SmartSkin Performa CO2 laser is the latest generation and the most sophisticated of laser in tissue rejuvenation and skin resurfacing technology with fast, visible results and minimal downtime. Fractional photothermolysis with a CO2 laser shows promise in the treatment of photodamaged skin. The purpose of this study was to evaluate a fractional CO2 laser device (SmartSkin, Cynosure, Westford, MA) for the treatment of facial photodamage. Cynosure Smartskin Fractional CO2 Laser; Excellent Cosmetic & Operating Condition; Manufactured 2014; Reason for Selling: Downsizing; Includes: Scanner Handpiece, Footswitch, Key,Operator Manual. System Type:Co2 Wavelength:10,600 nm Power:30 W (max) Output Mode:Multimode Method of optical output:Articulated Arm Aiming Beam:Laser Diode, 3 mW @ 635-670 nm Electrical Requirements:100-115 V / 10 A (max) /50-60 Hz Size: 46.1³ H x 18.1³ W x 24.00â?³ D (117 cm x 46 cm x 61 cm) Weight:108 lbs (49 kg) Evacuation System:Buffalo Filter Smoke Evacuator â?? Available Separately Scanner: Scan Area Size:15 mm x 15 mm (max) Spot Size:350 um Scan Mode:Normal, Interlaced and Autofill*, *Not available in ablative mode Mode:Super Pulsed Pulse Duration:0.2 ms 2.0 ms (Fractional Ablative); 0.2 ms â?? 20.0 ms (Ablative) Density:1 78% (Fractional Ablative; 78% (Ablative) 4â?³ Surgical Handpiece: Spot Size d63:0.214 mm Mode:Continuous, Pulsed and Super Pulsed
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at 240 °C (400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings Processing Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon FEP D50. A FEP resin coating on woven fabrics made of fiberglass, fiber, or other high-temperature resistant fibers, can be made by dip coating. Successive passes may be necessary to build the desired thickness to produce a smooth, crack-free coating. Each coating layer is usually dried to remove water (typically at 120 °C [250°F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), and then heated above the crystalline melting point of the resin particles (approximately 265 °C [509 °F]). If the Everflon FEP D50 is being used as a top coat over a PTFE-coated fabric or other parts, the coating must be heated to melt the PTFE (approximately 337 °C [639 °F]) to maximize adhesion. Other solid or liquid ingredients can be added to Everflon FEP D50 to provide specific processing or finished product behavior
We use the most advanced anti-corrosion efficient ultra-fine fiber coagulation material as the filter body, so that the compressor output air 3m above the solid particles can be all filtered, and very little about 0.01-m oil and water dissolved in the filter When the condensate into a larger oil droplets, accumulated in the bottom of the filter, and then through the bottom of the filter tank back to the siphon pump back to the lubrication system so that the compressor discharge more pure, oil-free compressed air. Technical Parameters 1. Filtration efficiency 99.999% 2. Service life 3500-5200 hours 3. Filtration accuracy: 0.1�¼s 4. Filter material used US HV company glass fiber 5. Compressed air oil content can reach 3ppm or less We also supply other replacement brands air compressor filter: Atlas Copco air compressor filter element Ingersoll Rand air compressor filter element Fusheng air compressor filter element SULLAIR air compressor filter element CompAir air compressor filter element LIUTECH air compressor filter element Screw air compressor Pipe line filter element isused to filter different dismissal of stainless dry stock,corrosion resistance, superior structural performance; seam welded for extra strength, low resistanceto flow. Different accuracy levels of different filter structure,a new "matrix blended fiber" media, larger effective surface area, improves capurerate, enhanced filtering effect. Coated closed cell foam sleeve with resists chemical attack from oils and acids, ensures high efficiencies by preventing reentrainment of coalesced liquids. Advantages: 1.Duarbility and longevity 2.Beautiful design 3.High quality with reasonable price 4.Afford good service 5.Produce according to your sample or drawing 6.Each product individually tested Features: 1.Type:Precision Filter, Filter 2.Filter material: imported fiberglass, filter felt 3.Filter accuracy: 0.01um 4.Application: air compressor 5.Weight:0.5kgs 6.service time:8~12 months 7.sealing material:NBR, VITON 8.Oil content:0.003ppm 9.Flow rate:5Nm³/min
