Material: Radiata Pine, Larch Glue: Melmaine, WBP glue Size:38*225*3900/5900mm or customized Standard: OSHA Application: Construction Market: Middle East, South-East Asia market
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Products name: lvl beam Specification Core: poplar, , pine, red hardwood core Glue: melamine glue, wbp glue, f4 star glue F&b: okoume veneer, red hardwood veneer, as customer required Size: 1220x2440mm, as customer required (max length 8000mm, max thickness 300mm) Production ability: 6, 000 cbm per month. Wooden pallets, steel band and carton.
Size: up to 8 meters, generous any size according to customer requirements sawing, 100% utilization Recommended dimensions: thickness: 38mm & 42mm width: 225mm & 235mm length: 3 meters or 3.9 meters or 6 meters. Glue: Melamine glue (melamine glue), phenolic glue (WBP glue) Structure: cis structure to the LVL structure or LVB Material: Radiata Pine, imported from New Zealand radiata pine, Pinus massoniana pine Panel: double-sided polished, non-slip, construction workers safer Side of the board: the four corners chamfering, to facilitate construction workers handling is not difficult to handle Ends: scraping waterproof Putty, then spray waterproof paint, waterproof, corrosion Simple domestic auto transport packaging or standard export strip and plastic film packaging. Usage: This product is mainly used for the scaffolding on the building pedals. Structure stent for use in residential and commercial construction, fasting joists and light steel beams, scaffolding boards and prefabricated workers beam flange structure parts, etc. Features: 1 Product Features: The product on the basis of only oily material waterproof pine in this WBP phenolic glue waterproof glue production has increased substantially and the waterproof performance of the products, especially suitable for building pedals and construction scaffolding and other building. Board is pretty reasonable price positioning, versatile, environmentally friendly, boiled for 72 hours not a plastic, high strength, fire prevention, pest control role, not a plastic, not broken, no deformation, loading capacity, tough Good A large number of export market of Japan, South Korea, export fumigation. Pine LVL produced by our company to do the pedals, not a plastic boiling water 72 hours, the surface sprayed with a waterproof paint, the more waterproof, corrosion, decay, customers are welcome to visit our company I Secretary of the size and strength. 1) Inner packing: inside pallet is covered with 0.2mm plastic bag; 2) Outer packing: by pallet, wrapped in carton, reinforced with iron belt, 3) Seaworthy packing
1, Material: Poplar / Pine / Hardwood 2, Specification: 10 ~ 300MM (thick) * any * 12 m long (12 meters or less arbitrary sawing) 3, Glue: MR glue / green glue / water glue / WBP glue Features: export fumigation materials, strength, and straightness is a good alternative to solid wood products the test report: the RoHs 6 testing, environmental testing. Note: thickest can reach 300MM. Poplar LVL (excellent material for fumigation tray) Product Features: The Veneer level material, referred to the LVL is based on the logs as raw material, peeling or slicing made of veneer dried glue after the billet, parallel to the grain or most parallel to the grain group, and then glue made by hot pressing plate It has wood sawn timber does not have structural characteristics: high strength, toughness and good stability, and accurate specifications, the three-fold increase in strength, toughness than wood lumber. This product can be used in the construction template components, construction beams, carriage board, furniture, floor, room decorating wood keel and packaging materials, a wide range of applications. LVL timber and wood lumber comparison, we can see that the LVL has many ordinary wood lumber does not have the advantages of: LVL material may be scar section of logs, cracks and other defects scattered, staggered, thereby greatly reducing the impact on the intensity, its quality is stable, uniform strength, material variability, is an alternative to the structure of the wood the best material; 2, size can be adjusted freely, without the impact of timber shapes and defects, the Company's production of LVL products, up to 8 m, and finally up to 150MM, according to their own material situation, feel free to cut pieces and select the sizes. Utilization of raw materials up to 100%; 3, LVL processing and timber, as can be sawing, planing, cutting of the eye, open joints, nails, etc.; 4, LVL has the performance of pest control, anti-corrosion, fireproof, waterproof, mainly in the production process, the corresponding pretreatment or using a special adhesive; 5, LVL has a very strong shock resistance and shock absorption properties, as well as resistant to fatigue failure of the cyclic stress. 6, this green, pollution-free, in the process of making high-quality environmentally friendly adhesive. LVL products produced by our company in the meaning of the formaldehyde emission below the national standard, to achieve the standards for imports of developed countries, to ensure the health of your body. Packaging Details: 1) Inner packing: inside pallet is covered with 0.2mm plastic bag; 2) Outer packing: by pallet, wrapped in carton, reinforced with iron belt, 3) Seaworthy packing.
