Coffee roasting is a highly participatory process. There are visual clues in the shape of color and shine, in addition to the smells released during roasting, as well as audio indications in the form of cracks. Green coffee beans typically have a grassy or hay-like aroma. They initially smell more like coffee the longer they are roasted, then The little moisture that is left inside the coffee beans starts to heat up and expand as they roast. Light roasts: When coffee is brewed, beans that have been lightly roasted release a delicate flavor. Compared to other roasts, they have a higher acid content. Since they haven't been roasted for long enough to extract their oils, their surface also seems dry. High-quality beans are frequently roasted to this level in order to make their natural flavor stand out more than the roasted flavor. moderate roasts Medium-roasted coffee beans, often known as American roast, have a medium-brown hue, a somewhat toastier flavor, and less acidity than beans that have been lightly roasted. Because of its balanced flavor and acidity, this kind is preferred by the majority of people. Dark roasts: Coffee beans that have been darkly roasted are distinguished by their intense, smokey flavor, lustrous black surface, and extremely low acidity. In order to mask their natural flavor with a toasted flavor, this method of roast frequently uses low-quality beans. Nutritional Facts Calories 18 Calories from Fat Total Fat 1 g Saturated Fat 0 g Trans Fat 0 g Cholesterol 0 mg Sodium 0 mg Total Carbohydrates 0 g Dietary Fiber 2 g Sugar 0 g Protein 0 g Vitamin A0% Vitamin C 0% Calcium0% Iron 1% Bulk Packaging Packaging Package Size Jute Bags/PP Bags/Cartoon Boxes/Sacks 25kg/50kg/Customize Packaging Retail Packaging Paper Pouches 250g/500g/Customize Packaging
In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer? Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer. Parameters Place of origin: Baoji, China Brand: TOPTITECH Filtration precision:0.2um-100um Material: titanium Working temperatureï¼?â?¤ 300â?? Length: 30-1000mm(More than 1000mm can be welded) Thickness: â?¥0.5mm FEATURES High corrosion resistance: Titanium is a highly corrosion-resistant material, making it suitable for use in harsh environments. High strength-to-weight ratio: Porous titanium plates are lightweight yet strong, making them ideal for applications where weight is a concern. High porosity: The porous nature of titanium plates allows for efficient diffusion of gases, making them well-suited for use in electrolyzers and fuel cells. Customizable properties: The pore size and distribution of porous titanium plates can be tailored to meet specific application requirements, allowing for greater flexibility in design. Excellent thermal conductivity: Titanium has a high thermal conductivity, which allows for efficient heat transfer and thermal management in fuel cells and electrolyzers. Long service life: Due to its corrosion resistance and durability, porous titanium plates have a long service life, reducing maintenance and replacement costs. Ease of manufacturing: Porous titanium plates can be manufactured using a variety of techniques, including sintering, powder metallurgy, and electrochemical etching, making them easy to produce in large quantities and at a reasonable cost.
Fully incorporated SSAS and LRIT capabilities. a mobile Earth Station that provides a high-quality two-way telex and data link between ships and other parties at sea or on land. Inmarsat-C is a mobile Earth Station that provides a high-quality two-way telex and data link between ships and other parties at sea or on land. All functions and services of the Inmarsat-C system are provided: EGC (Safety NET/FleetNET), distress message handling, two-way digital store-and-forward messaging including polling, data reporting, E-mail, etc. Distress alert are initiated by the remote distress alert unit. The distress message including s position is easily edited.Inmarsat-C Mobile Earth Station terminal for GMDSS application Full GMDSS compliance with optional printer and AC/DC power supply SSAS capability with SSAS Alert Unit Compatibility with LRIT application A wide variety of communication schemes available: telex, FAX, emailing, EGC, data reporting/polling, etc. SD card for recording media optional internal GPS engine is available. Inmarsat-C consists of an antenna and display unit with keyboard. The display unit embodies a 10.4 color LCD and processor unit. The distress alert button is incorporated in the display for emergency. Data files and utility program on SD Memory Cards are easily loaded into the processor through the front-loading card slot in the display unit. The compact design of display unit and Omni-directional antenna unit offer space-saving installation. An optional GPS module is available for position reporting without operator s intervention. GMDSS compliance can be achieved by adding a printer and an AC/DC power supply unit.