BERRI coir substrates are optimal and ideal pot Media to cultivation of Tomato, Cucumber, Capsicum, Berry plants in Hydroponic Green house container cultures. Pick Best and optimal Berri Coco Substrates to farming of cucumber, tomato, bell pepper and berrys grow by container cultures in Hydroponic green houses Berri coco substrates are exported to garden supply companies, and retail stores. Graded Coconut coir fibre, husk chips and coco crushed materials are compacted as a small cube bricks. Its lightweight and easy to handle. This coir substrates is available in 1 gallon to 10 gallon sizes variety of pot sizes. Such as excellent water retention, aeration, drainage, and nutrient availability.Its holding around 30% more water than most peat. This special mixture offers superior drainage and air circulation as well as a nutrient content that reduces the risk of root rot. Minimizes harmful pathogens and reduces the risk of pests: This medium boasts antifungal properties, which keeps the roots happy pH-neutral nature, which means there is no need for additional adjustments. It an ideal choice for those seeking sustainable and healthier plant cultivation methods.This not only decreases its carbon footprint; it also ensures that coco coir is a budget-friendly option. BERRI affordable Coco mix blocks highly optimal growing media for tomato, cucumber,berry and capsicum farm cultivation by containers in hydroponic indoors. We at BERRI COIR SUBSTRATE guarantee promised expansion and EC for our products.Products are application centric designed for specific usage BERRI COIR SUBSTRATE guarantee promised expansion and EC for our products. 1.BERRI - BL 30 /COCO MIXED BLOCKS / BRICKS MIXING : COIR 75 % +CHIPS 20 % +COCO CRUSH 2%+ FIBER 3 % WHC: 6.75 Lt/ KG AIR PORACITY: 10.1 % 2. BERRI BL 50/ COIR MIXED BLOCKS / BRICKS / SLAPS / 1 KG / 650 GRAM MIXING : COIR 45 % +CHIPS 50 % % + FIBER 3% + COCO CRUSH 2% WHC: 5.75 Lt/ KG AIR PORACITY: 22.1 % 3. BERRI BL RH 20 / COCO MIXED BLOCKS / BRICKS MIXING : COIR 25 % +CHIPS 50 %% + FIBER 3% + COCO CRUSH 2%+ RICE HULLS 20% WHC: 5.90 Lt/ KG AIR PORACITY: 24.2 % 100% natural. Ideal air to water ratio for hydroponics.
SALIENT FEATURES SODALTECH manufactures various models and types of Machines, Equipment, Spare Parts needed mainly to manufacture Paper Pulp Moulded products generally made from Waste Boxes, Papers, Indian Pulp, Taiwan Pulp, Korean Pulp, Canada Pulp, China Pulp, Thailand Pulp, Indonesia Pulp, Southern Pulp etc, most of the Paper & Paper based Paper Waste can be recycled using SODALTECH Equipment. The production lines are simple to operate and maintain. It has high productivity, easy interchangeability of mould tooling, consumes less energy with less manufacturing cost, faster setting time etc, It can be upgraded to next higher level of production by adding less number of additional machines. Various models and ranges are available in Wet Moulding & Dry Moulding Process (Fine Moulding). The range of products that can be made are endless. Few examples are Egg Trays (30-cell) Egg Box/Carton (6-cell,10-cell, 12-cell, 6+6 â?? cell, 18 cell) Egg Carton of multi cavity sizes, Can Shell types, Apple Tray, Fruit Tray, Tomato Tray, Pear Tray, Orange Tray, Cup carriers used in fast food outlets (4 pack, 2 pack) Hospital and Medical Care products (like Bed Pan Sleeves, Male Urinal Bottle, Female Urinal Pots, Kidney Tray, Bowls) Nursery Pots, Seed Pots (Jiffy Pots), Industrial Packs (Packing Buffers) Electronic Products Packing Pads and Paper Trays, Tableware etc. Advantages of SODALTECH Paper Pulp Moulding Machines Machines Sophisticated yet easy to operate Rust protected solid steel construction Fast interchanging of moulds with dryer linking optionv User friendly control panel with low maintenance service system Low cost of production due to less power, space and labour Choice of end product colors Water proof products by using additives High and fast return on investment Range of Moulding Machines popular in market. BASIC MODEL EGG TRAY MACHINE :-This is used mainly for entry level or sampling purposes. The Machine will have basic requirements like Forming Mould & Transfer Mould, Vaccum Pulp, Water Separator etc. This can be on Wet Moulding (Wet Molding) or Dry Moulding (Fine Moulding) process.This model Machines are available to make Carboard Egg Trays, Carton Egg Trays, Disposable Pulp Tableware, Finery Pack, Fruit Tray, Cardboard Lids, Paper Based Packaging, Poultry Products, Trays, Quality Egg Trays, Quality Egg Boxes, Quality Table Wares, Thermoformed Fibre. The Basic Model Machines/Lines are available in following major ranges or as per the customer requirements. Fruit Tray Line Machines for Paper Based Packaging Pulp Moulding Production Lines for Industrial Packing Tableware Machines Tableware Equipments Quality Egg Tray Making Plant Quality Egg Box Making Machine Advanced Pulp Moulding Technology Disposable Pulp Tableware Production Lines Fine Pulp Molding System Pulp Male Urine Bottle Moulding Machine Pulp Tableware Line Tool and Die set Manufacturing Wet Type Pulp Moulding Machine
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing. FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products. Copper Thickness:18um,25um,35um,70um Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm Size:37*49inch, 41*49inch,43*49inch Color: Yellow/Green Brand:Chifeng Style: Laminated Fiberglass Board Use: PCB,Electrical, electrical, power, drive Side: Single side and Double side
