ASTM B163 is the Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tubes. This covers outside diameter and average wall, or outside diameter and minimum wall tube. The tube shall be furnished in the alloys and conditions defined by this specification. The ASTM B163/ASME SB163 material shall conform to the composition limits of nickel, copper, molybdenum, iron, manganese, carbon, silicon, chromium, aluminum, titanium, phosphorus, cerium, and zirconium, yttrium, boron, cobalt, columbium, tungsten, and nitrogen specified. Tensile strength, yield strength, elongation, and Rockwell hardness of the material shall conform to the required Mechanical Properties set by this specification. Test methods such as chemical analysis, tension, rounding procedure, Rockwell hardness, grain size, and hardness conversion shall be performed for qualified ASTM B163/ASME SB163 alloy tubes. ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE PROVIDED BY YUHONG ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube The most popular materials under ASTM B163 Standard are: UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825). Incoloy 800/N08800 Nickel Alloy Pipe/Tube Incoloy 800H/N08810 Nickel Alloy Pipe/Tube Incoloy 800HT/N08811 Nickel Alloy Pipe/Tube Incoloy 825/N08825 Nickel Alloy Pipe/Tube Inconel 600/ N06600 Nickel Alloy Pipe/Tube Inconel 601/ N06601 Nickel Alloy Pipe/Tube Monel 400/N04400 Nickel Alloy Pipe/Tube Nickel 200/N02200 Nickel Seamless Pipe/Tube ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE FEATURES Nickel alloys tube under ASTM B163 can meet the High Strength and corrosion resistance in a range of media including sea water, hydrofluoric acid, sulphuric acid, and alkalies. ASTM A163 Coiled Tubing is highly resistant to corrosion in different environments. This tubing enables the speed of the operation to be fast at the same time, it is very safe and easy to run. ASTM B 163 Tubing is used in applications for drilling, logging, fracturing, perforating, and production operations. These tubings have a lower environmental impact. If you are looking for a reliable ss pipe company, don't hesitate to contact us!
Cobalt molybdate, copper, nickel, calcium molybdate, casting powder, ferro vanadium, ferro molybdenum, ferro nickel, ferro nickel, molybdenum zinc oxide.
sodium bicarbonate (NaHCO3) Sodium bicarbonate , also known as baking soda, is used to relieve heartburn, sour stomach, or acid indigestion by neutralizing excess stomach acid. When used for this purpose, it is said to belong to the group of medicines called antacids. It may be used to treat the symptoms of stomach or duodenal ulcers 144-55-8 sodium bicarbonate (NaHCO3), white crystalline or powdery solid that is a source of carbon dioxide and so is used as an ingredient in baking powders, in effervescent salts and beverages, and as a constituent of dry-chemical fire extinguishers.