High temp secondary air filter choose high strength and high temperature resistant glass fiber,and the proprietary assembly process ensures stable efficiency at high temperatures. A variety of rated air volumes are available, and it is the main filter for high-temperature drying processes in industries such as dry spray paint, coating,and gluing. filter is a kind of High temp secondary air filter with compact design,adopting special high temp resistance glass fiber, with the efficiency rate of F6,F7,F8,F9. The normally operating tempreture can reach15 180 250 This type of High temp filters have obvious characteristics, it's designed with very thin structure, so the installation space is not limited. Its dust content is very high, for many manufacturers is a very economic and practical choice. Even if it is used in a high temperature environment, there will be no fiber breaking or fiber falling, which is to make everyone very satisfied. Handy and quick out of the water The outer frame adopts aluminum alloy profile, Galvanized frame or stainless steel; Ultrafine glass fiber filter material, metal protective net; Inflammability, low hygroscopicity, can be used in 250 environment for a long time. Reinforced grid Two sides surfaces of the High temp air filter are reinforced with galvanized iron wire or stainless steel wire, which can be used normally in the environment of high air volume. This secondary High temp air filter also has ther advanced performance of large effective filtration area,long service life, and low initial pressure drop. Application High temp secondary air filter are mainly used for high-temperature sterilization tunnel, ultra-clean oven and other high-temperature air purification devices and systems in the pharmaceutical industry. It is especially suitable for painting workshop in automobile factory It is air filter is used in painting workshop in lithium battery production line. It is used in other ventilation systems with high fireproof requirements or high ventilation temperature
High Efficiency Synthetic Air Filters are made of synthetic media and are available in all common dimensions and EN 779 filter classes. They can be supplied in 25 mm thick plastic frames as well as in 20 mm or 25 mm thick metal frames. A continuous foamed-in-place seal over the edge of the filter assures fully airtight mounting. Air filter performance is measured by dust holding capacity and efficiency. Greater dust holding capacity means longer service life and lower operating costs. Greater efficiency means cleaner air and reduced maintenance costs. SNYLI Bag Filters excel in both of these performance characteristics. We have MERV 14, MERV 13, MERV 11, and MERV 9 available in both Synthetic and Fiberglass. High Efficiency Synthetic Air Filters provide high-efficiency filtration where a clean air environment is a necessity. This includes Hospitals, Laboratories, Office Buildings, Food and Beverage Processing Plants. etc. Greater dust holding capacity means the longer service life and lower operating costs. Greater efficiency means cleaner air and reduced maintenance costs. Snyli Bag Filters excels in both of these performance characteristics. Specifications Frame:Galvanized steel /Aluminium alloy /Stainless steel Media: Synthetic fiber Design:Pocket type EN779: G4-F9 Collor: White G4; Orange F5: Green ,F6; Pink,F7; Yellow F8; Whilte,F9 US ASHRAE52.2: MERV 7 to MERV 16 Max temperature: 93 Max relative humidity: 100% Competitive Advantage Make sure the operation is long-lasting and has a good dust-holding capacity. High efficiency. Can be designed with different bags quantity to meet different airflow requirements. Low initial pressure drop.
Frame material : Galvanized frame/ Aluminum alloy frame/ Stainless steel frame Frame thickness:10/21/46/96 etc Filter material:aluminum wave nets/stainless steel nets Maximum temperature:above 250â?? Maximum humidity:100% Optional aluminum depth 7~96mm Efficiency:G1 G2 (EN779)45%~95%@0.5�¼ Customized size: Available Packing : Inner packing is carton ,outer packing is pallet Port: Qingdao SPECIFICATION The metal mesh pre air filter adopt multi-layer expanded aluminum foil mesh or stainless steel mesh and the metal mesh is pressed into undulations and intersect each other at appropriate angles Metal meshes are arranged from thick to fine according to density and pore size, thus increasing the dust collection capacity and filtration efficiency. The initial resistance is lower than 20Pa. APPLICATION 1.The metal mesh pre air filter can used for clean room conditioning system ,pre-filtration through fresh air venting units ,and exterior air conditioning connection . 2.Primary filtration for central air conditioning system . 3.Pre-filtration at the intake of Air purification equipment . 4.Primary filtration in a filtration system . 5.Ventilation system for outdoor and other harsh environments. 6.Pre-filtration in Ventilation system for outdoor fire-proof and high temp resistance working condition .