We are major in manufacturing lvl products, such as lvl scaffold planks, lvl batten. Lvl scaffold planks are the major one, raw material we use now for lvl is masson pine (p. Massoniana lamb). Adhesive we use are wbp glue. Standard we follow are osha and ansi a10.8, bs2482. We have two size 38.1íß225íß2440-6000mm for uae&europe market and 38.1íß235íß2440-6000mm for usa market. Plywood
HOA AN JSC is a manufacturer of plywood in Vietnam. Our factories are in Phu Tho/Thanh Hoa/ Lang Son province (the north of Vietnam). We are specializing in Furniture plywood/Film-faced plywood/Packing plywood/ LVL and Wood Pellets with competitive prices and good quality for the global market. Thickness: Custom as customers' request Length: greater than 4000mm Face/back: Pine/ Styrax/ Mixed light hardwood... Core: Pine, acacia,mixed hardwood,.. Glue: E0/E1/E2 Moisture content: greater than15% ) Usage: Furniture, pallets
LVL Scalfold Board
Consmos-- LVL/LVB 1) packing grade LVL, for pallet panel, crate panel,packing materials; 2) furniture grade LVL, for bed slat, bed siderail etc; 3) LVB for windows, doors frame and scanting; 4) Scaffolding board for construction
LVL Scaffold Board Introduction To Fushi Wood Lvl Scaffold Plank FushiPlank is an engineered wood product designed specifically for use as a scaffold plank. It is created by permanently bonding individual veneers together, using adhesive, heat and pressure, with the grain in each layer of veneer running parallel to the grain in the next.The unique process by which it is manufactured disperses the inherent defects found in solid sawn lumber. Natural characteristics such as knots and wane are rearranged to maximize strength and minimize warping and split. scaffold boards for sale Manufacture Standards:Â OSHA (Standards & Regulations 29-CFR)1926 Subpart L, Appendix A,BS 2482 Specification for Timber Scaffold Boards,AS1577-1993 scaffold planks Appendix A and Appendix B Core:Â Pine core and face Adhesive:Â Phenolic adhesive for exterior use Section Size:Â 38mm /42mmthickness and 225mm /230mm wide scaffold boards Moisture Content:Â Maximum 16% moisture Lengths:Â 1.0 m to 6.0 m length range available End Sealant:Â Acrylic end sealant for additional moisture protection Edge Branding:Â Permanent edge branding available at customer request Finish:Â Un-sanded faces, rounded edges, and painted ends We offer a number of different plywoods including hardwood faced general purpose plywood, birch plywood ideal for high-end joinery applications, and softwood structural plywood ideal for wall sheathing etc
Laminated Veneer Lumber (LVL) is another type of plywood. It is made of multiple layers of thin wood (along the same direction of wood fiber), assembled with adhesives through hot-pressing. Currently, the Fushi core veneers are mainly Poplar, Eucalyptus, Eucalyptus and Poplar mixed, Paulownia and Poplar mixed etc. lvl plywood Specifications Product name poplar bed slats plywood sheet bed wood Branding XINFUSHI Core material Poplar etc. Surface material Poplar,bleached polar,birch,beech,foil paper etc. Size range T:6-30mm,W:20-120mm,L:below 2000mm Tolerance Thickness +/-0.5mm,Width:+/-0.5mm,Length: -0/+1mm. Glue MR glue,E1/E0/F4S Moisture
Packing LVL Wood Timber Name Poplar lvl laminated veneer lumber Usage:Outdoor Grade:First-Class Main Material:poplar Formaldehyde Emission Standards:E2 Veneer Board Surface Finishing:One-Sided Decoration China Veneer Board Surface Material:Artificial Veneer material:poplar glue:E2 density:540kgs/cbm packing:as requested payment term:TT MOQ:10CBM
Laminated veneer lumber (LVL) Laminated Veneer Lumber (LVL) is another type of plywood. It is made of multiple layers of thin wood (along the same direction of wood fiber), assembled with adhesives through hot-pressing.� Currently, the core veneers are mainly Poplar, Eucalyptus, Eucalyptus and Poplar mixed, Paulownia and Poplar mixed etc. LVL Specifications Product name poplar bed slats plywood sheet bed wood Branding XINFUSHI Core material Poplar etc. Surface material Poplar,bleached polar,birch,beech,foil paper etc. Size range T:6-30mm,W:20-120mm,L:below 2000mm Tolerance Thicknessï¼?+/-0.5mm,Width:+/-0.5mm,Length: -0/+1mm. Glue MR glue,E1/E0/F4S Moisture
Product nameLVL,LVB Material Poplar, Combi, Birch, eucalyptus,or as your requirement. Glue:E0,E1,E2,WBP SizeLength upto 8000mm,wideth upto 1350mm, Thickness5-130mm Moisture8%~12% Thickness toleranceLess than 6mm+/-0.2mm to 0.3mm 7-130mm+/-0.4mm to 0.5mm PackingStandard package with carton or plywood and steel tape Loading Quantity20GP8pallets/22M3 40HQ18pallets/55M3 UsageBed plate,packing,construction,crates/pallets PaymentTT ,DP or L/C at sight CertificationCARB,
Excellent complexing and binding power towards alkaline earth and heavy metal ions. Binds metal ions over a broad pH region of 3-12. Does not have de- metalizing effect on dyestuffs. Premium dispersing properties. Acts as a protective colloid in reactive dyeing of cotton. Promotes levelness in reactive dyeing of cotton fabrics.
Very good stabilising and anti-catalytic effect in alkaline peroxide bleach. Ensures sustained release of nascent oxygen. Promotes degree of whiteness. Improves absorbency of fabrics. Prevents pin hole damage to fabrics, due to its excellent sequestering properties. Removes unfixed dyes with ease.
Premium dispersing and levelling agent for all types of disperse dyes. Provides brilliance, excellent fastness and softness. Biodegradable and eco friendly.
Very good neutralising agent for core alkali. Highly acidic sequestering agent. Eliminates alkaline earth and heavy metals completely. Improves whiteness significantly. Non volatile. Superior in performance over acetic and formic acids. Maintains pH even in extended storage times. Does not damage fibres, as is the case with mineral acids.
Powerful sequestering agent for calcium, magnesium and iron impurities. Very effective in acid demineralising process before dyeing. Works over a broad pH spectrum. Helps emulsifiers / detergents perform well by dispersing metal impurities.