Hello i'm from indonesia Qur company produce rice bran and rice husk powder .Qur company can produce 30 metric ton everyday. RICE Bran using for cattle feed ,poultry and other animal feed. Our main objective is to satisfy our customers and build a good relationship with them in future. We have the best quality available in stock and we are ready to supply as per your order. Our main market Worldwide: America, Middle East, Asia, Eastern Europe. We supply in small and large quantity and competitive price.We are happy to offer you on the following term and condition:� MOQ:1Cotainer 20ft Shiiping port:Surabaya,tanjung perak Specification: MOISTURE:12% Crudefat:12% Protein:14% Ash:9% Fiber:9% Husk:6% Exwork:price: /metric ton Hope we good partners
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing. FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products. Copper Thickness:18um,25um,35um,70um Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm Size:37*49inch, 41*49inch,43*49inch Color: Yellow/Green Style: Laminated Fiberglass Board Use: PCB, electrical, power, drive Side: Single side and Double side
ICUMSA 45 Sugar Origin Brazil Specifications White Refined Sugar Polarization 99.80 degree min Ash Content 0.04% max Moisture 0.04% max Granulation Fine 100% Soluble Shipped Dry and Free Flowing Radiation Normal certified, without presence of Caesium and Iodine Color White Substance Solid, Crystal Magnetic Particles MG/kg 4 So2 MG/kg 20 Packaging: 10, 25, or 50 Kg polythene lined bags Other types of white sugar include ICUMSA 100 and ICUMSA 150 Please contact us for your orders. Thanks ### Key Export Products Coffee Creamer Sugar and Sweeteners Starches and Derivatives Alcohol and Ethanol Proteins and Fibers Feed and Pet Food Ingredients Bioenergy and Green Chemistry
Descriptions : Superflow: try using super absorbency tampons if your flow is medium to heavy. LemmeBe's Heavy Flow tampons are sustainable, biodegradable, chemical-free & very small in size that makes young girl's heavy day feel light and light days feel even lighter. Without being exposed to any pesticides, we responsibly sourced 100 % certified organic cotton for peace of mind. LemmeBeâ??s sustainable period's product goes forward to ensure an eco-friendly system. Features : Core fibres : Made of certified organic cotton, help in absorption of mentural pad. Grooves : Help in absorption and distribution of blood. String : Certified organic cotton, hydrophobic cord, helps in removal of tampons. Outer layers : Certified organic cotton, non woven and perforated film to hold insertion and removal of tampons, keep the fibers intact and absorb blood.
It's a mixture of tofu cat litter and bentonite cat litter in a certain proportion. It has the same effect as cat litter and can be thrown into the toilet without clogging. Economic benefits, Safe, Eco-friendly, and Natural, eat OK, the main ingredient is the bean residue, corn cob, bentonite, etc, (bean residue is 100% food grade raw material). Great clumping effect and good absorption, could absorb cat's urine in few secends , then clumped, easy for cat owners to scoop out and flushed into toilet directly. Good ability to eliminate odor, deodorant and anti-bacterial. Material: pea fiber; bentonite Particle: Stripes + Sphericity Particle size: 1.2-3.0mm Color: white, pink, grey, blue, purple, pink ect
It's a mixture of tofu cat litter and bentonite cat litter in a certain proportion. It has the same effect as cat litter and can be thrown into the toilet without clogging. Economic benefits, Safe, Eco-friendly, and Natural, eat OK, the main ingredient is the bean residue, corn cob, bentonite, etc, (bean residue is 100% food grade raw material). Great clumping effect and good absorption, could absorb cat's urine in few secends , then clumped, easy for cat owners to scoop out and flushed into toilet directly. Good ability to eliminate odor, deodorant and anti-bacterial. Material: pea fiber; bentonite Particle: Stripes + Sphericity Particle size: 1.2-3.0mm Color: white, pink, grey, blue, purple, pink ect
FR-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and CCL is finally formed by hot pressing and curing. FR-4 CCL sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (PCB) for television sets, computers, communications equipment and other electronic products. Copper Thickness:18um,25um,35um,70um Board Thickness: 0.8mm,1mm,1.2mm,1.5mm,1.6mm Size:37*49inch, 41*49inch,43*49inch Color: Yellow/Green Brand:Chifeng Style: Laminated Fiberglass Board Use: PCB,Electrical, electrical, power, drive Side: Single side and Double side
Class I Division 2,Group A,B,C,D Zone 1, Zone 2 Class II Division 1,Group E,F,G Zone 21, Zone 22 Class III Type 4Xï¼?IP66 Ex d e IIC T6 Gb Max.32A Ex tb IIIC T80 Db IP66 Built-in Switch Born for extreme corrosive environment such as strong acid, strong alkaline, electrostatic discharging areas, SW-B series explosion proof switch is a special presence and usage to replace other traditional metal material of explosion proof light switch. Application for low temperature rise electrical material for components and increased safety glass fiber reinforced polyester housing, this model can be used as zone 2 light switch, division 2 for switch and anti spark power switch.