PALM BROOMSTICK (Raw Material) A journey process of Palm broom stick. We named our product "Palm Leaf Lidi" They come from palm leaf waste, which is then collected by oil palm harvesters to be sold to coconut leaf waste collectors. They - these collectors - then distribute it to other workers whose job is to split the leaves into small sticks, and then dry the small sticks until they are completely dry. The dryness produced from a bunch of palm sticks must reach at least 95%. Climate change is one important thing that affects production capacity. During the rainy season, the workers cannot dry the sticks and have to wait until the sun shines with a minimum temperature of 30 degrees Celsius. After the sticks are dry, the workers tie them 1kg per bunch, and combine the bundles into bigger bundles - 50kg per big bundle. With a cutting tool, the large bundles were flattened to get the same size, ie 40 yards per stick. After re-testing for dryness level and size accuracy, the palm sticks are put into sacks per 50 kg. They are ready to be shipped. Product Specifications - Minimum dryness rate: 95% - Length: 1 yard - Packed in one big bundle per 50kg in one sack Business Description - Processing Land: Processing Sector II - Bangkinang, Kampar Regency, Riau Province - Production Capacity: 25 US tons/month Minimum order terms; - 20ft Container - contains 400 sacks of 50kg each Purchase system - First come first serve - FOB - Bank Transfer with an initial payment of 30%
Aixun 2 in 1 Face ID Dot Projector Repair Fixture for Phone X XR XS MAX 11 12 Pro Max Product Application : Lattice maintenance separation and bonding Disassembly of the camera module and 3D fixed design Disassembly, assembly and maintenance of the front infrared camera The twisting magnetic ring clamp can adjust the tightness at will without hurting the dot matrix cable Applicable models X XS XS Max 11 11 Pro 11 Pro Max 12 Compact design, more suitable for operation under microscope Product Advantages : Aixun 2-in-1 Dot projector repair Jig Initiated repair jig / repair holder 2-in-1 design One is better than multi, with great compatibility, easy to repair . Powerful function, make the Dot projector repair easier and smoother. Multiple core functional advantages, all for better assisting you For separation and lamination of dot projector repair 3D fix design for camera module dismantling For front infrared camera dismantling repair The knob clamp for porcelain ring can adjust the tightness freely, avoid damaging to flex cable. Powerful function, make the Dot projector repair easier and smoother. Product Parameter : Item name: Aixun 2nd Gen 2-in-1 Dot Projector Repair Jig Brand: Aaixun Model: AX-J02 Color: Grey Net Weight: 50g Size: 76*311*23mm Applicable Models: X-12 * Above data are measured by Aixun Laboratory, please refer to the physical product. Package List : 1pc x Aixun 2 in 1 Repair Fixture
product description: C5/C9 copolymer resin is a kind of thermoplastic resin produced by pretreatment, polymerization, distillation and other processes of C5 and C9 fractions produced by petroleum cracking. It is not a high polymer, but a low molecular weight between 300-3000. Polymer. It has the advantages of C5 petroleum resin and C9 petroleum resin. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance. It is chemically stable to acid and alkali, and has the characteristics of good viscosity adjustment and thermal stability. Since the structure does not contain polar groups, it has good water resistance, acid and alkali resistance, weather resistance and light aging resistance. It has good solubility in organic solvents, especially in petroleum solvents, similar to other resins. The compatibility is very good, and it also has brittleness, viscosity increasing, cohesiveness and plasticity. It is generally not used alone, but as an accelerator, regulator, modifier and other resins.ã?? Product application areas: C5/C9 copolymerized petroleum resin is used in hot melt adhesives, synthetic rubber, adhesives, paints, rubber soles, tires, etc., and is suitable for high-demand rubber products such as radial tires. It can not only increase the adhesion between the rubber particles, but also It can improve the adhesion between the rubber particles and the cord. In the field of hot melt adhesives, adhesives, and adhesives, C5/C9 copolymerized petroleum resin can not only provide better initial viscosity, but also can be used like rosin resin. To adjust the durability and bonding strength of the glue and resin mixture. It can be used as a substitute for terpene resin, rosin glyceride, etc.