Sodium metabisulfite or sodium pyrosulfite (IUPAC spelling; Br. E. sodium metabisulphite or sodium pyrosulphite) is an inorganic compound of chemical formula Na2S2O5. The substance is sometimes referred to as disodium metabisulfite. It is used as a disinfectant, antioxidant, and preservative agent. [2] When dissolved in water it forms sodium bisulfite 7681-57-4
CaCL2 Dihydrate (72%, 74%, 77%) One type of inorganic salt that is both solid and liquid is calcium chloride. Solid calcium chloride can be a powder, granule, flake, or pellet with a white, crystallized form. It can be either dihydrate or anhydrous depending on the crystal water content. Clear and colorless, liquid calcium chloride is a solution. Due to the rapid dissolution, exothermic ability, ability to draw moisture from the air and surroundings, and ability to dissolve at extremely low temperatures of calcium chloride. CaCL 2 H20 Dihydrate (72%, 74%, 77%) Application Petroleum: drilling in oil fields, cementing, lubricating, and stabilizing mud layers. Most anions can be precipitated by calcium ions in water treatment.In addition to precipitating cations, chloride ions can oxidize ions to clean wastewater. Cryogen: A solution of calcium chloride is a crucial refrigerant used in freezers and ice makers. Used on parking lots, ports, roadways, and highways for deicing and melting snow. Pot is used as a dust-collecting and fog-removing agent on roads. As a dryer for materials such as sulfur dioxide, nitrogen, oxygen, and hydrogen chloride. In the process of making acrylic acid, ether, ester, and alcohol as a dehydrating agent. It can strengthen concrete's resistance to cold and increase its hardness. CaCL2 Calcium Chloride Dihydrate in Water(72%, 74%, 77%) Technical Index Item Calcium Chloride Calcium Chloride Dihydrate Anhydrous CaCl2 2H2O CAS 10035-04-8 10043-52-4 Chemical Formula CaCl2.2H2O CaCl2 Purity as CaCl2 74%min. 94%min. Alkalinity as Ca(OH)2 0.2%max. 0.25%max. Total Alkali Chloride (as NACL) 5.0%max. 5.0%max. Water Insoluble 0.15%max. 0.25% max. Fe 0.006%max. 0.006%max. PH 7.5-11.0 Total Magnesium (as MgCl2) 0.5%max. Sulfate (as CaSO4) 0.05%max. Appearance White flake, powder, granule, pellet White powder, pellet Standard Packaging 25kgs/1000kgs woven bags with PE liner inside or according to customer's request.
Tubular & flat products in stainless steel, nickel alloy, carbon steel, alloy steel as well as a series of special materials.Trade and export
Soft drinks, carbonated drinks, aloe vera juice, coconut water, energy drinks..
Dolph Microwave as experienced manufactures of satellite communication antenna offering various type of satcom antenna to solve communication. An satcom antenna can be used for both transmitting and receiving signals from the satellite including GEO, LEO and MEO etc.. Based on function, it can be divided into Rx only and Tx/Rx type. Rx only of mainly for broadcast and Tx/Rx are mostly for communication and others. They can provide access to satellite communications even in harsh environments. Types of Satcom Antenna Dolph Microwave satcom antenna can be divided into 3 types including earth station antenna, flyaway(quick deploy) antenna and Motorized Quick Deploy Antenna. The frequency band are available in single band, dual band and multi band like C-band, Ku-band, Ka-band, X-band, S-band and also C&Ku, Ku&Ka and S&X dual band. Besides the standard diameter with standard frequency range. It can also be customized based on customer requirement. Any requirement, please inform at any time. Main Parameter Required When Looking for Satcom Antenna Antenna type: Flyaway antenna, earth station antenna or quick deploy antenna Diameter: 1.2, 1,8, 2.4, 3.7, 4.5, 5.3 or 6.2 meter or big dish antenna Frequency range: L band, C band, X band, Ku band, DBS band, and Ka-band or others Polarization: Linear Pol. Or Circular Pol. Port: 2-port or 4-port or multi-port Drive mode: Motorized or manual type Installation site: Roof of building or ground Tracking type: Step tracking or monopulse type Reflector material: Aluminum or carbon fiber Application of Satcom Antenna Antenna is an important part of satcom communication system as the antenna RF signal input and output channel. The performance of antenna and microwave waveguide components affect whole system performance. The distance between antenna and satellite is far. To assure the signal effective transmission, most of the earth station adopts parabolic antenna. All of Dolph Microwave offered antenna is parabolic antenna with features is high gain and better directive. There are many waveguide manufacturers, but we are one of the best choices for you.
Name: Zinc Oxide CAS No.:1314-13-2 MF: ZnO EINECS No.:215-222-5 Appearance: white powder Shelf Life:2 Years Zinc oxide (ZnO), commonly known as zinc white, is an oxide of zinc. Insoluble in water, soluble in acids and strong bases. Zinc oxide is a common chemical additive, widely used in plastics, silicate products, synthetic rubber, lubricating oil, paint coatings, ointment, adhesives, food, batteries, flame retardant and other products in the production. Zinc oxide has large band gap and exciton binding energy, high transparency, excellent luminescence performance at room temperature, and has been used in liquid crystal display, thin film transistor, light emitting diode and other products in the field of semiconductor. In addition, microgranular zinc oxide as a kind of nanomaterial also began to play a role in related fields.
