300x700 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 600 kg; X/Y/Z Axis travel: 1200/700/600 mm; Distance from spindle nose to table surface: 100-700 mm; Main spindle speed: 8000 rpm; Spindle motor power: 11/15 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 22/22/22 Nm; Rapid feed speed (X/Y/Z): 24/24/24 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 6800 kg; Machine overall size: 5300x2550x2600 mm;
Double switching table horizontal machining center HMC-63 double exchange table horizontal machining center is mainly suitable for parts processing in construction machinery, automobile, energy, information, mold and other industries. Especially suitable for all kinds of special-shaped parts, box parts processing. Workpiece once clamping can complete multi-sided milling, drilling, boring, expanding, reaming, countersinking, tapping and other processes processing, effectively improve efficiency and save costs, while reducing the cumulative error caused by the workpiece multiple clamping, improve processing accuracy. The machine adopts a positive T-shaped structure, the column moves around (X axis), the headstock moves up and down (Y axis) and the table moves back and forth (Z axis), and is equipped with a double exchange rotary table and a large disc servo tool library. Product characteristics PRODUCT CHARACTERISTICS The all-in-one molding bed is made of T-box structure, high-quality resin sand molding and high strength cast iron material, and is heat-treated to eliminate internal stress. Through finite element analysis, the layout of reinforcement is optimized to fully meet the needs of high torque cutting. The double-wall structure design of the column, the internal multi-point radial reinforcement arrangement, the bottom of the large span section arrangement, light weight, good rigidity, good dynamic performance. Through the finite element analysis of structural statics and dynamics, the reasonable structural design and the combination of reinforcing bars ensure the high rigidity of the box and the machining rigidity of the spindle parts. The machine tool is equipped with a rotary exchange double workbench, which reduces the time of the machine tool standby clamping workpiece and greatly improves the processing efficiency. The mechanical CAM rotary exchange mechanism makes the workpiece exchange more stable and rapid. High precision CAM turntable adopts high precision taper positioning pin and oil pressure force doubling locking mechanism to ensure the clamping of the table and ensure the smooth and no vibration of the table during cutting.
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Technical Parameters: Work table size (LxW): 630x630 mm; No. of table: 1 pc; Minimum indexing unit: 1 deg.; Maximum loading capacity of work table : 1500 kg; X/Y/Z Axis travels: 1200/850/1000 mm; Distance from spindle center to table surface: 30-830 mm; Distance from spindle nose to table center: 100-1100 mm; Spindle taper: BT50 ; Main spindle speed: 6000 rpm; Main motor power: 15/18.5 kw; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 20/20/20 m/min; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 125/220 mm; Maximum length of tool : 350 mm; Maximum weight of tool: 25 kg; Tool change time(T-T): 5 sec; Positioning accuracy (X/Y/Z): 0.010/0.010/0.010 mm; Repeated positioning accuracy (X/Y/Z): 0.005/0.005/0.005 mm Positioning accuracy(B): 10 arc.sec. Repeated positioning accuracy(B): 2 arc.sec. CNC Controlling system: Fanuc ; Machine weight: 8000 kg;