Chemical Name: Tetraethyl thiuram disulfide Specification: Item Crystal Oiled crystal Granule Appearance Light yellow crystal(granule) Initial M.P. �¿C â?¥ 66.0 66.0 66.0 Loss on drying % â?¤ 0.30 0.40 0.30 Ash % â?¤ 0.30 0.40 0.40 Residues on 840�¼m sieve, % â?¤ 0.00 0.00 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 2.50 Properties: Light yellow crystal(granule). Odorless. Specific gravity: 1.27--1.30. Soluble in benzene, toluene, carbon disulphide, acetone and chloroform; Insoluble in water, dilute acid and alkali, partly soluble in gasoline and alcohol. Sensitive to skin and mucosa. Have certain toxicity, good storage stability. Application: A primary accelerator and curing agent for NR, SBR, nitrile and EPDM. The efficiency sulphur content is 11%. Closely resembles Accelerator TMTD in its applications. Have high catalytic action to acids and guanidine type accelerator. Less scorch and blooming, good processing safety. Can be used in CR as an anti-scorching agent and as raw material for germicide, pesticide and medicine. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35â?? can cause unusual compacted product.The validity is 2 years.
Chemical Name: Zinc 2-mercaptobenzothiazole Specification: Item MZ-5 MZ-15 Powder Oiled powder Powder Oiled powder Appearance Light yellow powder Light yellow powder Initial M.P. �¿C â?¥ 200.0 200.0 200.0 200.0 Loss on drying % â?¤ 0.30 0.50 0.30 0.50 Zinc content % 16.0-22.0 16.0-22.0 15.0-18.0 15.0-18.0 Free M % â?¤ 5.0 5.0 15.0 15.0 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 0.10 0.10 Additive, % -- 1.0-2.0 -- 1.0-2.0 Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between Accelerator MBT and Accelerator MBTS. Used as a secondary accelerator in combination with Accelerator ZDMC and Accelerator ZDEC. Have the similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Plastic thin wall food container packaging box mould Mould Base LKM Standard, HASCO Standard , etc. Mould Material P20/718/738/NAK80/S136/2738/2316/H13, etc. Moud Precision +/-0.01mm Mould Life 50-500K shots Mould Cavity Single cavity, multi-cavity Runner System Hot runner and cold runner GateType Pinpoint Gate, Edge Gate, Sub Gate, Valve Gate, etc. Equipment CNC,EDM,Cutting off Machine,plastic machinery,etc Plastic Material PA6,PA66, ASA, POM, PPS, ABS,ABS+GF,ABS+PC,POM(Derlin),PP, etc Surface Treatment Polishing,Painting,Chroming,Anodizing, Quanlity System ISO 9001: 2019 Plastic packaging container refers to a container made of plastic raw materials for packaging articles. With the rapid development of petrochemical industry and the rapid development of the plastic industry, plastic packaging containers have replaced packaging containers made of metal, glass, ceramics, wood and other materials in many aspects, showing strong vitality. â? According to the nature of the raw materials used, there are mainly polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyester, polycarbonate and other containers. According to the classification of container molding methods, there are mainly blow molding, extrusion molding, injection molding, stretch molding, rotational molding, vacuum molding and other containers. Classified according to shape and purpose, there are mainly plastic boxes, plastic barrels, plastic bottles, plastic bags, plastic hoses, etc. We will meet your needs in tooling builds and injection molding, rapid scale up ramps for initial market launch, and full-scale manufacturing. Our focus is on innovative products and specialized in shortening the time between development time and manufacturing for our customer.