Material: Wood fiber + PE Thickness: 50-70 gsm (usually 50gsm, 60gsm, customized) Width: 40-1000mm (usually 60mm, 70mm, 100mm, customized) Sealing Temperature about 120 ( Celsius degree) Ink Type: Water-base ink Printing: Blank/Common English or customized design printing Capacity: suitable for 0.5g, 1g, 2g, 3g, 5g, 10g, usually no more than 20g; Application: Silica Gel, Bentonite Clay, or any other global beads materials Feature:1>Easy pack by machine, fast speed; 2>With holes on surface to pass moisture; 3>Stronger strength than filter paper; 4>Customize thickness/width/printing available;
This MDF set is popular for its modern, minimalist design and practicality. MDF, or Medium density fiberboard, is an affordable and durable furniture material. It is made of wood fiber and treated with high temperature and pressure to make the surface smooth, strong and able to withstand wear and tear in everyday use. In appearance, this table adopts a classic round design, simple and yet stylish. The white tabletop with natural wood-colored legs not only provides plenty of space for a variety of activities, but is also compatible with a variety of interior decoration styles. Its unique tripod design not only stabilizes the entire structure, but also gives the table a sense of lightness, making it a highlight in the home space. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
The seat and armrests of the Velvet Petal Armchair are made of soft and comfortable velvet material, which makes people feel very comfortable when sitting on it. At the same time, the petal-shaped armrests also allow people to naturally stretch their shoulders and arms, reducing fatigue caused by long working hours. feel. The design of the velvet petal armchair is usually very delicate and beautiful. The petal-shaped armrests and streamlined seats show its fashion and elegant taste. At the same time, the fiber texture of velvet can reflect soft light, giving people a warm and soft feeling.Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
MDF (Medium Density Fibreboard) is a denser board made by pressing wood fibers with glue. It has high strength and stability, can bear heavy weight and keep the desktop flat and stable. It can be decorated and treated by painting, veneering, spray painting, etc., so it can present a variety of appearance effects. For this small side table, the combination of MDF tabletop and wooden triangular legs not only retains the natural texture of the wooden material, but also shows a modern and simple style, making the entire coffee table more fashionable and attractive. Compared with solid wood coffee tables, MDF triangular wooden leg coffee tables are usually lighter and easier to move and place. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
The seat and armrests of the Velvet Petal Armchair are made of soft and comfortable velvet material, which makes people feel very comfortable when sitting on it. At the same time, the petal-shaped armrests also allow people to naturally stretch their shoulders and arms, reducing fatigue caused by long working hours. feel. The design of the velvet petal armchair is usually very delicate and beautiful. The petal-shaped armrests and streamlined seats show its fashion and elegant taste. At the same time, the fiber texture of velvet can reflect soft light, giving people a warm and soft feeling. Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
Quality Premium Origin South Africa, Turkey, Brazil, Canada, Ukraine upon best availability Moisture Max 14 % Foreign maters Max 1.5 % Heat Damage Kernels Max 0.5 % Max damaged Kernels Max 5 % Toxic grains Max 2/-3(seeds in 100) Protein Max 8 % FAT Max 3 % FIBER Max 2.7 % Admixture Max 1.0 % Total Ash Max 1.5 % Discoloration Max 1.0 % Impurities Max 14 % Total Aflatoxin Max 20.0 PPB T.V. N Max 50 % E. coli, salmonella, insect Max 0 Mold Max 105.0 Radiation NONE Crop year RECENT Deoxynivalenol (vomitoxin) Max 5.0 PPM