Product Description Product Info for Swarovski 1.7-13.3x42 Z8i P L Riflescope (4A-IF Illuminated Reticle, Matte Black) Swarovski designed and built the 1.7-13.3x42 Z8i P L Riflescope with a 30mm maintube to deliver uncompromising optical performance, precision, and durability. With its high-quality optical system, lens glass, and fully multi-layer anti-reflection coatings, it provides brilliant and sharp images with high resolution. No matter when you hunt, its state-of-the-art optical system will deliver bright, crisp, and clearly visible images with a versatile 42mm objective aperture. The objective and ocular lenses are further enhanced with a SWAROCLEAN coating to ensure that water droplets and dirt can be easily removed without a trace. To help with ballistic and wind drift compensation, this scope offers a 54 MOA windage and elevation adjustment ranges with 0.36 MOA click values. Swarovski Z8i Specs Performance Magnification 1.7 to 13.3x Objective Lens Diameter 42 mm Field of View 1.7x: 75.6' @ 100 yd / 25.2 m @ 100 m 13x: 9.3' @ 100 yd / 3.1 m @ 100 m Exit Pupil Diameter 1.7x: 8.1 mm 13.3x: 3.1 mm Eye Relief 3.7" / 95 mm Diopter Correction -3.0 to +2.0 Reticle Reticle Type 4A-IF Reticle (Second Focal Plane) Features Filter Thread M44 x 0.75 Impact Point Correction 0.4 MOA per Click Windage Adjustment 54 MOA Elevation Adjustment 54 MOA Parallax Correction Yes, 54.6 yd / 50 m to Infinity Environmental Water Resistance Waterproof to 13.1' / 4 m Fogproof Yes Operating Temperature -4 to 131 F / -20 to 55 C Storage Temperature -22 to 158 F / -30 to 70 C General Maintube Diameter 30 mm Battery 1 x CR2032 Battery Runtime 180 to 1400 Hours (Average) Dimensions Length: 13.2" / 33.6 cm Weight 21.9 oz / 620 g Packaging Info Package Weight 3.15 lb Box Dimensions (LxWxH) 16.2 x 4.5 x 3.8"
Cocofiber is coconut coir fiber produced through turning and drying processes. This coconut fiber generally has a length depending on the method of separation. Meanwhile, Cocopeat is a powder from coconut fiber which is separated from Long Fiber/Coco fiber. Coconut Plants. is a plant that has many uses from each part. Coconut coir is mainly used to replace foam materials in beds, chair cushions, coir mattresses, coir mats, geo textiles, plant boxes, soil erosion inhibitors, mattresses, car & sofa upholstery. *Specification ; I. Dimension : 40 X 70 X 110 II. Weight : 100-110 KG/ball III. Air Content : 10 -15% IV. Fiber : 10cm up VI. Purity Level : 3 - 7% VII. Measurement :
Coco Pith HS CODE 53050040 Features Ability to withstand high compaction force Eco-friendly and user-friendly 100% soil-less growing medium Soil conditioning and mulching agent Available in two variants Applications Large-scale nurseries, garden centers and agricultural fields. Washed / Low EC Coco Peat Specification Sl. No. Description Values 1 Block size 30 x 30 x 12cm +/- 1cm 2 EC Level Below 0.5ms/cm 3 pH level 5.8 - 6.8 4 Mesh 6 mm 5 Compression ratio 5:1 6 Expansion volume 15 Liters per kg 7 Moisture below Unwashed / High EC Coco Peat Specification Sl. No. Description Values 1 Block size 30 x 30 x 12cm +/- 1cm 2 EC Level Below 2.5ms/cm 3 pH level 5.8 - 7 4 Mesh 6 mm 5 Compression ratio 5:1 6 Expansion volume 13-14 Liters per kg 7 Moisture below Product Origin - Made in India only Minimum Order Size - Can be processed as per client requirement
Place of Origin:Guangdong, China (Mainland) Brand Name: Frida Model Number:B-001 Type:Baby Shoes Outsole Material: Foam/Rubber/Gum-rubber Insole Material:/Leather/Suede Vamp fabrics:Leather/Cotton fabric or Gretel fabric(optional) Color:Multi other colors for optional SIZE:0~24 Months(Optional) MOQ:100 pairs mix color mix size Samples:Available( Charge for fee) Samples Tim:7-15 days Packaging Details: 1pair/polybag,then bulk into master carton or follow up customer's requirement to packing. Port:SHEN ZHEN Lead Time 1 - 100 >100 Quantity(Pairs) 1 - 100 >100 Est. Time(day) 30 To be negotiated Payment: T/T, L/C,Western Union,Cash,ESCROW,Paypal Trade Term: FOB/CIF/C&F/DDP/DDU/EXPRESS DELIVERY. Shipment: Ocean shipping,Air Way,International express. OEM Service: Customized logo, pattern, styles and packing are all available