PTFE Teflon Coated Fiberglass Cloth Without Release Paper Product Description PTFE cloth tapes are produced with either silicone or acrylic pressure sensitive adhesive system. The silicone adhesive coated products have a continuous operating temperature range between while the acrylic adhesive coated products provides high initial tack, enhanced solvent resistance and a continuous service temperature range of The PFTE coating provides optimal release, dimensional stability and outstanding heat resistance. PTFE cloth tapes have low friction and function well as electrical insulation. Bocheng PTFE Glass Cloth Futures: High temperature resistance Surface smooth, non-stick and easy to clean. Fire retardant. Excellent dimensional stability and high strength. High insulation, anti-ultraviolet, anti-static. Resistant to chemical corrosion, strong acid, alkali and various organic solvents. Easy to use, long service life. Common thickness: 0.13mm 0.17mm 0.18mm 0.2mm 0.23mm 0.3mm Common width for little tapes: 13mm 19mm 25mm 38mm 50mm, with color box, with opp bag For other width, customizaiton is available, but the waste should be taken into considertaion. Color: Brown, Black or White. Application of PTFE Adhesive Tapes High temperature roller coating, heating plate and de-moulding fixture. Food, medicine and plastic bag heat seal. Liner pasting for sliding chute, hopper and aviation mould, can also be applied in the cylinder of slurry machine, thermal plastic & de-moulding, and other industries, which is reusable and easy to replace. Applicable to other surface treatment which need to be resistant to adhesion, corrosion and high temperature. Used in packaging, thermoplastic, composite, heat sealing, electronic and electrical industries.
Made from cassava or cassava soaked using organic enzymes or through a fermentation process with enzymes without additional ingredients and produces gluten-free flour. Features of Mocaf : - The characteristics are good enough to substitute or replace 100% of the use of wheat flour - Used as vegan food, pharmacy, and industrial needs. - Popular in Europe, America and Asia - 100% Gluten Free. - 100% High Fiber, Low Gycemic Index, No artificial Color or Flavor. - Strictly and hygienically processed from selected cassava with organic enzymes - Premium quality and odorless - Contains Calcium, Low Glycemic Index, Low Sugar, Rich in Minerals, Carbohydrates, Vitamin C, Protein, Phosphorus and Fiber which is higher than wheat flour. - MOCAF has a different characteristic compared with ordinary cassava flour and starch (Tapioca), especially in terms of the degree of viscosity, gelation ability, power and ease of rehydration dissolves better. - Suitable for consumption to support a healthy diet. - Safe for people with diabetes, autism and celiac disease to consume. - Suitable for healthy diet program Our cassava flour was firstly initiated as an empowerment program for cassava farmers in Banjarnegara, Indonesia in 2014. The project developed into a sociopreneur-based industry since 2017 and we have collaborated with more than 452 farmers divided into 11 fostered Cassava Farmer Groups. We are committed to build an environmentally sustainable and responsible business. In the effort to reach the goal we collaborate with our Cassava Farmers Group to implement environmentally responsible and integrated farming.
Industrial GPRS data collection device for digital signals of industrial systems and pulse signals of residential meters Cost-effective, C-rail mountable industrial modem for receiving digital signals and collecting pulse signals of residential meters. The modem is capable of continuously counting the pulse signals of up to 4 meter systems. The device transmits the calculated input signal values through Modbus TCP protocol to query servers Modbus TCP. The queries of the data sets are performed periodically (e.g. in every 15 minutes) depending on the server value set. When it has to receive signals from more than 4 devices, we suggest using the M2M IO/RS485 CONCENTRATOR�® which has 32 input lines. In this case the device requests the concentrator input counter status through the modems RS485 interface, and fowards the received Modbus RTU reply through Modbus TCP protocol to query the servers Modbus TCP. The modem can initiate queries through its RS485 interface towards several concentrators input lines. Furthermore, the modem can switch external devices (optionally) with the help of its 2 relay outputs. Communication Supporting GSM/GPRS (Gemalto�® industrial module) 4 inputs (digital or pulse/voltage) 2 relay outputs (optional) Software/Configuration Modbus protocol communication Modbus Gateway Consumption meter compatibility (receiving and counting pulse signals) Configuration software (on RS232 or RS485 port) Extras Memory for storage of applications, data (with ftp possibility) External IO-expansion (optional for receiving 32 inputs per module) Firmware upgrades (ftp server) Safety External battery connection (spare power supply) Watchdog circuit and system monitoring, log Automatic mobile network connection recovery Application Data collection (digital or pulse signal) Forwarding data of industrial systems Smart metering (remote readout) Measurement and data collecting systems Remote monitoring of devices Monitoring of input lines Remote control (optional)
Model No.: ATF 3000 Product Description: Typical standard technical data are as follows, 1. Operating system: Windows win 07 2. LCD screen: 10.4 inches touch screen, support outdoor operating 3. External lifting pressure: 0-30KN (could have 50KN extra pack) 4. Force sensor range: 200Kg,500Kg,2000Kg,2000/5000Kg 5. Force sensor accuracy: 0.2% F*S 6. Working temperature: -10~60 ºC 7. Humidity Level: less than 85% R*H 8. Power supply: inside and outside Li Battery, double supply. Working hours >= 9 hrs 9. Valve opening mode: displacement method, voice frequency method, according to different site scenarios. Displacement method: High-precision displacement transducer helps to size up safety valve opening status - if the valve is opened High-precision displacement transducer measuring range 0 - 5mm Accuracy: 0.05% VF method: VF probe: to monitor safety valve opening status Stereo earphone: monitor VF probe result Application environment: industrial and mining enterprises with complicated noises. 10. Initiating pressure error of measurement: 0.5%. 11. Data Storage: The instrument will automatically store 2000 sets of measuring data. 12. Professional data management software can auto create verification report according to the testing data. Technical Parameters: Model No.: ATF 3000 Operating system: Windows win 07 LCD screen: 10.4 inches touch screen, supporting outdoor operating External lifting pressure: 0-30KN (could have 50KN extra pack) Accuracy: 0.05% Force sensor range: 200Kg, 500Kg, 2000Kg,2000/5000Kg Services & Ways of Transport: Services: 1. Best price & warming service & high quality & Frontline technics; 2. OEM services available; 3. Detailed photos will be sent to you before shipment. Shipping ways: 1) By sea; 2) By air;
Trichloroethylene Also known as: Ethylene Trichloride 1,1,2-trichloroethylene, Chlorylene Molecular Formula: C2HCl3 Molecular Weight: 131.39 CAS No.: 79-01-6 IMCO: 6.1 UN No.: 1710 Product Specification: Item Index Appearance Colorless transparent liquid Trichloroethylene, % min 99.3 Color, max. 15 Water, % max 0.01 Acidity in HCL, % max 0.001 Alkalies in NaOH, % max 0.025 Free Chlorine, % NIL Non-volatile residue, % max 0.005 Acidity after oxidation, % max 0.02 Density by 20, g/cm3 1.460-1.466 Distillation Test (0 101.325KPa) Boiling point Initial, Boiling point Final, 85.5 91 Application: Metal degreasing, as anextraction solvent for oils, fats and waxes Solvent dyeing Dry cleaning as a refrigerant and heat exchange liquid Diluent in paints and adhesives Textile processing Chemical intermediate and aerospace operations (flushing liquid oxygen). In organic synthesis it is used as a fumigant, medicine and in cleaning and drying of electronic parts Packing: TCE is packed in 200L steel drums (UN approved), 280kg net per drum. 22.4mt net in 80 drums per 20s FCL. Bulk product should be transported by tank-trucks in accordance with the relevant safety requirements. Transportation: in transporation, crashing and mixing with acid, oxidant, food and food additives, rain, solarization, high temperature should be avoid. Bottled products should be stored in well-ventilated shed with the treasury or away from the fire source, heat source, a single place, can be stacked. Health Protection: TCE smells like chloroform, and will explode in case of fire or high-heat; it will react with strong oxidizer; it will ventilate phosgene and corrosive hydrochloric acid fumes in case of UV irradiated or heated. Gas masks, eye wears, anti-chemical protective gloves are needed when handling to avoid damage to nervous system. Our advantage: We applied the first-class gas catalyst technology. Our instrument control system is Honeywell DCSC300. Our TCE purity could reach over 99.99% before adding stabilizer.