Zinc oxide, an inorganic compound with the chemical formula ZnO, is an oxide of zinc, insoluble in water, ethanol, soluble in acid, ammonium chloride, is a commonly used chemical additive, widely used in the production of plastics, silicate products, synthetic rubber, lubricating oils, paints and coatings, ointments, adhesives, foodstuffs, batteries, flame retardants and other products.
Product Description Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.  Popular Products Our paraffin wax are kunlun brand from Petrochina (Fushun Petrochemical Company and Daqing Petrochemical Company).Mainly Products are fully refined paraffin wax, semi refined paraffin wax and crude paraffin wax with the melting point of 54/56/58/60/62/64.      (1)Fully Refined Paraffin Wax 58/60             (2)Semi Refined Paraffin Wax 58/60             (3)Fully Refined Paraffin Wax 56/58       (4)Fully Refined Paraffin Wax 60/62          (5)Fully Refined Paraffin Wax 64/66                (6)Crude Paraffin Wax 58/60   Product Parameters  Item Value Test method Grade #52 #54 #56 #58 #60 #62 #64 #66 Melting point, °C 52 54 56 58 60 62 64 66 GB/T 2539 54 56 58 60 62 64 66 68 Oil content, %(mass) 0.5 GB/T 3554 Color, Saybolt scale +27 +25 GB/T 3555 Max light stability 4 5 SH/T 0404 Penetration, (25°C),1/10mm 19 17 GB/T 4985 Kinematic viscosity, (100°C),m/s Report GB/T 265 Odor number 1 SH/T 0414 Water soluble acid/base Not detected SH/T 0407 Mechanical impurity & moisture Not detected Visual inspec
Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.
Molecular Principal Chain: Carbon Chain PolymerColor: YellowRaw Material: 100% HardwoodMaterial: wood Sawdust , Bamboo/White PineProduct Pellets FuelPacking: 15kg/Bag
Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm
Model No. GPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.05/0.2-0.4% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Model No. CPC Fixed carbon(Min) 98.5% Ash(Max) 0.8% Volaltie matter(Max) 0.7% Sulfur(Max) 0.5/3% Moisture(Max) 0.5% Size 0.2-1mm,1-5mm,4-7mm
Semi coke Model No. SC-01 SC-02 Fixed carbon(Min) 84% 84% Ash(Max) 8.0% 8% Volaltie matter(Max) 8.0% 8.0% Sulfur(Max) 0.35% 0.35% Moisture(Max) 18% 3% Size 8-18mm,18-35mm,30-60mm,0-1mm,1-3mm
Metallurgical coke Model No. MC-01 Fixed carbon(Min) 85% Ash(Max) 13.50% Volaltie matter(Max) 1.5% Sulfur(Max) 0.8% Moisture(Max) 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke Model No. FC-01 FC-02 FC-03 Fixed carbon(Min) 90% 88% 86% Ash(Max) 8% 10% 12% Volaltie matter(Max) 1.5% 1.5% 1.5% Sulfur(Max) 0.6% 0.6% 0.6% Moisture(Max) 7% 8% 8% Size 10-30mm,20-40mm,30-80mm,90-150mm,120-250mm
Foundry coke is widely used in iron making because of its special physical and chemical characteristics. It's the main cupola molten iron fuel, foundry coke plays an important role in melting furnace charge and overheat the molten iron, support stock column, maintain good air permeability. Therefore, foundry coke with large size,low reactivity, low porosity, sufficient impact resistance and crushing strength, low ash and sulfur content, it is popular in the international markets.