# Product material:carbon steel,stainless steel,aluminum,Glass Fiber Reinforced Plastic #Product surface:Polished,Aluminum Oxidation Spray coated Hot dipped galvanized Galvanize Plain Steel,zinc aluminum magnesium # Product size:1-5/8"x 1" , 1-5/8"x 13/16", 1-5/8"x 1-5/8", 1-5/8"x 2-7/16", 1-5/8"x 3-1/4"(41 x 25 mm, 41 x 21 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm) # Product thickness: 18 GA 17 GA 16 GA 15 GA 14 GA 13 GA 12 GA (1.0 mm,1.2 mm,1.5 mm 1.8 mm 2.0 mm ,2.5 mm) , Others also welcome # Product Length:6' 10' 20' ,1.8 m 2.4 m 2.9 m,3.0 m,5.8 m,6.0 m ,Cut to Length upon request. # Application:Cable management support,Pipe and conduit supports,HVAC Duct Support,Pillar racking system,ceiling grid support bracket,Machine support protection,Solar panel bracket. We can offer # Full line of solid strut channel, slotted strut channel,welded strut channel, hole and patterns are available # Full line of fittings, clamps and strut supports # Wide variety of strut materials and finishes Hot questions Q1: Are you manufacture? A: No,we have partner in Wuxi Langfang city. Q2: How can I request product samples? A: The samples are free but courier charge will be collected. Please send us samples list and courier account number. Q3: How can I request a product catalog? A: The hard copies of catalogs are free but courier charge will be collected.The PDF catalog we can send to you by email or chap App. Q4: What is your payment terms? A: 30% T/T deposit,balance against B/L copy; Irrevocable L/C 100% at sight and irrevocable. Q5: How about the delivery time? A: Accord to your order list and quantity,mostly delivery in 30 days. Q6. Why choose us? 1. We are Songyin Leading supply of Strut Channel and Fittings. 2. Inspected by the Inspection Institution by standard of DIN-ISO-2768 3. 100% QC inspection before Shipment.
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 500x630 mm; Maximum cutting thickness/ Maximum height of the part: 600 mm; Maximum Work piece weight: 700 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 600x860x600 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 150 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150; Approx. Machine size (LxWxH): 2000x1950x1750 mm; Approx. Machine weight: 2540 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 ;
SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime. Fractional photothermolysis with a CO2 laser shows promise in the treatment of photodamaged skin. The purpose of this study was to evaluate a fractional CO2 laser device (SmartSkin, Cynosure, Westford, MA) for the treatment of facial photodamage. Cynosure Smartskin Fractional CO2 Laser; Excellent Cosmetic & Operating Condition; Manufactured 2014; Reason for Selling: Downsizing; Includes: Scanner Handpiece, Footswitch, Key,Operator Manual. System Type:Co2 Wavelength:10,600 nm Power:30 W (max) Output Mode:Multimode Method of optical output:Articulated Arm Aiming Beam:Laser Diode, 3 mW @ 635-670 nm Electrical Requirements:100-115 V / 10 A (max) /50-60 Hz Size: 46.1³ H x 18.1³ W x 24.00â?³ D (117 cm x 46 cm x 61 cm) Weight:108 lbs (49 kg) Evacuation System:Buffalo Filter Smoke Evacuator â?? Available Separately Scanner: Scan Area Size:15 mm x 15 mm (max) Spot Size:350 um Scan Mode:Normal, Interlaced and Autofill*, *Not available in ablative mode Mode:Super Pulsed Pulse Duration:0.2 ms 2.0 ms (Fractional Ablative); 0.2 ms â?? 20.0 ms (Ablative) Density:1 78% (Fractional Ablative; 78% (Ablative) 4â?³ Surgical Handpiece: Spot Size d63:0.214 mm Mode:Continuous, Pulsed and Super Pulsed