Magnesium Oxide Board (or MgO Board) is a technologically advanced building material that offers superior performance in every category when compared to traditional wood, gypsum and cement based products. Magnesium Oxide Board is virtually impervious to fire, water, insects; does not feed mold or mildew; is non-toxic, non- flammable and non-combustible; is durable, maintains its dimensional stability-even when wet; and, has exceptional bonding surface. Magnesium Oxide Board is a mineral based green builder product. And it is homogeneous-no de-lamination. Features: WATER RESISTANCE Magnesium oxide inherently has very low water absorption and any moisture is naturally expelled. There is also no deterioration from freeze/thaw cycles. VERSATILITY Whether used on its own as a sheathing, wallboard or underlayment, or in conjunction with other building materials such as plywood, OSB or drywall, it can add tremendous value. MgO has an unlimited number of uses. Fire retardant plywood and OSB, demising walls and insulated exterior wall panels are some of the initial products that offer enormous performance-to-value propositions. FIRE RESISTANCE Magnesium oxide boards are essentially non combustible, with a flame spread of ZERO and a smoke development of ZERO.These properties make it highly effective either standing alone as a sheathing/underlayment or when laminated to other materials. IMPACT RESISTANCE While having the appearance and texture of cement or stone, magnesium oxide board has excellent flexure and tensile properties. All of these properties combine to produce a board with vastly superior impact resistance. Item Index Unites Density 0.9-1.2 g/cm³ Flexural strength â?¥14 Mpa Absorb water saturated flexural strength â?¥16 Mpa Moisture Movement â?¤0.30 % Thermal movement â?¤0.02 % Combustibility Incombustible class A Content of chlorine
HBIS Lines Up Investment in Peru Iron Ore Mine HBIS Resources Co Ltd, a unit of China second-biggest steelmaker HBIS Group, said on Monday it had signed an initial deal to develop the Pampa de Pongo iron ore mine in Peru alongside current licence-holder Zhongrong Xinda. The two Chinese companies plan to set up a joint venture to work on the first stage of the mine, which also contains copper, cobalt and gold reserves, an HBIS Resources filing to the Shenzhen Stock Exchange showed. The scope of cooperation includes mine and port construction and operation, it added. No value was put on the framework agreement, which was signed on July 31 and will serve as a basis for negotiations between the two firms. Investing in Peru, the worlds second-biggest copper producer after neighbouring Chile, would be HBIS first foray into South America. It coincides with steady demand from Chinese steel mills as prices of iron ore, the main steel-making ingredient, top $100 a tonne. Qingdao-based Zhongrong Xinda acquired the rights to Pampa de Pongo in 2016 and its subsidiary Jinzhao Mining Peru is the projectâ??s operator. A portfolio published by Peru Ministry of Energy and Mines in October 2018 said Pampa de Pongo, in the Arequipa region, could produce 28.1 million tonnes of iron per year and was expected to start operations in 2023. It put the investment required at $2.2 billion. Peru in mid-March imposed a mining lockdown to curb the spread of the new coronavirus, but has since eased restrictions. The country has reported more than 400,000 confirmed coronavirus cases and more than 18,000 deaths from covid-19, the respiratory disease the virus causes.
N&N Plastic Recycle Industries have Ultra Cleaning Facilities: Cold Water Washing, Turbo Detergent Washing, Friction Washing etc. Drying: By Hydro dryer and cold air blowing method. Dust Removing: By Sheaving Machine and Aspiration Details of the Products: Materials: Polyethylene Terephthalate/PET Color: Natural/Clear/White, Green. Wash: Cold water Wash Cleaning : Cold water washed several times Grade: Clean, Washed and Hydro dry Type: Waste Pet Bottle Flakes Size: 25-35 mm or as per your preference PVC Content : 0.002% maximum or Less than 200 PPM Moisture : 0.2 % Maximum Melting Point: 240º-260º Degree C. Metal Content: Nil Contamination : No labels, No caps, No rings Applied: Polyester Staple Fiber, PET Sheet, PET Strapping, PET Granules Utilized: Produce Synthetic Fibers, Beverage and other Liquid Containers, Food Packaging Packing: 25 Kgs/Woven Bag or as per your preference Shipping Mode: EXW/ FCA/FOB/CFR Sea Port: Chittagong / Mongla Payment Mode: T/T. Minimum Order Qty: 20/MT in 1 x 40' Container Our producing capacity: 100 Metric Tons per Month initially and it will increase Delivery Times: 35/Days after receiving payment and order confirmation Inspection: Any internationally reputed survey organization at Buyer cost. Sample: Free provide sample through by collected courier Country of Origin: Bangladesh.