Purchase 1 Unit New 2023 Cannondale SuperSix EVO Hi-MOD 1 Road Bike from Bambobike is 100% safe, because buying products at Bambobike provides a 100% money back guarantee. Bambobike Address: Jl. Irian Barat No.121i, Gg. Buntu, Kec. Medan Tim., Kota Medan, Sumatera Utara 20212 - Indonesia For online purchases, visit site us: https://bambobike.com/ Price : $ 8100.00 Phone : +6282267267645 Delivery time : 7 Days Express Port : CIF/ Kualanamu International Airport Packaging : Box Original Shipping : Worldwide use FedEx, DHL, UPS. Payment Terms : Bank Transfer (T/T), PayPal, Wise Transfer, Western Union (WU), MoneyGram and WorldRemit SPECIFICATION : FRAME SuperSix EVO Hi-MOD Carbon, integrated cable routing w/ Switchplate, 12x142 Syntace thru-axle, BSA 68mm threaded BB, flat mount disc, integrated seat binder, SmartSense compatible FORK SuperSix EVO Hi-MOD Carbon, integrated crown race, 12x100mm Syntace thru-axle, flat mount disc, internal routing, 1-1/8" to 1-1/4" Delta steerer, 55mm offset (44-54cm), 45mm offset (56-61cm) HEADSET Integrated, 1-1/8" - 1-1/4" REAR DERAILLEUR SRAM RED AXS FRONT DERAILLEUR SRAM RED AXS SHIFTERS SRAM RED eTap AXS HRD, 2x12 CHAIN SRAM RED, 12-speed CRANK SRAM RED AXS Carbon, 48/35 REAR COGS SRAM XG-1290, 10-28, 12-speed BOTTOM BRACKET SRAM DUB BSA BRAKES SRAM RED eTap AXS HRD, 160/160mm Centerline-X rotors BRAKE LEVERS SRAM RED eTap AXS HRD RIMS HollowGram R-SL 50, Carbon, 20h front, 24h rear, 50mm deep, 21mm inner width, tubeless ready SPOKES DT Swiss Aerolite, straight-pull TIRES Continental Grand Prix 5000, 700x25c HUBS (F) HollowGram, sealed bearing 12x100mm centerlock / (R) HollowGram, 12x142mm centerlock w/ DT Swiss 240 internals HANDLEBAR Cannondale SystemBar R-One - low drag, full carbon integrated bar/stem, internal routing STEM Cannondale SystemBar R-One - low drag, full carbon integrated bar/stem, internal routing GRIPS Cannondale Bar Tape, 3.5mm SADDLE Prologo Dimension NACK NDR, Carbon Rails SEATPOST Cannondale C1 Aero 40 Carbon, 0mm offset (44-48cm), 20mm offset (51-61cm)
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
Product Description CCTV Inspection Camera the long proven as a fully equipped package with an attractive special equipment has been reintroduced to our portfolio by popular demand. A new design, practical details and a full range of accessories at an attractive price make it a pleasure to work with FOC CCTV Camera. Application: Light shade Accessory case (without image) Compact keyboard Data indication RS 232 Electronic metre counter Integrated power supply unit 12 V auto adapter Drain program PIPEX+ TINY tests adapter Balljoint Servicebook with operation manual USB connector Specifications: Proven easy to clean optimum picture quality one hand operation FOC CCTV camera probe Ã?? 36 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter VERTICA camera probe Ã?? 40 mm Quick-change connection, 5 bar pressure-tight, with tightness test adapter, always upright picture FOC CCTV mini colour camera probe Ã?? 25 mm DN 40 at least 5" x 90" bends, with 5 m push cable Ã?? 3 mm, hasp mounted on the TINY-hasp Adapter for FOC CCTV Camera Control unit with integrated power supply unit, colour TFT monitor with light shade Adjustable camera lighting, video in and out. Data indication with meter, date and time display, electronic meter 24 characters/ 12 lines, PC interface RS232 incl. Drain program PIPEX+ operation of the data input unit via PC Clamp Brush slide aluminium, with brush set 100 mm for camera and spring end piece Side bag for keyboard and accessories
